XP2600 or XP2500-M

[kerplunkuk]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

I currently have a XP2600+ Thoroughbred at 166FSB. My new board will be a
Abit NF7 V2.0. I have PC3200 DDR. Will the XP2600 hit the 200 FSB to run
in sync with the ram, or will I have to get the XP2500-M?
Would the difference be noticeable?

All help appreciated.
--
REMOVE .BOLTS to reply
Victoria Concordia Crescit

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

KerplunKuK wrote:
> I currently have a XP2600+ Thoroughbred at 166FSB. My new board will be a
> Abit NF7 V2.0. I have PC3200 DDR. Will the XP2600 hit the 200 FSB to run
> in sync with the ram, or will I have to get the XP2500-M?
> Would the difference be noticeable?
>
> All help appreciated.
Shouldn't be a huge problem. I'm running that CPU at 210FSBx10 in sync
with generic (VTech) PC3200 at 1.65 vcore on a nF2 board (Shuttle AN35N
Ultra). Of course the XP2500-M will do much better, but it will cost
more, and if I went that route I'd get PC3500 or PC4000 memory. Depends
on your budget. If 200FSB is all you want it shouldn't be that difficult.

--
FRH

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

"Frank Hagan" <none@no.net> wrote in message
news:dG%Kc.4605$iK.668@newsread2.news.atl.earthlink.net...
> KerplunKuK wrote:
> > I currently have a XP2600+ Thoroughbred at 166FSB. My new board will be
a
> > Abit NF7 V2.0. I have PC3200 DDR. Will the XP2600 hit the 200 FSB to
run
> > in sync with the ram, or will I have to get the XP2500-M?
> > Would the difference be noticeable?
> >
> > All help appreciated.
> Shouldn't be a huge problem. I'm running that CPU at 210FSBx10 in sync
> with generic (VTech) PC3200 at 1.65 vcore on a nF2 board (Shuttle AN35N
> Ultra). Of course the XP2500-M will do much better, but it will cost
> more, and if I went that route I'd get PC3500 or PC4000 memory. Depends
> on your budget. If 200FSB is all you want it shouldn't be that difficult.
>

I have the same board, are you running the memory in dual-channel mode?

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

Invid-Corg wrote:
> "Frank Hagan" <none@no.net> wrote in message
> news:dG%Kc.4605$iK.668@newsread2.news.atl.earthlink.net...
>
>>KerplunKuK wrote:
>>
>>>I currently have a XP2600+ Thoroughbred at 166FSB. My new board will be
>
> a
>
>>>Abit NF7 V2.0. I have PC3200 DDR. Will the XP2600 hit the 200 FSB to
>
> run
>
>>>in sync with the ram, or will I have to get the XP2500-M?
>>>Would the difference be noticeable?
>>>
>>>All help appreciated.
>>
>>Shouldn't be a huge problem. I'm running that CPU at 210FSBx10 in sync
>>with generic (VTech) PC3200 at 1.65 vcore on a nF2 board (Shuttle AN35N
>>Ultra). Of course the XP2500-M will do much better, but it will cost
>>more, and if I went that route I'd get PC3500 or PC4000 memory. Depends
>>on your budget. If 200FSB is all you want it shouldn't be that difficult.
>>
>
>
> I have the same board, are you running the memory in dual-channel mode?
>
>
No. Just a single 512MB module. My other AN35N (XP2500) has 2x512MB of
Kingston PC3500 HyperX running dual FSB210x10.5 at 1.65 vcore.

--
FRH

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

"KerplunKuK" <kerplunk.BOLTS@greenday.freeserve.co.uk> wrote in message
news:2m35mlFgh5i3U1@uni-berlin.de...
> I currently have a XP2600+ Thoroughbred at 166FSB. My new board will be a
> Abit NF7 V2.0. I have PC3200 DDR. Will the XP2600 hit the 200 FSB to run
> in sync with the ram, or will I have to get the XP2500-M?
> Would the difference be noticeable?


Maybe.
Maybe not.


>
> All help appreciated.
> --
> REMOVE .BOLTS to reply
> Victoria Concordia Crescit
>
>

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

I would like to know that as well got the Abit board and noworder the
Mobile 2500

2.6 ghz is enough for me :0



On Tue, 20 Jul 2004 01:00:52 +0100, "KerplunKuK"
<kerplunk.BOLTS@greenday.freeserve.co.uk> wrote:

>I currently have a XP2600+ Thoroughbred at 166FSB. My new board will be a
>Abit NF7 V2.0. I have PC3200 DDR. Will the XP2600 hit the 200 FSB to run
>in sync with the ram, or will I have to get the XP2500-M?
>Would the difference be noticeable?
>
>All help appreciated.