AMD 3200

[Guest]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

Does anyone know 'what' the normal temp range is for the AMD 3200 in the
KT600 PLAT. in C please. I am experiencing 44 c - 52 C underneath
the cpu and approximately 4 C cooler wherever the BIOS monitors it.

Thank you !

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

KRSMITH wrote:
> Does anyone know 'what' the normal temp range is for the AMD 3200 in the
> KT600 PLAT. in C please. I am experiencing 44 c - 52 C underneath
> the cpu and approximately 4 C cooler wherever the BIOS monitors it.
>
> Thank you !
>
That sounds reasonable. Some people like to cool it even more, with big
heatsinks and fans with greater CFM.

You might find this page on the AMD site interesting.

http://139.95.253.213/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=98,E=0000000000169443260,K=9340,Sxi=16,Case=obj(1224)

It gives the specs for many AMD processors.

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

stanmc wrote:
---snip---
> You might find this page on the AMD site interesting.
>
> http://139.95.253.213/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=98,E=0000000000169443260,K=9340,Sxi=16,Case=obj(1224)
>
>
> It gives the specs for many AMD processors.

The final parentheses is required.

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

Thank You Very Much.....

Do you or anyone else know why 3 DDR 3200 (400) will not work on the
KT600 Platium M/B. I found an article on the KSU8 ? M/B and it says
ONLY 2 Dimms rated at 400 MHZ will work. I wonder if that is why it
doesn't work in my KT600 Plat M/B ???

Thanks

stanmc wrote:
> stanmc wrote:
> ---snip---
>
>> You might find this page on the AMD site interesting.
>>
>> http://139.95.253.213/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=98,E=0000000000169443260,K=9340,Sxi=16,Case=obj(1224)
>>
>>
>> It gives the specs for many AMD processors.
>
>
> The final parentheses is required.

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

KRSMITH <krspackers@charter.net> wrote in message news:<10gqifisvd73j26@corp.supernews.com>...
> Thank You Very Much.....
>
> Do you or anyone else know why 3 DDR 3200 (400) will not work on the
> KT600 Platium M/B. I found an article on the KSU8 ? M/B and it says
> ONLY 2 Dimms rated at 400 MHZ will work. I wonder if that is why it
> doesn't work in my KT600 Plat M/B ???
>
> Thanks


It's a VIA chipset limitation, not a problem with the motherboards.

Andy