Tom's Hardware Forums » Motherboards & Memory » Epox » 8rda+ Problem
 

8rda+ Problem

Add a reply



Word :   Username :  
 
Bottom
Author
 Thread : 8rda+ Problem
 
Anonymous
More Information
n°838082
01-22-2005 at 09:04:36 PM

Archived from groups: alt.comp.periphs.mainboard.epox (More info?)

 

hallo alle,
ich habe heute epox 8rda+ bekommen.Und entdecke ich dass die ps2 Tastatur
nicht annerkannt wird, wenn ich IDE-Device anschliesse. Nachdem ich die
IDE-Device (Festplatte und CD-Rom)rausgenommen habe, wird die Tastatur
wieder annerkannt.Woran kann das Problem liegehn?
bitte mail an nan@demag.rwth-aachen.de
danke

Related Product

Register or log in to remove.
DaveL
Profile: stranger
More Information
n°838083
01-22-2005 at 09:04:37 PM

Archived from groups: alt.comp.periphs.mainboard.epox (More info?)

 

Can you type it in english? My German is a little rusty. But I have a
feeling I'm going to advise you to use the MS IDE driver.

DaveL


"Li Nan" <nan.li@rwth-aachen.de> wrote in message
news:35f4rkF4l14lfU1@news.dfncis.de...
> hallo alle,
> ich habe heute epox 8rda+ bekommen.Und entdecke ich dass die ps2 Tastatur
> nicht annerkannt wird, wenn ich IDE-Device anschliesse. Nachdem ich die
> IDE-Device (Festplatte und CD-Rom)rausgenommen habe, wird die Tastatur
> wieder annerkannt.Woran kann das Problem liegehn?
> bitte mail an nan@demag.rwth-aachen.de
> danke
>
>

Anonymous
More Information
n°838085
01-23-2005 at 03:54:46 AM

Archived from groups: alt.comp.periphs.mainboard.epox (More info?)

 

of english.
ich have had epox 8RDA+ today. But it will not work. If the IDE-Device steck
on the Board. My PS2 keyborad will not be recognized. If i pluged the
IDE-Device from the board, it do work. And i have tried several PS2
keyborad. Nothing changed.
My Computer:
EPOX 8RDA+
Barton 2500+
350W
Maxtor 80G 7200rpm, 2M Cache.
2X256MB DDR 400 Memory from Infinion
LG CD Rom
etc.
could you help me?
nan@demag.rwth-aachen.de
"DaveL" <dave1027@comcast.net> ??????:c92dnTt7qrSmEW_cRVn-rA@comcast.com...
> Can you type it in english? My German is a little rusty. But I have a
> feeling I'm going to advise you to use the MS IDE driver.
>
> DaveL
>
>
> "Li Nan" <nan.li@rwth-aachen.de> wrote in message
> news:35f4rkF4l14lfU1@news.dfncis.de...
>> hallo alle,
>> ich habe heute epox 8rda+ bekommen.Und entdecke ich dass die ps2 Tastatur
>> nicht annerkannt wird, wenn ich IDE-Device anschliesse. Nachdem ich die
>> IDE-Device (Festplatte und CD-Rom)rausgenommen habe, wird die Tastatur
>> wieder annerkannt.Woran kann das Problem liegehn?
>> bitte mail an nan@demag.rwth-aachen.de
>> danke
>>
>>
>

DaveL
Profile: stranger
More Information
n°838086
01-23-2005 at 03:54:47 AM

Archived from groups: alt.comp.periphs.mainboard.epox (More info?)

 

Ok. I take it that when you attach some kind of IDE device to the system
then the keyboard quits working. My first guess is you have run out of IRQs
and something is refusing to share nicely. It would help if you explained
what this "IDE-Device" is. If this is a PCI expansion board then try
another PCI slot.

DaveL


"Li Nan" <nan.li@rwth-aachen.de> wrote in message
news:35fssoF4fkrmoU1@news.dfncis.de...
> of english.
> ich have had epox 8RDA+ today. But it will not work. If the IDE-Device
> steck on the Board. My PS2 keyborad will not be recognized. If i pluged
> the IDE-Device from the board, it do work. And i have tried several PS2
> keyborad. Nothing changed.
> My Computer:
> EPOX 8RDA+
> Barton 2500+
> 350W
> Maxtor 80G 7200rpm, 2M Cache.
> 2X256MB DDR 400 Memory from Infinion
> LG CD Rom
> etc.
> could you help me?
> nan@demag.rwth-aachen.de
> "DaveL" <dave1027@comcast.net>
> ??????:c92dnTt7qrSmEW_cRVn-rA@comcast.com...
>> Can you type it in english? My German is a little rusty. But I have a
>> feeling I'm going to advise you to use the MS IDE driver.
>>
>> DaveL
>>
>>
>> "Li Nan" <nan.li@rwth-aachen.de> wrote in message
>> news:35f4rkF4l14lfU1@news.dfncis.de...
>>> hallo alle,
>>> ich habe heute epox 8rda+ bekommen.Und entdecke ich dass die ps2
>>> Tastatur nicht annerkannt wird, wenn ich IDE-Device anschliesse. Nachdem
>>> ich die IDE-Device (Festplatte und CD-Rom)rausgenommen habe, wird die
>>> Tastatur wieder annerkannt.Woran kann das Problem liegehn?
>>> bitte mail an nan@demag.rwth-aachen.de
>>> danke
>>>
>>>
>>
>
>

Anonymous
More Information
n°838089
01-23-2005 at 07:10:38 AM

Archived from groups: alt.comp.periphs.mainboard.epox (More info?)

 

the so called ide-device ist a harddisk maxtor and a cd rom from LG. that's
all. I do not understand, what does pci expansion board. But it isn't the
same, i guess.
what should i do now?
"DaveL" <dave1027@comcast.net> ??????:KaednT4EgIjgXW_cRVn-rA@comcast.com...
> Ok. I take it that when you attach some kind of IDE device to the system
> then the keyboard quits working. My first guess is you have run out of
> IRQs and something is refusing to share nicely. It would help if you
> explained what this "IDE-Device" is. If this is a PCI expansion board
> then try another PCI slot.
>
> DaveL
>
>
> "Li Nan" <nan.li@rwth-aachen.de> wrote in message
> news:35fssoF4fkrmoU1@news.dfncis.de...
>> of english.
>> ich have had epox 8RDA+ today. But it will not work. If the IDE-Device
>> steck on the Board. My PS2 keyborad will not be recognized. If i pluged
>> the IDE-Device from the board, it do work. And i have tried several PS2
>> keyborad. Nothing changed.
>> My Computer:
>> EPOX 8RDA+
>> Barton 2500+
>> 350W
>> Maxtor 80G 7200rpm, 2M Cache.
>> 2X256MB DDR 400 Memory from Infinion
>> LG CD Rom
>> etc.
>> could you help me?
>> nan@demag.rwth-aachen.de
>> "DaveL" <dave1027@comcast.net>
>> ??????:c92dnTt7qrSmEW_cRVn-rA@comcast.com...
>>> Can you type it in english? My German is a little rusty. But I have a
>>> feeling I'm going to advise you to use the MS IDE driver.
>>>
>>> DaveL
>>>
>>>
>>> "Li Nan" <nan.li@rwth-aachen.de> wrote in message
>>> news:35f4rkF4l14lfU1@news.dfncis.de...
>>>> hallo alle,
>>>> ich habe heute epox 8rda+ bekommen.Und entdecke ich dass die ps2
>>>> Tastatur nicht annerkannt wird, wenn ich IDE-Device anschliesse.
>>>> Nachdem ich die IDE-Device (Festplatte und CD-Rom)rausgenommen habe,
>>>> wird die Tastatur wieder annerkannt.Woran kann das Problem liegehn?
>>>> bitte mail an nan@demag.rwth-aachen.de
>>>> danke
>>>>
>>>>
>>>
>>
>>
>

DaveL
Profile: stranger
More Information
n°838090
01-23-2005 at 07:10:39 AM

Archived from groups: alt.comp.periphs.mainboard.epox (More info?)

 

So you are saying that when you connect the hard disk to the IDE channel the
keyboard quits working? Try a different hard drive. Try clearing the cmos
and loading setup defaults.

DaveL


"Li Nan" <nan.li@rwth-aachen.de> wrote in message
news:35g8buF4mlalnU1@news.dfncis.de...
> the so called ide-device ist a harddisk maxtor and a cd rom from LG.
> that's all. I do not understand, what does pci expansion board. But it
> isn't the same, i guess.
> what should i do now?
> "DaveL" <dave1027@comcast.net>
> ??????:KaednT4EgIjgXW_cRVn-rA@comcast.com...
>> Ok. I take it that when you attach some kind of IDE device to the system
>> then the keyboard quits working. My first guess is you have run out of
>> IRQs and something is refusing to share nicely. It would help if you
>> explained what this "IDE-Device" is. If this is a PCI expansion board
>> then try another PCI slot.
>>
>> DaveL
>>
>>
>> "Li Nan" <nan.li@rwth-aachen.de> wrote in message
>> news:35fssoF4fkrmoU1@news.dfncis.de...
>>> of english.
>>> ich have had epox 8RDA+ today. But it will not work. If the IDE-Device
>>> steck on the Board. My PS2 keyborad will not be recognized. If i pluged
>>> the IDE-Device from the board, it do work. And i have tried several PS2
>>> keyborad. Nothing changed.
>>> My Computer:
>>> EPOX 8RDA+
>>> Barton 2500+
>>> 350W
>>> Maxtor 80G 7200rpm, 2M Cache.
>>> 2X256MB DDR 400 Memory from Infinion
>>> LG CD Rom
>>> etc.
>>> could you help me?
>>> nan@demag.rwth-aachen.de
>>> "DaveL" <dave1027@comcast.net>
>>> ??????:c92dnTt7qrSmEW_cRVn-rA@comcast.com...
>>>> Can you type it in english? My German is a little rusty. But I have a
>>>> feeling I'm going to advise you to use the MS IDE driver.
>>>>
>>>> DaveL
>>>>
>>>>
>>>> "Li Nan" <nan.li@rwth-aachen.de> wrote in message
>>>> news:35f4rkF4l14lfU1@news.dfncis.de...
>>>>> hallo alle,
>>>>> ich habe heute epox 8rda+ bekommen.Und entdecke ich dass die ps2
>>>>> Tastatur nicht annerkannt wird, wenn ich IDE-Device anschliesse.
>>>>> Nachdem ich die IDE-Device (Festplatte und CD-Rom)rausgenommen habe,
>>>>> wird die Tastatur wieder annerkannt.Woran kann das Problem liegehn?
>>>>> bitte mail an nan@demag.rwth-aachen.de
>>>>> danke
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>

Anonymous
More Information
n°838092
01-23-2005 at 06:00:22 PM

Archived from groups: alt.comp.periphs.mainboard.epox (More info?)

 

i had cleaned cmos, but it does not work. And i will try anathor harddisk
from IBM. I hope it will be work.
"DaveL" <dave1027@comcast.net> ??????:4ZmdnSpggPtiYW_cRVn-qA@comcast.com...
> So you are saying that when you connect the hard disk to the IDE channel
> the keyboard quits working? Try a different hard drive. Try clearing the
> cmos and loading setup defaults.
>
> DaveL
>
>
> "Li Nan" <nan.li@rwth-aachen.de> wrote in message
> news:35g8buF4mlalnU1@news.dfncis.de...
>> the so called ide-device ist a harddisk maxtor and a cd rom from LG.
>> that's all. I do not understand, what does pci expansion board. But it
>> isn't the same, i guess.
>> what should i do now?
>> "DaveL" <dave1027@comcast.net>
>> ??????:KaednT4EgIjgXW_cRVn-rA@comcast.com...
>>> Ok. I take it that when you attach some kind of IDE device to the
>>> system then the keyboard quits working. My first guess is you have run
>>> out of IRQs and something is refusing to share nicely. It would help if
>>> you explained what this "IDE-Device" is. If this is a PCI expansion
>>> board then try another PCI slot.
>>>
>>> DaveL
>>>
>>>
>>> "Li Nan" <nan.li@rwth-aachen.de> wrote in message
>>> news:35fssoF4fkrmoU1@news.dfncis.de...
>>>> of english.
>>>> ich have had epox 8RDA+ today. But it will not work. If the IDE-Device
>>>> steck on the Board. My PS2 keyborad will not be recognized. If i pluged
>>>> the IDE-Device from the board, it do work. And i have tried several PS2
>>>> keyborad. Nothing changed.
>>>> My Computer:
>>>> EPOX 8RDA+
>>>> Barton 2500+
>>>> 350W
>>>> Maxtor 80G 7200rpm, 2M Cache.
>>>> 2X256MB DDR 400 Memory from Infinion
>>>> LG CD Rom
>>>> etc.
>>>> could you help me?
>>>> nan@demag.rwth-aachen.de
>>>> "DaveL" <dave1027@comcast.net>
>>>> ??????:c92dnTt7qrSmEW_cRVn-rA@comcast.com...
>>>>> Can you type it in english? My German is a little rusty. But I have
>>>>> a feeling I'm going to advise you to use the MS IDE driver.
>>>>>
>>>>> DaveL
>>>>>
>>>>>
>>>>> "Li Nan" <nan.li@rwth-aachen.de> wrote in message
>>>>> news:35f4rkF4l14lfU1@news.dfncis.de...
>>>>>> hallo alle,
>>>>>> ich habe heute epox 8rda+ bekommen.Und entdecke ich dass die ps2
>>>>>> Tastatur nicht annerkannt wird, wenn ich IDE-Device anschliesse.
>>>>>> Nachdem ich die IDE-Device (Festplatte und CD-Rom)rausgenommen habe,
>>>>>> wird die Tastatur wieder annerkannt.Woran kann das Problem liegehn?
>>>>>> bitte mail an nan@demag.rwth-aachen.de
>>>>>> danke
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>
>


  Tom's Hardware Forums » Motherboards & Memory » Epox » 8rda+ Problem

Go to:
Add a reply
 

Forum map
MyDiscussions.Net Forum, Version 2007.1
© 2000-2006 No1Dev
Page generated in 0.175 seconds
Google Ads
Ad
Related Topics
See all relatives topics
News

ATI Catalyst drivers have a problem

Published on August 27, 2004

ATI has a problem in the latest Catalyst drivers. Read more

Nvidia Contract Makers In Taiwan Low-key Over Defective Chip Reports

Published on July 07, 2008

Nvidia's Taiwan-based graphics chip contract makers are being low-key after the US chip designer informed investors on July 3 that will take a charge of US$150-$200 million related to expenses stemming from issues discovered with die/packaging materials used in previous generation notebook products. Read more

XP Service Pack 3 Kills AMD Machines

Published on May 09, 2008

Windows XP Service Pack 3 finally arrived to our computers this week… And is now killing AMD machines, according to Jesper Johansson, former program manager for security policy at Microsoft. Read more

CES 2007: CarMD finds the problem, then tells you what parts and labor should cost

Published on January 09, 2007

Two crappy things in this world: (1) Your car breaking down and you not knowing why; and (2) going to get it fixed and being charged an arm, a leg and some other essential regions in order to get it fixed. Read more

Latest Reviews & Articles
Stalker: Clear Sky--Is Your System Ready?

Stalker: Clear Sky--Is Your System Ready?

Published on September 30, 2008

Thinking about picking up the latest update to Stalker, but not sure if your graphics subsystem can handle it? Hang on as we take you through a performance tour and demonstrate how the game has been prettied up. Read more

Part 4: Avivo HD vs. PureVideo HD

Part 4: Avivo HD vs. PureVideo HD

Published on September 29, 2008

The 780G chipset/Radeon HD 3200 and the MCP78S chipset/GeForce 8200 provide the first integrated graphics solutions that can accelerate Blu-ray playback. We dig deep into how well they work with high-quality Blu-ray 1080p video playback. Read more

Four GeForce 9600 GT Cards Compared

Four GeForce 9600 GT Cards Compared

Published on September 26, 2008

Manufacturers really love the first Geforce 9. The graphic chip is fast, the cards are inexpensive, and some retailers offer more than ten variations. Read more

Maxtor's Shared Storage Does NAS At Home

Maxtor's Shared Storage Does NAS At Home

Published on September 25, 2008

What do you do with all the data you collect at home? Network attached storage is the solution. We test Maxtor's Shared Storage II and find that it is also suitable for use in small businesses. Read more

All the Reviews & Articles