Neo4 Diamond and Athlon 64 Venice

Archived from groups: alt.comp.periphs.mainboard.msi-microstar (More info?)

Harald skrev:
> Hi,
>
> Just ordered the above combo and I hope they will work OK with the shipping
> BIOS, V. 1.1 (I think).
> Anybody tried this, and will I be better off getting a Winchester instead of
> the Venice?
> As to RAM I know that bthe Winchester has problems running at 400Mhz with 4
> Doublesided modules. I was hoping the Venice has solved this, but I cannot
> find any info on it anywhere.
> The reason I want to run 4*512 MB modules instead of 2*1024 MB is that
> 1024MB modules are only avalable in CL3, but I can get 500Mhz CL2.5 512
> modules making the setup a lot easier to overclock.
> I plan to get 4 200MB Samsung SATA II drives in 2 RAID0 setups. The graphics
> card will be a 600XT or some 6600 variety.
>
> Any thoughts ad suggestios on the setup will be greatly appreciated.
>
> Thanks in advance!!
>
>
hi

saw a report about venice have a partly fixed memory controller. it will run 4x 512 @ ddr400
specs but with commandrate 2t. (better than before, ddr333)

coco

Archived from groups: alt.comp.periphs.mainboard.msi-microstar (More info?)

So I am better off getting 2*1024MB CL3 modules at 1T command rate instead
of 4*512MB CL2 modules at 2T command rate.

"maniac" <maniac@SPAMISBAD.tweak.pl> wrote in message
news:AYkae.15750$0z2.11924@news.chello.at...
> CoCo <cocotmREMOVEremove@telia.com> typed:
>
>> saw a report about venice have a partly fixed memory controller. it
>> will run 4x 512 @ ddr400 specs but with commandrate 2t. (better than
>> before, ddr333)
>
> Venice will not run 4 x 512 MB modules with 1T timing.
>
>> coco
>
> --
> maniac / maniac(at)tweak.pl
> AMD 64 Bit Performance User
> Hardware: http://www.m4ni4c.tk/
> News/Forum: http://www.tweak.pl/
>