new build GA-8IG1000MK 865G RT

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

hello,

This is the first time that I build a Gigabyte board after having
recently built premium (intel) Abit and Aopen boards.

I needed the micro-atx form factor and support for intel processor.

The system is
mb: GIGABYTE GA-8IG1000MK 865G RT
psu: Enermax EG495AX-VE(W) SFMA ATX v.2.0(24p)
cpu: Intel P4C 3.0 Ghz (northwood)
RAM: 1GB, Kingston Value (PC3200)
AGP Video: Matrox Millenium g550
NIC: EG1032 v2 (Gb) (disabled on-board LAN)
Drives: 2 optical(CD, DVD-RW), 2 IDE HD's, 1 floppy
Fan: Zalman CNPS-7000B-AlCu

Temps: CPU idle 32C, Hard drives 32C or less at idle

OS: Win2ksp4, SuSE 9.2, Grub Boot loader

Here's the few outstanding problems remaining:
o CPU fan header is not working with Speedfan. No matter what, it always
shows the same speed. No fan control is possible via software. Do all GA
boards have this problem? Is QFan supported anywhere in the GA line?

o Sandra04 shows 5V -> 4.33V and 12V -> 11.98V
Is this the fault of the Enermax PSU or the GA PWM?
The Bios says this is OK.

o The AGP slot did not give a firm fit to my Matrox card. Though
it works fine, during shutdown I'm getting color artifacts and streaks
as it starts to close. There is a little play or wiggle in the VGA/DVI
connectors. I may try
and hot glue the card's plate to the case at the back.

While the above things stand out to me, I'm pleased with this board over
all.
The ease with which SuSE installed is a huge plus.

thanks for your guidance,
tlviewer

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

"tlviewer" <tlviewerSHRUB@yahooCHENEY.com> wrote in message
news:HBy6e.4193$DV.3001@twister.socal.rr.com...
> hello,
>
> This is the first time that I build a Gigabyte board after having
> recently built premium (intel) Abit and Aopen boards.
>
> I needed the micro-atx form factor and support for intel processor.
>
> The system is
> mb: GIGABYTE GA-8IG1000MK 865G RT
> psu: Enermax EG495AX-VE(W) SFMA ATX v.2.0(24p)
> cpu: Intel P4C 3.0 Ghz (northwood)
> RAM: 1GB, Kingston Value (PC3200)
> AGP Video: Matrox Millenium g550
> NIC: EG1032 v2 (Gb) (disabled on-board LAN)
> Drives: 2 optical(CD, DVD-RW), 2 IDE HD's, 1 floppy
> Fan: Zalman CNPS-7000B-AlCu
>
> Temps: CPU idle 32C, Hard drives 32C or less at idle
>
> OS: Win2ksp4, SuSE 9.2, Grub Boot loader
>
> Here's the few outstanding problems remaining:

P.S.

o there are no LED status lights lit on the board until the
case switch is applied. This can't be right. Please tell me that
I made a mistake in the wiring. Normally when the PSU powers
the board there is at least one status LED lit.

> o CPU fan header is not working with Speedfan. No matter what, it
always
> shows the same speed. No fan control is possible via software. Do all
GA
> boards have this problem? Is QFan supported anywhere in the GA line?
>
> o Sandra04 shows 5V -> 4.33V and 12V -> 11.98V
> Is this the fault of the Enermax PSU or the GA PWM?
> The Bios says this is OK.
>
> o The AGP slot did not give a firm fit to my Matrox card. Though
> it works fine, during shutdown I'm getting color artifacts and streaks
> as it starts to close. There is a little play or wiggle in the VGA/DVI
> connectors. I may try
> and hot glue the card's plate to the case at the back.
>
> While the above things stand out to me, I'm pleased with this board over
> all.
> The ease with which SuSE installed is a huge plus.
>
> thanks for your guidance,
> tlviewer
>
>