USB2

[Andrew]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

I have installed a Sweex PCI usb2 hub and it is showing
up in hardware as standard enhanced PCI to USB host
controller or it could be via rev 5 or later usb
universal host controller. I'm not sure which one. I just
want to know if the right drivers have been loaded so it
works at the correct speed for usb2 or do I need to
update the driver to obtain full functionality?

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

You need to install SP1 or SP2 for USB2.0 functionality. If the words
Enhanced or 2.0 appear, you do have USB2.0 drivers.
--
Cari (MS-MVP Printing, Imaging & Hardware)
www.coribright.com

"Andrew" <andrewbmhremovethis@aol.com> wrote in message
news:308f01c4a3eb$28544570$a401280a@phx.gbl...
>I have installed a Sweex PCI usb2 hub and it is showing
> up in hardware as standard enhanced PCI to USB host
> controller or it could be via rev 5 or later usb
> universal host controller. I'm not sure which one. I just
> want to know if the right drivers have been loaded so it
> works at the correct speed for usb2 or do I need to
> update the driver to obtain full functionality?
>

 

[peter]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

enhanced=USB2
peter
"Andrew" <andrewbmhremovethis@aol.com> wrote in message
news:308f01c4a3eb$28544570$a401280a@phx.gbl...
>I have installed a Sweex PCI usb2 hub and it is showing
> up in hardware as standard enhanced PCI to USB host
> controller or it could be via rev 5 or later usb
> universal host controller. I'm not sure which one. I just
> want to know if the right drivers have been loaded so it
> works at the correct speed for usb2 or do I need to
> update the driver to obtain full functionality?

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Hi, sounds correct to me.....
Chris C
"Andrew" <andrewbmhremovethis@aol.com> wrote in message
news:308f01c4a3eb$28544570$a401280a@phx.gbl...
>I have installed a Sweex PCI usb2 hub and it is showing
> up in hardware as standard enhanced PCI to USB host
> controller or it could be via rev 5 or later usb
> universal host controller. I'm not sure which one. I just
> want to know if the right drivers have been loaded so it
> works at the correct speed for usb2 or do I need to
> update the driver to obtain full functionality?

 

[Mike]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

I have a similar problem. Asus P5AD2 Premium motherboard.
When I had SP1, everything worked fine. Once SP2 was
installed, all 8 USB 2.0 ports became recognized as 1.1
(no "enhanced"). I tried using a USB 2.0 device, and sure
enough, it worked at 1.1 speeds...which gets very
irritating when you copy files that are 1GB+. Any help
would be appreciated. Thanks in Advance,
- Mike