7N400 pro2 RAID problems

[Guest]

Archived from groups: alt.comp.periphs.mainboard.giga-byte (More info?)

"Error!! Firmware is not ready"

The GigaRAID startup will not find the two drives attached to the controller
and returns this message. They have already been used previously as a RAID
disk. Does someone know what this message means?

Peter

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.giga-byte (More info?)

Peter Chabot schrieb:

> "Error!! Firmware is not ready"
>
> The GigaRAID startup will not find the two drives attached to the
> controller
> and returns this message. They have already been used previously as a
> RAID
> disk. Does someone know what this message means?

Same here. New 7N400 Pro2 rev2.0 with shipped FH BIOS didn't have this
problem. Updated BIOS Version FI and now this message appears when setting
GigaRAID Devices to RAID in BIOS. When setting to ATA (single drives, no
RAID), all attached devices are recognized correctly.

Booted old BIOS FH and now there is the same .... "Firmware not ready" when
selecting RAID as mode fpr IDE3/4 in BIOS.

Marcel.

--
Unix ist echt Scheisse, einmal eingerichtet laeuft es einfach.
Wie soll man da Erfahrung sammeln -- sfr in #debian.de

Reply-To ist funktionstüchtig.