Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)
Hi all, I have just upgraded the motherboard in my PC and now I have a
problem. The system works fine apart from the fact that whenever I plug a
Sony digital camera (I haven't tried any other brands as I dont have access
to any, but I have tried 3 different model Sony camera) into any of the USB
ports, the computer will hardware reset.
I have tried messing with the bios settings but no luck. Any ideas?
The specs are as follows:
P4 2.66@533
Gigabyte 8IPE1000 rev 2
2x 512 Kingston 400mhz ram in dual channel
ATI Radeon 9650 128meg
480W power supply
Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)
"JK" <johnknuhtsenSP@Mmail.dk> wrote in message
news:h1ioj1t6vpsh0pu3phddtbe493rgh13cfq@4ax.com...
> On Wed, 28 Sep 2005 09:12:17 +1000, "Dre" <blah@somewhere.com> wrote:
>
>
> >
> >Hi, thanks very much for the info, I'm currently downloading that file.
Did
> >it fix your problems??
> >
> >Its funny cause I upgraded my other PC here with the same board (8IPE1000
> >Pro 2) and it doesn't experience this problem. The problem computer is
now
> >200k's away so I'll hopefully get a chance to take another look at it
this
> >w/e, I was going to try the drivers from the Pro 2 and see how it goes,
but
> >I'll try these ones first..
> >
>
> Hi
>
> No, I did not fix my problem.
>
> It seems for my board to be bad hardware (it is a board bought as
> demo-ware). Some of the 4 ports on the backside could work now and
> then with a usb 2.0 device. It is fluctuating. And none of the four
> in- front ports can work with usb 2.0.
>
> For test I used a Hama card-reader with a 512 compact flash module in
> it.
>
> best regards
>
> John
So sorry to ask a stupid question, but what was the point of downloading
that file then, if it didn't fix your problem?!?!?!
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.