Archived from groups: alt.comp.periphs.mainboard.gigabyte (
More info?)
I do it from a boot disk, I've never had good luck with Windows flashing
programs.
"Nikonja" <nikonja@gmail.com> wrote in message
news:1berabvbjxpwz.15up82it2geu.dlg@40tude.net...
> On Fri, 15 Jul 2005 06:56:40 GMT, Cypher wrote:
>
>> On a side note, the boot time with the F6bios I find to be quite a bit
>> faster as well.
>>
>> "Nikonja" <nikonja@gmail.com> wrote in message
>> news:1fkjjozd889eu.18napkatyr7bn.dlg@40tude.net...
>>> On Tue, 12 Jul 2005 15:40:41 +0200, John wrote:
>>>
>>>> On Tue, 12 Jul 2005 14:26:01 +0200, Nikonja <nikonja@gmail.com> wrote:
>>>>
>>>>>Well i can't fsb goes only to 205 on 210 windows won't start, do i
>>>>>have
>>>>>to put htt on 3 and lower multiplier, because in windows i can do
>>>>>whatever
>>>>>i want from easytune 5 ! I have f4 bios ! cpu is a64 3500 winchester
>>>>
>>>> It could be that memory should be run asynchroneously.
>>>>
>>>> Try this:
>>>> - cpu voltage 1.5 or 1.55
>>>> - ram at 2.6 or 2.7 volt
>>>> - Ctrl F1 from main menu page in bios brings Advanced chipset menu
>>>> point up. In there set memory fsb to 166, agp to 67, cpu fsb to 240
>>>> and HTT to 4x.
>>>>
>>>> That will make memory run 166 x (240/200) = 200, and cpu is OC by 20%.
>>>>
>>>> You can download clockgen for your motherboard
>>>>
>>>> www.clockgen.com
>>>>
>>>> A trick is to set in bios before clockgen agp at 67, cpu fsb to 201,
>>>> mem fsb to 166. That will lock agp and pci.
>>>>
>>>> Then there is also a point with sata. Nvidia sata is not locked to
>>>> agp/pci.
>>>>
>>>> Clocgen is a windows app. Much less childish than easytune.
>>>>
>>>> best regards
>>>>
>>>> John
>>>
>>> Thank's i'll try !
>
> Did you flash your bios wrom windows with that gigabyte software @bios or
> from boot disk ?