CPU Interface 7njl6 No Expert setting

Tom's Hardware Forums » Motherboards & Memory » Chaintech » CPU Interface 7njl6 No Expert setting

CPU Interface 7njl6 No Expert setting

Show comments: By default All Good ratings Poor ratings

Word : Username : Filter :
Bottom
Author	Thread : CPU Interface 7njl6 No Expert setting

Anonymous

More Information

06-03-2005 at 02:49:28 AM

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

I am running the V2.0 2004/08/04 BIOS on this board. When I go into the
BIOS and select Frequency/Voltage Control I cannot find under CPU
Interface either Turbo or Expert. I only find Optimal or Aggressive. I
am looking to buy a new Barton to replace my aging Palomino 1700+. The
new processor will be clock-UNlocked. If I cannot select Expert, then I
believe I won't be able to set the Multiplier.

Any suggestions? Is it possible that the Turbo or Expert mode are not
available because the BIOS has been set to not offer these when a
clock-locked processor is installed? Or, were these options removed in
the latest BIOS?

Go to:

Tom's Hardware Forums » Motherboards & Memory » Chaintech » CPU Interface 7njl6 No Expert setting

Forum map
MyDiscussions.Net Forum, Version 2007.1
© 2000-2006 No1Dev

Page generated in 0.273 seconds

Google Ads

Taiwan Makers Consider Forming Standards-setting SSD Alliance

Published on December 11, 2007

Taiwan manufacturers in the NAND flash industry are probing the possibility of forming a solid state drive (SSD) alliance to work towards setting worldwide standards for a device promising to replace the hard disk drive (HDD) as the market mainstream, according to industry sources. Read more

FBI Wants Palm Prints, Eye Scans, Tattoo Mapping

Published on February 05, 2008

The FBI is gearing up to create a massive computer database of people's physical characteristics, all part of an effort the bureau says to better identify criminals and terrorists. Read more

NVIDIA Driver Bug In Doom III On Dual Display Systems

Published on August 04, 2004

Users running their PC in Dual Display configuration with a NVIDIA 6800 card will face low FPS and drops down to 3-4FPS in some areas of Doom III. But there's a way to fix it. Read more