Archived from groups: alt.comp.periphs.mainboard.soyo (More info?)

During some troubleshooting I disconnected the wires from the
motherboard to the front USB ports. This fixed the problem on the rear
USB ports and I would like to plug the front back in to the proper pins
(I supect they were plugged in incorrectly from the factory).

The wires are each on an individual connector and are labeled as USB1+,
USB1-, VCC 1, GND 1, USB 2+, USB2-, VCC 2, and GND 2. The mobo manual
describes the motherboard connection as
pin 1 VERG_FP_USBPWR0
pin 2 VERG_FP_USBPWR0
pin 3 USB_FP_P0-
pin 4 USB_FB_P1-
pin 5 USB_FP_P0+
pin 6 USB_FP_P1+
pin 7 GND
pin 8 GND
pin 9 KEY
pin 10 USB_FP_OC0

I suspect the plug in would be
pin 1 VERG_FP_USBPWR0 VCC1
pin 2 VERG_FP_USBPWR0 VCC2
pin 3 USB_FP_P0- USB1-
pin 4 USB_FB_P1- USB2-
pin 5 USB_FP_P0+ USB1+
pin 6 USB_FP_P1+ USB2+
pin 7 GND GND1
pin 8 GND GND2
pin 9 KEY empty
pin 10 USB_FP_OC0 empty

Does anyone know if this would be the proper connection?
TIA,

John