HELP!! SEMPRON 2200 epox nforce 2 ultra 400 ( memory 256 k..

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

what should i do to overclock fsb to 200 Mhz??

which voltage should i turn up??

i set

1.725 cpu

1,6 AGP (radeon 9550)

chipset default

and it doesn't work (((

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

vollam wrote:
> what should i do to overclock fsb to 200 Mhz??
>
> which voltage should i turn up??
>
> i set
>
> 1.725 cpu
>
> 1,6 AGP (radeon 9550)
>
> chipset default
>
> and it doesn't work (((
Sempron is not good for overclocking unless you get the socket 754 sempron.

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

On Fri, 10 Dec 2004 16:05:51 -0800, vollam wrote:

> what should i do to overclock fsb to 200 Mhz??
> which voltage should i turn up??
> i set 1.725 cpu
> 1,6 AGP (radeon 9550)
> chipset default
>
> and it doesn't work (((

Lower ram timings. Even when you get it going it's not going to give you
much of an increase in clockspeed with only a 9 multiplier and only a
33MHz increase of FSB speed. The default speed is 1500MHz (9x166) and
only 1800MHz at 9x200. I know it's not consolation now, but a socket A
Sempron is a poor choice for a performance cpu. See Sempron in link below.

--
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
http://mysite.verizon.net/res0exft/cpu.htm

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking.amd (More info?)

"vollam" <vollam@wp.pl> wrote in message
news:d363d16.0412101605.3966e661@posting.google.com...
> what should i do to overclock fsb to 200 Mhz??
>
> which voltage should i turn up??
>
> i set
>
> 1.725 cpu
>
> 1,6 AGP (radeon 9550)
>
> chipset default
>
> and it doesn't work (((

isnt sempron multiplier locked?

does the board support 200 fsb?

cpu voltage should be 1.6 ish 1.68 ish i would say anyhw