p4 voltage

[Guest]

Archived from groups: alt.comp.hardware.overclocking (More info?)

Hi there my setup is
2.8C p4 running at 3.5Ghz (14*250 dividor at 5:4)
in the bios the voltage is set at 1.6250V (on an ic7 max 3)
but mbm reports 1.57V to 1.62V and the average being 1.6V. I have no
stability problems, but am i askin too much from this antec 330W psu (also
driving 4 hard drives)

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking (More info?)

Figurt wrote:
> Hi there my setup is
> 2.8C p4 running at 3.5Ghz (14*250 dividor at 5:4)
> in the bios the voltage is set at 1.6250V (on an ic7 max 3)
> but mbm reports 1.57V to 1.62V and the average being 1.6V. I have no
> stability problems, but am i askin too much from this antec 330W psu
> (also driving 4 hard drives)

See the post that would have been at the top of the list when you posted.
Yes, the one called "Vcore measurement is low - Is it a problem?". Possibly,
just possibly, this may be related to a P4 with a lower-than-expected vcore.

--
Michael Brown
www.emboss.co.nz : OOS/RSI software and more
Add michael@ to emboss.co.nz - My inbox is always open