problem with SY-5EHM V1.0

Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

Hi everybody!

I have a SYS-5EHM V1.0, and I have the following problem:

During startup, the following message appears:

"Updating ESCD.........
Building DMI Pool.................
Verifying DMI Pool Data ..............."

AND LOOK IN THIS PART!!!!

Please HELP ME!!!

My cuestions are:

1.- That signifies ESCD?

2.- That signifies DMI?

3.- As I can correct this error?

Please, if they have answers to this problem, cause know al mail:
jmcantov@yahoo.com.mx

Beforehand thanks.
1 answer Last reply
More about problem 5ehm
  1. Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

    jmcanto wrote:
    > Hi everybody!
    >
    > I have a SYS-5EHM V1.0, and I have the following problem:
    >
    > During startup, the following message appears:
    >
    > "Updating ESCD.........
    > Building DMI Pool.................
    > Verifying DMI Pool Data ..............."
    >
    > AND LOOK IN THIS PART!!!!

    ????

    >
    > Please HELP ME!!!
    >
    > My questions are:
    >
    > 1.- What [que] signifies ESCD?
    >
    > 2.- What signifies DMI?
    >
    > 3.- As I can correct this error?


    What error?

    >
    > Please, if they have answers to this problem, cause know al mail:
    > jmcantov@yahoo.com.mx
    >
    > Beforehand thanks.
    >

    According to http://www.pcwebopedia.com/,

    ESCD = Extended System Configuration Data

    DMI = Desktop Management Interface

    JAWAG, but if you switched any PCI cards around, you may need to go
    into BIOS setup and enable "Reset System Configution Data". Enabling
    this option causes
    setup to scan the PCI slots on your mainboard during bootup, after which
    it will automatically
    reset itself to "off".
    --
Ask a new question

Read More

DMI Soyo Motherboards