G
Guest
Guest
Archived from groups: alt.comp.hardware.overclocking.amd (More info?)
Hi there.
I have Giga-byte GA-7VAX Mainborad, Duron 1200, and PC2100 2*256 RAM.
I wanted to overclock my Duron 1200, but before pencil work i was trying to
overclock only with FSB. In standard bios features i can rise FSB from 100
to 132 Mhz, but 1320 Mhz is maximum, what i managed to do (110 Mhz FSB). I
thought, if i rise FSB to 133 Mhz, PCI and AGP clocks become back 33 and 66
Mhz.
My mainborad is rev 1.2 - there is only one Swith to set FSB (100 Mhz / Auto
= 133 Mhz). Default is 100 Mhz. If i change SW1 to Auto, my PC don't starts
(black screen imediately after turning power ON). Is 1600 Mhz to high for my
Duron? Is it necessary to low multipler (= penciling processor). Or maybe
problem is elsewher? Maybe before i swith SW1 i should rise Voltage? How
much? Maybe i should upgrade bios?
Thank You for all help
Greetings
Greg.
Hi there.
I have Giga-byte GA-7VAX Mainborad, Duron 1200, and PC2100 2*256 RAM.
I wanted to overclock my Duron 1200, but before pencil work i was trying to
overclock only with FSB. In standard bios features i can rise FSB from 100
to 132 Mhz, but 1320 Mhz is maximum, what i managed to do (110 Mhz FSB). I
thought, if i rise FSB to 133 Mhz, PCI and AGP clocks become back 33 and 66
Mhz.
My mainborad is rev 1.2 - there is only one Swith to set FSB (100 Mhz / Auto
= 133 Mhz). Default is 100 Mhz. If i change SW1 to Auto, my PC don't starts
(black screen imediately after turning power ON). Is 1600 Mhz to high for my
Duron? Is it necessary to low multipler (= penciling processor). Or maybe
problem is elsewher? Maybe before i swith SW1 i should rise Voltage? How
much? Maybe i should upgrade bios?
Thank You for all help
Greetings
Greg.