Archived from groups: alt.comp.hardware.overclocking (
More info?)
fish wrote:
> So why can't it complete a DV Render with a Thermalright SLK-900u?!?
>
> I have to downclock it to drop the temp.
>
> P4E 3.0
> Abit IS7
> 512MB PC3200 (Corsair XMS).
> ATI 9600 with two 21" monitors
> (2) WD120SE (SATA) Raid-0
> Enermax 400w PSU
>
> When rendering video with Pinnacle Studio8, temps would hit mid to upper
> 60's.
> The PC shuts down shortly after hitting 68ºc.
Just off hand I'd say you have a temperature shutdown set in either BIOS or
some Windows monitoring program because the P4 throttles on temp, not shutdown.
> I opened up the case which
> made little difference. I then underclocked the PC to 2500Mhz, the temps
> dropped 5 to 8 degrees. I was able to complete the render at 2500Mhz.
>
>
>
>
> "N
NE_Here" <AnyOne@AnyWhere.com> wrote in message
> news:41ae7f72$1_4@alt.athenanews.com...
>
>>80ºC under heavy load is normal, & 48 - 50ºC for idle.
>>
>>
>
>
>