Sign in with
Sign up | Sign in
Your question

SIS 755-a

Last response: in Motherboards
Share
October 11, 2004 3:40:50 AM

Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)

hi all

have a major problem with my board. i cannot get USB 2 enabled. its there as
i have had it working before i formatted though i do not know how, it just
started working. now even with the damned windows XP drivers that everyone
is supposed to use i cannot get my card reader to work in usb2 mode, the pc
just gives that error saying "hi speed device plugged into slow port" now i
have tried it in every port but the thing is the card reader has been on my
front ports and it was working around 2 weeks ago, i do not know what has
changed. i have service pack 1 installed and was thinking of installing an
XP without it and then it might work with the drivers from the disk that now
say "cannot install, please use the ones with ur operating system"

anyone know a way around this like replacing usb device drivers on the
system dir's or something??

anyone??

Dan

More about : sis 755

Anonymous
a b V Motherboard
October 11, 2004 5:29:24 AM

Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)

"smith" <none@none.com> wrote in
news:6Mjad.1557$yN5.1509@newsfe6-win.ntli.net:

> hi all
>
> have a major problem with my board. i cannot get USB 2 enabled. its
> there as i have had it working before i formatted though i do not know
> how, it just started working. now even with the damned windows XP
> drivers that everyone is supposed to use i cannot get my card reader
> to work in usb2 mode, the pc just gives that error saying "hi speed
> device plugged into slow port" now i have tried it in every port but
> the thing is the card reader has been on my front ports and it was
> working around 2 weeks ago, i do not know what has changed. i have
> service pack 1 installed and was thinking of installing an XP without
> it and then it might work with the drivers from the disk that now say
> "cannot install, please use the ones with ur operating system"
>
> anyone know a way around this like replacing usb device drivers on the
> system dir's or something??
>
> anyone??
>
> Dan
>

I have XP SP2 going and I'm using the motherboard mfg. drivers, (VIA) I
downloaded from their web site. It seems to be working fine.

If they don't have any mfg. drivers on the web site, you may want to try
removing all USB devices from the Hdw Device manager then reboot and let XP
install everything back. You may have to go into safe mode to remove all
the USB host controllers and hubs.
October 11, 2004 10:12:20 PM

Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)

> I have XP SP2 going and I'm using the motherboard mfg. drivers, (VIA) I
> downloaded from their web site. It seems to be working fine.
>
> If they don't have any mfg. drivers on the web site, you may want to try
> removing all USB devices from the Hdw Device manager then reboot and let
> XP
> install everything back. You may have to go into safe mode to remove all
> the USB host controllers and hubs.
>

how can you have the via ones installed ?? our board is an SIS chipset not
via ?

if you have managed it i would like to know how tho of course, have
installed SP2 now and it still will not work in USB 2 mode
Related resources
October 12, 2004 4:06:15 PM

Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)

how can you have the via ones installed ?? our board is an SIS chipset not
via ?

if you have managed it i would like to know how tho of course, have
installed SP2 now and it still will not work in USB 2 mode
Anonymous
a b V Motherboard
October 13, 2004 12:33:20 AM

Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)

Your 755-A main chipset is SIS, but may use VIA's for minor stuff.
My 735 SIS chipset board also uses VIA for some USB functions.

"smith" <none@none.com> wrote in message
news:XMPad.904$cm4.393@newsfe1-win.ntli.net...
> how can you have the via ones installed ?? our board is an SIS chipset not
> via ?
>
> if you have managed it i would like to know how tho of course, have
> installed SP2 now and it still will not work in USB 2 mode
>
>
>
>
Anonymous
a b V Motherboard
October 14, 2004 4:58:03 PM

Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)

Mine uses both too. It seems the main one is SIS 7001PCI to USB




On Tue, 12 Oct 2004 20:33:20 GMT, "Tod" <no_spam_me@comcast.net>
wrote:

>Your 755-A main chipset is SIS, but may use VIA's for minor stuff.
>My 735 SIS chipset board also uses VIA for some USB functions.
>
>"smith" <none@none.com> wrote in message
>news:XMPad.904$cm4.393@newsfe1-win.ntli.net...
>> how can you have the via ones installed ?? our board is an SIS chipset not
>> via ?
>>
>> if you have managed it i would like to know how tho of course, have
>> installed SP2 now and it still will not work in USB 2 mode
>>
>>
>>
>>
>
>
October 14, 2004 10:00:54 PM

Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)

> Mine uses both too. It seems the main one is SIS 7001PCI to USB

when i install it, all my USB things do not work :-(
!