K8NSNXP-939 wont boot in dual channel

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

I have just set up a K8NSNXP-939 with 2 512mb corsair ddr400 memory sticks.
If I put the memory in slots 1 & 2 or slots 3 & 4, the PC wont boot, just
gives regular long beeps during the post. If I put the memory in slots q nd
3, it boots up fine, but says memory not optimised because its not running
in dual channel mode.

Any ideas gratefully received.

Peter

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

Thanks - upgraded the bios to F6 as you seggested and the board now boots in
dual channel.


"40 PC SOCKET SET" <nospam@nospam.com> wrote in message
news:41b9db61$0$19158$cc9e4d1f@news-text.dial.pipex.com...
> Known problem. Flash upgrade the BIOS to F6
>
> "Peter Seymour" <seymour@optushome.com.au> wrote in message
> news:41b9a7cf$0$6542$afc38c87@news.optusnet.com.au...
>>I have just set up a K8NSNXP-939 with 2 512mb corsair ddr400 memory
>>sticks. If I put the memory in slots 1 & 2 or slots 3 & 4, the PC wont
>>boot, just gives regular long beeps during the post. If I put the memory
>>in slots q nd 3, it boots up fine, but says memory not optimised because
>>its not running in dual channel mode.
>>
>> Any ideas gratefully received.
>>
>> Peter
>>
>
>