Archived from groups: alt.comp.periphs.mainboard.msi-microstar,alt.comp.hardware (More info?)
MSI KT7 Turbo mainboard, new Enermax EG365P-VE FCA PSU.
The Enermax has a 3-pin fan monitor connector, which the Enermax manual
says connect to the "Power Fan connector" on the MB. The MSI does have the
S_FAN1 "[system] Fan Power Connector" as the likely candidate.
Archived from groups: alt.comp.periphs.mainboard.msi-microstar,alt.comp.hardware (More info?)
In article <435bj0pkjj3peg6cgqfl79mvcsqa8nj0id@4ax.com>, fred@nospam.com
says...
>
> MSI KT7 Turbo mainboard, new Enermax EG365P-VE FCA PSU.
>
> The Enermax has a 3-pin fan monitor connector, which the Enermax manual
> says connect to the "Power Fan connector" on the MB. The MSI does have the
> S_FAN1 "[system] Fan Power Connector" as the likely candidate.
>
Uh, ok.
None of it matters anyway. You just have to remember what you plugged in
where.
Archived from groups: alt.comp.periphs.mainboard.msi-microstar,alt.comp.hardware (More info?)
On Wed, 01 Sep 2004 16:20:48 +0700, Fred <fred@nospam.com> wrote:
>
>MSI KT7 Turbo mainboard, new Enermax EG365P-VE FCA PSU.
>
>The Enermax has a 3-pin fan monitor connector, which the Enermax manual
>says connect to the "Power Fan connector" on the MB. The MSI does have the
>S_FAN1 "[system] Fan Power Connector" as the likely candidate.
I'm sorry, you didn't state the answer in the form of a question.
If you want RPM monitoring, any fan header (since any remotely
modern board has RPM-monitoring on all 3-pin fan headers) will
suffice, but it is not necessary to plug that into anything at
all, IIRC.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.