Sign in with
Sign up | Sign in
Your question

AMD Athlon 64 3200+ or Dual AMD Athlon XP 2800+

Last response: in Overclocking
Share
Anonymous
a b K Overclocking
July 2, 2004 4:00:57 AM

Archived from groups: alt.comp.hardware.overclocking,alt.comp.hardware.overclocking.amd,alt.comp.hardware (More info?)

First of all, sorry for crossposting...

What would you suggest between Athlon 64 3200+ and Dual Athlon XP 2800+?
I mean, which will be more usable in real life (Video processing, games,
and other high-processor-dependent)?
I'll buy it next week so any comment is welcome.....

Aside from that, the rest of configuration will be:

DUAL RAM, 512 MB, DDR, PC-3500, 433 MHz, KINGMAX
DUAL HDD MAXTOR 160 GB, serial ATA, 7200 o/min., 8 MB cache
VGA SAPPHIRE ATI Radeon 9600XT 128 bit, 500 MHz, 256 MB, with tv out & DVI

What do you think about rest of configuration?

Thanks...
Anonymous
a b K Overclocking
July 2, 2004 4:00:58 AM

Archived from groups: alt.comp.hardware.overclocking,alt.comp.hardware.overclocking.amd,alt.comp.hardware (More info?)

On Fri, 02 Jul 2004 00:00:57 +0200, SysCold wrote:

> First of all, sorry for crossposting...
>
> What would you suggest between Athlon 64 3200+ and Dual Athlon XP 2800+?
> I mean, which will be more usable in real life (Video processing, games,
> and other high-processor-dependent)?
>
Depends on if the software you are going to use will take advantage of the
dual cpu. I don't think games do, so the 64 will kill the XP in that area.
It's also much faster in video processing than the XP, but I'm not sure if
your video software will utilize dual cpu's and what the diff would be.

--
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
http://mysite.verizon.net/res0exft/cpu.htm
July 2, 2004 4:00:58 AM

Archived from groups: alt.comp.hardware.overclocking,alt.comp.hardware.overclocking.amd,alt.comp.hardware (More info?)

In article <cc21nk$97f$1@brown.net4u.hr>, syscold@net4u.hr says...
> First of all, sorry for crossposting...
>
> What would you suggest between Athlon 64 3200+ and Dual Athlon XP 2800+?
> I mean, which will be more usable in real life (Video processing, games,
> and other high-processor-dependent)?
> I'll buy it next week so any comment is welcome.....
>
> Aside from that, the rest of configuration will be:
>
> DUAL RAM, 512 MB, DDR, PC-3500, 433 MHz, KINGMAX
> DUAL HDD MAXTOR 160 GB, serial ATA, 7200 o/min., 8 MB cache
> VGA SAPPHIRE ATI Radeon 9600XT 128 bit, 500 MHz, 256 MB, with tv out & DVI
>
> What do you think about rest of configuration?
>
> Thanks...
>


I'd get the single. MP's are only useful if you have software to take
advantage of them. Games don't (for the very most part)... Adobe stuff
might, but it's all a trade off.

If you mean 512 ram total, no, get 1024.
I'd get a 9800pro with 128 megs of ram rather than that 9600 xt.
Related resources
Anonymous
a b K Overclocking
July 2, 2004 2:18:55 PM

Archived from groups: alt.comp.hardware.overclocking,alt.comp.hardware.overclocking.amd,alt.comp.hardware (More info?)

SysCold wrote:
> First of all, sorry for crossposting...
>
> What would you suggest between Athlon 64 3200+ and Dual Athlon XP
> 2800+? I mean, which will be more usable in real life (Video
> processing, games, and other high-processor-dependent)?
> I'll buy it next week so any comment is welcome.....

Are you going to be doing all of the above at once, or do the things that
you're planning to do support SMP? If so, the duallie. If not, then the A64.
For example, I can (my machine is a dual MP2600 rquavalent) be doing
raytracing with POVRay and also be having a game of Battlefield with
essentially no slowdown in either. Give POVRay both CPUs and there's not
uniprocessor machine short of an Itanium that can touch it. However, since
the only dual Socket-A chipset only does AGP4x, and maxes out at below a
150MHz FSB (single-channel memory), the performance I get in games is far
from what you'd get if I ran the CPU at the same speed in a dual-channel,
PC3200, AGP8x motherboard. There's also not much point in getting anything
above low-latency PC2700 (and depending on pricing, a single stick may be
cheaper than two of half the size).

Secondly, if you're wanting to run a duallie, you've got a few options. The
XP2800's run on a high FSB and are multiplier-locked, so you'll have to
mobilise them and enable SMP, and then use them in one of the boards that
supports mobiles in SMP. The Asus is one, and I've made a patched BIOS for
the K7D which works more or less, but still has a couple of minor issues
(warm restarts don't work). An alternative is to buy a couple of mobiles,
and run them in one of the afore mentioned boards. Some people have been
unable to get mobile chips stable in SMP, even when the 3rd L5 is broken, so
this route is not recommended unless you want to be tweaking things for a
while. The final option is just to go and buy two MP2800s. These should drop
straight into any duallie board and work flawlessly.

> Aside from that, the rest of configuration will be:
>
> DUAL RAM, 512 MB, DDR, PC-3500, 433 MHz, KINGMAX
> DUAL HDD MAXTOR 160 GB, serial ATA, 7200 o/min., 8 MB cache
> VGA SAPPHIRE ATI Radeon 9600XT 128 bit, 500 MHz, 256 MB, with tv out
> & DVI
>
> What do you think about rest of configuration?

Looks good to me. You'll have to get a SATA card (I recommend a 64-bit,
66MHz PCI one if you can find one) to run the SATA drives on a K7 duallie.
Unless you're going S939, see if it's cheaper to go one-stick or two sticks
as non-S939 (and the K7 dualle boards) only run in single-channel mode.

--
Michael Brown
www.emboss.co.nz : OOS/RSI software and more :) 
Add michael@ to emboss.co.nz - My inbox is always open
July 3, 2004 7:49:11 AM

Archived from groups: alt.comp.hardware.overclocking,alt.comp.hardware.overclocking.amd,alt.comp.hardware (More info?)

> I changed my mind about graphic card. Now I think I'll get ATI X800, XT
> or PRO. What do you think about that?

I think you must have a lot of money. X800 is a killer good card however,
9800PRO is a lot more bang for the buck. When suggested to spend $50 more on
the video card, you're jumping from ~$200 to ~$450.

Bytheway, I changed my mind about 2004 Honda Accord LX, now I think I'll get
F/A-22 Raptor, what do you think about that? :-)
July 4, 2004 2:53:45 AM

Archived from groups: alt.comp.hardware.overclocking,alt.comp.hardware.overclocking.amd,alt.comp.hardware (More info?)

> I changed my mind about graphic card. Now I think I'll get ATI X800, XT
> or PRO. What do you think about that?

Fine, but prices are all over the map on these new cards. I would check
www.rage3d.com and www.nvnews.net forums to look for deals before buying.

rms
Anonymous
a b K Overclocking
July 4, 2004 8:24:57 AM

Archived from groups: alt.comp.hardware.overclocking,alt.comp.hardware.overclocking.amd,alt.comp.hardware (More info?)

johny wrote:

>>I changed my mind about graphic card. Now I think I'll get ATI X800, XT
>>or PRO. What do you think about that?
>
>
> I think you must have a lot of money. X800 is a killer good card however,
> 9800PRO is a lot more bang for the buck. When suggested to spend $50 more on
> the video card, you're jumping from ~$200 to ~$450.

As I wrote in original post, I'm shooting at high end (if not edge)... I
will give about $1200 for: CPU, Graphic Card, MB and RAM... I think I'll
wait with HDD's for some time...
So, does anyone have anything to add or change in my configuration? It
would be greatly helpfull...
Or should I start new thread?

> Bytheway, I changed my mind about 2004 Honda Accord LX, now I think I'll get
> F/A-22 Raptor, what do you think about that? :-)

I'd rather get MIG. They are faster and mora agile than F's... That
makes them better in close combat... But radar is a bit screwed
comparing to F's... So F's got advantage on distance...

By SysCold
Anonymous
a b K Overclocking
July 4, 2004 8:25:18 AM

Archived from groups: alt.comp.hardware.overclocking,alt.comp.hardware.overclocking.amd,alt.comp.hardware (More info?)

rms wrote:
>>I changed my mind about graphic card. Now I think I'll get ATI X800, XT
>>or PRO. What do you think about that?
>
>
> Fine, but prices are all over the map on these new cards. I would check
> www.rage3d.com and www.nvnews.net forums to look for deals before buying.
>
> rms

Thanks, I checked, and googled much. After all, I have to be sure for
that money what will I buy.
If it wasn't you I'd probably buy 9800. Thanks again.

By SysCold
!