AK38n Won't boot... no beeps

Archived from groups: alt.comp.periphs.mainboard.shuttle (More info?)

Are you sure you wired it up correctly?
When I first tried booting mine, I got nothing.
I had not put the wires up correctly to it. I think the motherboard needed
another connection that I did not know about.
So check ALL the power leads to the MB.
later,
dave
(One out of many daves)

"Tyler Penn" <tyler.penn@gmail.com> wrote in message
news:loednaN8OO1gUmvcRVn_vg@giganews.com...
> I've put together a computer out of some old parts I had... Here's the
> setup
>
> Shuttle Ak38n motherboard
> two sticks of DDR RAM
> AMD Athlon XP 2400
> ATI Radeon 9250SE Video Card
> Western Digital 30GB HD
> CD-Rom Drive
> 300W Power Supply
>
> So I put it all together turned it on and nothing. No beep, and the hard
> drive does not spin up. I even try to eject the CD drive tray and
> nothing.
> It seems as if the HD and CD Drive are getting no power. I swapped the
> power connectors and the mobo still gets power and the drives still do
> nothing.
> Also, I tried taking the RAM out to try to get any response and still no
> beeps.
> I know the processor is still good because I put it back into my current
> PC
> and it works fine... Any ideas!? I'm thinking it's a bad motherboard or
> power supply.
> Thanks in advance!
>
> -Tyler Penn
>
>
>