My OC Results

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

Ive got a Asus A7N8X-E deluxe mobo
athlon xp 2600+
512mb kinsgton ddr333 ram
radeon 9800 pro
audigy 2 zs

etc
etc

on stock settings ( 166fsb / 166 ddr 11.5 multiplier = 1.92ghz ). 3d
mark 2001se results in about 14500.

the highest i could get it to run stabily at is 189fsb / 189 ddr 11.5
multiplier = 2.19ghz ), 3d mark gets about 16445.

Seems stable enough, ran both 3dmarks and had a go of UT2004 with no
problems. CPU temp is 63 degrees c after ut2004

Im scared of killing my mem or cpu though so i have reset everything
to stock speeds, just tried out of curiosity really.

How far off is my results from what i would get with a 3200+ and ddr
400 ram?

thanz

paul

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

16681 3D marks
Idle 53C
Load 62C

AMD Athlon 3200+ @ 2200MHz (200x11)
1024 PC3200 DDR-RAM
ATI Radeon 9800 Pro

 

[JustMe]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

what version of 3d mark are you using? surely not 3dmark03

"Pace" <pace123@REMOVETHIShotmail.com> wrote in message
news:c4i00s$56n$1@sparta.btinternet.com...
> 16681 3D marks
> Idle 53C
> Load 62C
>
> AMD Athlon 3200+ @ 2200MHz (200x11)
> 1024 PC3200 DDR-RAM
> ATI Radeon 9800 Pro
>
>

 

[QBall]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

"pberry" <pwrberry@yahoo.co.uk> wrote in message
news:58uo60duf0mh5mgfctqle7b4jv3h64m8ub@4ax.com...
> Ive got a Asus A7N8X-E deluxe mobo
> athlon xp 2600+
> 512mb kinsgton ddr333 ram
> radeon 9800 pro
> audigy 2 zs
>
> etc
> etc
>
> on stock settings ( 166fsb / 166 ddr 11.5 multiplier = 1.92ghz ). 3d
> mark 2001se results in about 14500.
>
> the highest i could get it to run stabily at is 189fsb / 189 ddr 11.5
> multiplier = 2.19ghz ), 3d mark gets about 16445.


Don't worry, I've got a mobile Barton 2.4 on a DFI Infinity ... and the
highest I could get it to run stably is 245 x 10.5 = 2.57 GHz


>
> Seems stable enough, ran both 3dmarks and had a go of UT2004 with no
> problems. CPU temp is 63 degrees c after ut2004
>
> Im scared of killing my mem or cpu though so i have reset everything
> to stock speeds, just tried out of curiosity really.
>
> How far off is my results from what i would get with a 3200+ and ddr
> 400 ram?
>
> thanz
>
> paul

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

no im using 3dmark 01se. on the 03 version i get 5545.

paul

 

[JustMe]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

gads, I'm only getting 3270 with 03. and 10417 with 01I have a Barton 2500
at 3200 and 1gb PC2100 ram and a 9600 Pro Video card.

though my temps are a lot lower 40c idle and 50 full load


"pberry" <pwrberry@yahoo.co.uk> wrote in message
news:n0aq60luid3ts6svsqac9v1ju5tg0ncqs3@4ax.com...
> no im using 3dmark 01se. on the 03 version i get 5545.
>
> paul

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

JustMe wrote:
> what version of 3d mark are you using? surely not 3dmark03

The first post in this thread clearly says 3D Mark 2001SE.
--
~misfit~

> "Pace" <pace123@REMOVETHIShotmail.com> wrote in message
> news:c4i00s$56n$1@sparta.btinternet.com...
>> 16681 3D marks
>> Idle 53C
>> Load 62C
>>
>> AMD Athlon 3200+ @ 2200MHz (200x11)
>> 1024 PC3200 DDR-RAM
>> ATI Radeon 9800 Pro

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

JustMe wrote:
> gads, I'm only getting 3270 with 03. and 10417 with 01I have a
> Barton 2500 at 3200 and 1gb PC2100 ram and a 9600 Pro Video card.

Just goes to show how good the old nVidia ti4 series is. I'm getting 11,546
with a ti4200 on a 1800+ OC'ed to 2.1Ghz.

> though my temps are a lot lower 40c idle and 50 full load

Mine too.
--
~misfit~

> "pberry" <pwrberry@yahoo.co.uk> wrote in message
> news:n0aq60luid3ts6svsqac9v1ju5tg0ncqs3@4ax.com...
>> no im using 3dmark 01se. on the 03 version i get 5545.
>>
>> paul

 

[Apollo]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

"JustMe" <nobody@nowhere.com> wrote in message
news:106rn4v27pvqb2b@corp.supernews.com...
> gads, I'm only getting 3270 with 03. and 10417 with 01I have a Barton
2500
> at 3200 and 1gb PC2100 ram and a 9600 Pro Video card.

Change your ram to good quality PC3200 c2.5 or better and you'll see a big,
big difference. I'm not surprised your scores are low, you are crippling
your cpu with that PC2100 memory.

--
Ian