Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)
when i try to set the cpu ratio w/ jumper FIDJP1 to anything except short
#1-#2 , board will not boot?? what is the correct settins for the
2500XP(333FSB) ?? i tried 7.5 X 333 = 2500?? 7.5 = short #5-6 and # 7-8.
won't boot!!! this is after trying to set Bios to manual, clearing Cmos
etc?? i give up?? any info greatly appreciated. thank you pete rynas
Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)
ansered my own question , i think,looks like the barton only runs @around
1.8 duh
"Pete Rynas" <r566b@comcast.net> wrote in message
news:fPednTzrK8crdp_cRVn-gw@comcast.com...
> when i try to set the cpu ratio w/ jumper FIDJP1 to anything except short
> #1-#2 , board will not boot?? what is the correct settins for the
> 2500XP(333FSB) ?? i tried 7.5 X 333 = 2500?? 7.5 = short #5-6 and # 7-8.
> won't boot!!! this is after trying to set Bios to manual, clearing Cmos
> etc?? i give up?? any info greatly appreciated. thank you pete rynas
>
>
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.