Archived from groups: alt.comp.hardware.overclocking (More info?)
"Daniel" <djb2002@gmx.net> wrote in message
news:2qip91F10ahr0U1@uni-berlin.de...
> My CPU temperature runs at approx 46c when idle and goes up to about 51c
> with processor intensive usage.
>
> Is this normal, or is it a bit on the high side?
>
> Thanks in advance,
>
> Daniel
>
Those are pretty good temps.
--
*****Replace 'NOSPAM' with 'btinternet' in the reply address*****
Archived from groups: alt.comp.hardware.overclocking (More info?)
"BigBadger" <big_badger@NOSPAM.com> wrote in message
news:ci1cie$5j9$1@newsg2.svr.pol.co.uk...
> "Daniel" <djb2002@gmx.net> wrote in message
> news:2qip91F10ahr0U1@uni-berlin.de...
>> My CPU temperature runs at approx 46c when idle and goes up to about 51c
>> with processor intensive usage.
>>
>> Is this normal, or is it a bit on the high side?
>>
>> Thanks in advance,
>>
>> Daniel
>>
> Those are pretty good temps.
Thanks
I am using Motherboard Monitor 5 to get those temps (So I'm not sure how
accurate they are),
Archived from groups: alt.comp.hardware.overclocking (More info?)
Daniel wrote:
> My CPU temperature runs at approx 46c when idle and goes up to about
> 51c with processor intensive usage.
>
> Is this normal, or is it a bit on the high side?
Unfortunately, CPU temperatures don't mean a lot. There's so much variation
between boards, BIOS revisions, and even identical boards that any sort of
absolute reference is pointless. The only thing they are good for (and even
then only if it's a core diode) is seeing if a change in cooling
configuration increases or decreases the CPU temperature. If you're using
air cooling and it's prime95 stable, then the temperatures are fine (ie:
you're not damaging the CPU or anything like that).
--
Michael Brown
www.emboss.co.nz : OOS/RSI software and more Add michael@ to emboss.co.nz - My inbox is always open
>Daniel wrote:
>> My CPU temperature runs at approx 46c when idle and goes up to about
>> 51c with processor intensive usage.
>>
>> Is this normal, or is it a bit on the high side?
>
>Unfortunately, CPU temperatures don't mean a lot. There's so much variation
>between boards, BIOS revisions, and even identical boards that any sort of
>absolute reference is pointless. The only thing they are good for (and even
>then only if it's a core diode) is seeing if a change in cooling
>configuration increases or decreases the CPU temperature. If you're using
>air cooling and it's prime95 stable, then the temperatures are fine (ie:
>you're not damaging the CPU or anything like that).
Archived from groups: alt.comp.hardware.overclocking (More info?)
"Little TeaPot" <Scully@yahoo.com.au> wrote in message
news:1nr8k05f2v3j5bn5hneolgd0s7i3mn89g6@4ax.com...
>
>
> My mobile Barton overcloked to 2.5ghz is 34c idle ?, you say 46idle
> for a 3200 ? at 2.2 ghz is good ?
>
>
> Though iam talking these readings on a cold mornng, but at day time,
> its like 36,38c idle.
>
>
Idle temps are unimportant. It's the load temp that matters, and 51C under
full load is not bad at all. Of course the cooler the better if your
overclocking.
--
*****Replace 'NOSPAM' with 'btinternet' in the reply address*****
Archived from groups: alt.comp.hardware.overclocking (More info?)
In article <ci1v42$ocu$1@news7.svr.pol.co.uk>, big_badger@NOSPAM.com
says...
> "Little TeaPot" <Scully@yahoo.com.au> wrote in message
> news:1nr8k05f2v3j5bn5hneolgd0s7i3mn89g6@4ax.com...
> >
> >
> > My mobile Barton overcloked to 2.5ghz is 34c idle ?, you say 46idle
> > for a 3200 ? at 2.2 ghz is good ?
> >
> >
> > Though iam talking these readings on a cold mornng, but at day time,
> > its like 36,38c idle.
> >
> >
> Idle temps are unimportant. It's the load temp that matters, and 51C under
> full load is not bad at all. Of course the cooler the better if your
> overclocking.
>
>
My 1800 oc'd to 19xx mhz is 47 degrees at full load, idles around 39-41
depending on my AC habits.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.