Tiger S1832DL & Pentium III 1.0 ghz 1ghz Slot 1 CPU

[christopher]

Archived from groups: alt.comp.periphs.mainboard.tyan (More info?)

Does anyone know if the Tiger S1832DL can run a Pentium III 1.0ghz slot CPU?

Thanks
Christopher

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.tyan (More info?)

no , please refer to
http://www.tyan.com/support/html/cpu_pentium_ii_iii_celeron.html

then find the S1832
Pit

Christopher schrieb in Nachricht <10hjhh4cef814b9@corp.supernews.com>...
>Does anyone know if the Tiger S1832DL can run a Pentium III 1.0ghz slot
CPU?
>
>Thanks
>Christopher
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.tyan (More info?)

No, the max is 850 IF you have a rev. F board.

Lee

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.tyan (More info?)

"Christopher" wrote:
> Does anyone know if the Tiger S1832DL can run a Pentium III 1.0ghz slot
CPU?
>
I don't know about the 1832 or how similar it is to the S1830S, but they are
both from the same era.

The S1830S is also listed as having a maximum speed of 850 (which is what I
run). However, others in this newsgroup used to say (back when the 1830 was
more current) that it could run a PIII/1000 CPU provided that it was the
1000/100 rather than the 1000/133. And, depending on the Bios version, the
CPU speed might show as Unknown rather than 1000; however, other speed-test
programs would correctly report the speed as 1000.

For a while, I used to search for that CPU on eBay using the following:
(p3*,piii*,penti*) (1000*,1g*) -133* -p4 -moth* -dual -370 -xeon

You still have to read each one to make sure that it's a 1000/100 (code
SL4KL) rather than the 1000/133 (code SL4BS).

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.tyan (More info?)

Certain revisions of the S1832DL will accept 1GHz PIII's. I have one
with a pair of them running right now. I can check the rev on the board
if you like.

On Wed, 11 Aug 2004 03:09:13 -0400, "Christopher"
<BlueFromTheSun@JoiMail.com> wrote:

>Does anyone know if the Tiger S1832DL can run a Pentium III 1.0ghz slot CPU?
>
>Thanks
>Christopher
>

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.tyan (More info?)

Please do, I have a rev F, running PIII 800's.



>Subject: Re: Tiger S1832DL & Pentium III 1.0 ghz 1ghz Slot 1 CPU
>From: Jamal Taylor madman1@pipeline.com
>Date: 11/25/2004 2:00 AM Eastern Standard Time
>Message-id: <om0bq09rocparv2hf21he3u1fuf4shv22n@4ax.com>
>
>Certain revisions of the S1832DL will accept 1GHz PIII's. I have one
>with a pair of them running right now. I can check the rev on the board
>if you like.
>
>On Wed, 11 Aug 2004 03:09:13 -0400, "Christopher"
><BlueFromTheSun@JoiMail.com> wrote:
>
>>Does anyone know if the Tiger S1832DL can run a Pentium III 1.0ghz slot CPU?
>>
>>Thanks
>>Christopher
>>
>
>
>
>
>
>
>
>