Just a note on 8knxp (rev 1.1)
Last response: in Motherboards
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)
O.S: WinXp pro sp2, full upgraded
raid 0 on ide3 with 2 hd maxtor
on ide 1 primary master: dvd burner Pioneer
on ide 1 primary slave : dvd burner LG
i bought a sata hd and plugged on sata port 1 (not on hot plug port)
after this plug the Pioneer start work in PIO mode.
After many and many retry, tweak and more, i switched the sata hd on hot
plug port.
Reboot, and got Ultra DMA on all channel
However i am fully soddisfacted owner of 8knxp
Andres Zanzani
Cesena, Italy
O.S: WinXp pro sp2, full upgraded
raid 0 on ide3 with 2 hd maxtor
on ide 1 primary master: dvd burner Pioneer
on ide 1 primary slave : dvd burner LG
i bought a sata hd and plugged on sata port 1 (not on hot plug port)
after this plug the Pioneer start work in PIO mode.
After many and many retry, tweak and more, i switched the sata hd on hot
plug port.
Reboot, and got Ultra DMA on all channel
However i am fully soddisfacted owner of 8knxp
Andres Zanzani
Cesena, Italy
More about : note 8knxp rev
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)
"Andres Zanzani" <zanzani@64k.it> wrote in message
news![:D]( ":D")
7f60d$qtu$1@fata.cs.interbusiness.it...
> O.S: WinXp pro sp2, full upgraded
>
> raid 0 on ide3 with 2 hd maxtor
> on ide 1 primary master: dvd burner Pioneer
> on ide 1 primary slave : dvd burner LG
>
> i bought a sata hd and plugged on sata port 1 (not on hot plug port)
>
> after this plug the Pioneer start work in PIO mode.
> After many and many retry, tweak and more, i switched the sata hd on hot
> plug port.
>
> Reboot, and got Ultra DMA on all channel
>
> However i am fully soddisfacted owner of 8knxp
>
> Andres Zanzani
> Cesena, Italy
>
>
Good input, Thank you!
jps
"Andres Zanzani" <zanzani@64k.it> wrote in message
news
7f60d$qtu$1@fata.cs.interbusiness.it...> O.S: WinXp pro sp2, full upgraded
>
> raid 0 on ide3 with 2 hd maxtor
> on ide 1 primary master: dvd burner Pioneer
> on ide 1 primary slave : dvd burner LG
>
> i bought a sata hd and plugged on sata port 1 (not on hot plug port)
>
> after this plug the Pioneer start work in PIO mode.
> After many and many retry, tweak and more, i switched the sata hd on hot
> plug port.
>
> Reboot, and got Ultra DMA on all channel
>
> However i am fully soddisfacted owner of 8knxp
>
> Andres Zanzani
> Cesena, Italy
>
>
Good input, Thank you!
jps
Related ressources:
- Forum8KNXP rev . 2.0
- ForumSATA setup on 8KNXP rev . 2.0
- Forum8KNXP memory upgrade?
- Forum8KNXP has no USB 2.0
- Forum8KNXP rev :1 RMAed
- Forum8KNXP rev 1 beta bios
- ForumGA-8KNXP rev 2.0 and SATA new system build problem
- ForumAny 8KNXP BIOS updates?
- ForumRaid 1 and 8KNXP install
- Forum8KNXP (std. and ultra) stories
- Forum8KNXP Rev 2 PAT Function
- Forumanyone use ocz 3700 gold rev 2 with a 8KNXP rev 1.0?
- Forum8KNXP ( Rev 1) with RAID 0 & 1: DISK BOOT FAILURE
- ForumDisappering AC97 with BIOS F10 on 8KNXP rev 1.0
- ForumPrecott in 8KNXP ( rev 1.0)
- Forum8KNXP Rev .2.0 Northbridge Fan Problem
- Forum8KNXP rev 1 and rev 2
- ForumPC hangs at BIOS screen after updating graphics driver.
- ForumDead 8KNXP - due to the front panel USB static problem
- Forum8KNXP Performance v. installed memory
- More resources
Read discussions in other Motherboards categories
!
