Archived from groups: microsoft.public.pocketpc (
More info?)
Tried that and still not having any luck.
"Mauricio Freitas [MVP]" <dr.emailposter@nowhere.invalid> wrote in message
news:uMumycpmEHA.2772@tk2msftngp13.phx.gbl...
> Most guides (including our on Geekzone) work on ICS solutions. These will
> not allow access to shared folders. You want to use the PAN profile,
> available with Widcomm drivers from 1.3 and up. You do this by select
"Allow
> Private Network" instead of "Share Internet Access" in the Bluetooth
Network
> Access configuration. In this case you have to manually configure your
> Pocket PC to access the network, including IP address, DNS, etc.
>
>
> --
> Mauricio Freitas, Microsoft MVP Mobile Devices
> Bluetooth guides:
http://www.geekzone.co.nz/content.asp?contentid=449
> Geekzone Software Store:
http://www.geekzone.co.nz/store
> Our RSS feeds give you up to date information on new software as soon as
> they're available:
http://www.geekzone.co.nz/content.asp?contentid=3344
>
>
>
> "Tom" <t_j_smith@hotmail.com> wrote in message
> news:0oH1d.6851$yW6.2620@clgrps12...
> >I am trying to sort out the exact same problem. I have not tried this
yet,
> > but just located a possible solution on internet:
> >
> >
http://home.comcast.net/~spam-target/1327.html
> >
> > I will likely be trying to go through this later today, but would still
be
> > interested in any other input or any successes or problems that anyone
has
> > had following these instructions. I will let you know how I make out
> > later.
> >
> > "Jesper Kristensen" <jbk@NOSPAMsnaps.dk> wrote in message
> > news:40f5b2e3$0$23878$14726298@news.sunsite.dk...
> >> BTW, I'm using Windows 2000.
> >>
> >> /Jesper
> >>
> >> "Jesper Kristensen" <jbk@NOSPAMsnaps.dk> wrote in message
> >> news:40f5ad56$0$23867$14726298@news.sunsite.dk...
> >> > Hi,
> >> >
> >> > I can access the Internet from my IPAQ through the Bluetooth
> >> > connection,
> >> but
> >> > I cannot access the PC's shared folders from File Explorer. I just
get
> >> > a
> >> > "Network path was not found" error message. ActiveSync doesn't work
> >> > over
> >> > Bluetooth either - only when in the cradle.
> >> >
> >> > What am I doing wrong? Do I need any special IP settings on the IPAQ?
I
> >> have
> >> > just set it to "server-assigned" at the moment, is that correct?
> >> >
> >> > /Jesper
> >> >
> >> > --
> >> > Remove NOSPAM from e-mail address
> >> >
> >> >
> >>
> >>
> >
> >
>
>