Archived from groups: alt.comp.hardware.homebuilt (More info?)

Gidday,, after some time and testing (aka_throwing bits out)
I have arrived at a definite modem driver config problem
with this machine. I got to this point in time with guidance
from the previous thread, I am hoping to impinge on the
knowledge base yet again and ask... please check this
connect log to offer an explanation as to _ why_ I may be
getting :
TSP(000): Linevent: Line_Close
?
I
Smartlink 56K drivers install the modem and according to
"query modem" all is working fine. Dialout immediately gives
"error 628 - the remote computer terminated blah blah"
[ about 1.5 secs into connect script].
COM1 or COM2 connected makes no difference (visible).
Deinstalling all the driver files and registry entrys and
then reinstalling the SML 56 driver has not worked so far as
a complete fix. The modem install is fine but the modem
does not connect internally, it seems.
Maybe I need to rip out the unimodem files listed in the
log?
The query shows the Country flag set
The connect log says "no country",, is there a clue here?
And I AM wondering why the log identifies the modem as a
5630 and not the 5600 which Clevo supplies drivers for.

Under Win98SE, the modem works fine. With XPro (standard
write)...sigh, its a no show !

Help ! ;- ))

-------------------------------------------------------------------
query modem__ after reboot & rausing messenger boot [COM2]
-----------------------------------------------------------

ATQ0V1E0 - OK
AT+GMM - Smart Link 56K Voice Modem
Ver3.60.03
AT+FCLASS=? - 0,1,8
AT#CLS=? - 0,1,8
AT+GCI? - +GCI:09
AT+GCI=? -
+GCIB5,02,07,09,0A,0C,0F,16,1A,1B,20,25,26,2D,2E,31,36,B8,3C,3D,42,46,50,51,52,53,54,57,58,59,00,5E,61,62,64,69,6C,70,73,77,7B,7E,82,83,84,88,89,8A,8B,8E,98,9C,9F,A0,A1,A5,A6,A9,AD,AE,B3,B4,B7,BC)
ATI1 - Smart Link 56K Voice Modem
Smart Link (www.smlink.com)
Ver3.60.03
ATI2 - Smart Link (www.smlink.com)
Ver3.60.03
MV (CID)
ATI3 - Smart Link (www.smlink.com)
HAMR5603(Sec) on SiS
ATI4 - Active Profile:
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008
S06=004 S07=060
S08=002 S09=006 S10=128 S11=090 S12=050 S13=000
S14=000 S15=001
S16=001 S17=000 S18=000 S19=000 S20=000 S21=000
S22=000 S23=000
S24=009 S25=000 S26=000 S27=008 S28=000 S29=001
S30=002 S31=001
S32=092 S33=009 S34=034 S35=000 S36=000 S37=000
S38=000 S39=002
S40=000 S41=000 S42=000 S43=000 S44=000 S45=250
S46=017 S47=000
S48=000 S49=000 S50=000 S51=000 S52=000 S53=000
S54=000 S55=000
S56=004 S57=000 S58=000 S59=000 S60=001 S61=000
S62=001 S63=000
S64=000 S65=000 S66=000 S67=000 S68=000 S69=000
S70=000 S71=000
S72=019 S73=003 S74=153 S75=000 S76=004 S77=010
S78=000 S79=070
S80=070 S81=000 S82=002 S83=055 S84=000 S85=000
S86=000 S87=000
S88=001
ATI5 - Stored Profile 0:
Not defined
ATI6 - Stored Profile 1:
Not defined
ATI7 - Country: AUSTRALIA
Serial Number: 98638029
Protocol Factor: dac3928
========================================================
Dialup using Com2
----------------------------------------------------

04-24-2004 12:15:00.024 - File:
C:\WINDOWS\System32\tapisrv.dll, Version 5.1.2505
04-24-2004 12:15:00.034 - File:
C:\WINDOWS\System32\unimdm.tsp, Version 5.1.2505
04-24-2004 12:15:00.034 - File:
C:\WINDOWS\System32\unimdmat.dll, Version 5.1.2505
04-24-2004 12:15:00.034 - File:
C:\WINDOWS\System32\uniplat.dll, Version 5.1.2505
04-24-2004 12:15:00.034 - File:
C:\WINDOWS\System32\drivers\modem.sys, Version 5.1.2505
04-24-2004 12:15:00.034 - File:
C:\WINDOWS\System32\modemui.dll, Version 5.1.2505
04-24-2004 12:15:00.034 - File:
C:\WINDOWS\System32\mdminst.dll, Version 5.1.2505
04-24-2004 12:15:00.034 - Modem type: Smart Link 56K Voice
Modem
04-24-2004 12:15:00.034 - Modem inf path: oem3.inf
04-24-2004 12:15:00.034 - Modem inf section: Modem1
04-24-2004 12:15:00.034 - Matching hardware ID:
pci\ven_1039&dev_7013
04-24-2004 12:15:00.585 - Opening Modem
04-24-2004 12:15:00.585 - 115200,8,N,1, ctsfl=1, rtsctl=2
04-24-2004 12:15:00.585 - Initializing modem.
04-24-2004 12:15:00.595 - Send: AT<cr>
04-24-2004 12:15:00.595 - Recv: AT<cr>
04-24-2004 12:15:00.595 - Command Echo
04-24-2004 12:15:00.595 - Recv: <cr><lf>OK<cr><lf>
04-24-2004 12:15:00.595 - Interpreted response: OK
04-24-2004 12:15:00.605 - Send: AT &F E1 V1 &A3 &D2 &C1 S0=0
[ESM<cr>
04-24-2004 12:15:00.605 - Recv: AT &F E1 V1 &A3 &D2 &C1 S0=0
[ESM<cr>
04-24-2004 12:15:00.605 - Command Echo
04-24-2004 12:15:00.615 - Recv: <cr><lf>OK<cr><lf>
04-24-2004 12:15:00.615 - Interpreted response: OK
04-24-2004 12:15:00.625 - Send:
ATS7=60S19=0L1M1\N3%C3&H1N1X4<cr>
04-24-2004 12:15:00.635 - Recv:
ATS7=60S19=0L1M1\N3%C3&H1N1X4<cr>
04-24-2004 12:15:00.635 - Command Echo
04-24-2004 12:15:00.635 - Recv: <cr><lf>OK<cr><lf>
04-24-2004 12:15:00.635 - Interpreted response: OK
04-24-2004 12:15:00.635 - Sending Country Select Command
04-24-2004 12:15:00.645 - Send: at+gci?<cr>
04-24-2004 12:15:00.655 - Recv: at+gci?<cr>
04-24-2004 12:15:00.655 - Command Echo
04-24-2004 12:15:00.655 - Recv: <cr><lf>+
04-24-2004 12:15:00.655 - Unknown Response
04-24-2004 12:15:00.675 - TSP(0000): LINEEVENT: LINE_CLOSE
04-24-2004 12:15:00.675 - Session Statistics:
04-24-2004 12:15:00.675 - Reads : 110 bytes
04-24-2004 12:15:00.675 - Writes: 75 bytes
04-24-2004 12:15:00.735 - File:
C:\WINDOWS\System32\tapisrv.dll, Version 5.1.2505
04-24-2004 12:15:00.735 - File:
C:\WINDOWS\System32\unimdm.tsp, Version 5.1.2505
04-24-2004 12:15:00.735 - File:
C:\WINDOWS\System32\unimdmat.dll, Version 5.1.2505
04-24-2004 12:15:00.735 - File:
C:\WINDOWS\System32\uniplat.dll, Version 5.1.2505
04-24-2004 12:15:00.735 - File:
C:\WINDOWS\System32\drivers\modem.sys, Version 5.1.2505
04-24-2004 12:15:00.735 - File:
C:\WINDOWS\System32\modemui.dll, Version 5.1.2505
04-24-2004 12:15:00.735 - File:
C:\WINDOWS\System32\mdminst.dll, Version 5.1.2505
04-24-2004 12:15:00.735 - Modem type: Smart Link 56K Voice
Modem
04-24-2004 12:15:00.735 - Modem inf path: oem3.inf
04-24-2004 12:15:00.735 - Modem inf section: Modem1
04-24-2004 12:15:00.735 - Matching hardware ID:
pci\ven_1039&dev_7013
04-24-2004 12:15:01.256 - Opening Modem
04-24-2004 12:15:01.256 - 115200,8,N,1, ctsfl=1, rtsctl=2
04-24-2004 12:15:01.256 - Initializing modem.
04-24-2004 12:15:01.266 - Send: AT<cr>
04-24-2004 12:15:01.266 - Recv: AT<cr>
04-24-2004 12:15:01.266 - Command Echo
04-24-2004 12:15:01.266 - Recv: <cr><lf>OK<cr><lf>
04-24-2004 12:15:01.266 - Interpreted response: OK
04-24-2004 12:15:01.276 - Send: AT &F E1 V1 &A3 &D2 &C1 S0=0
[ESM<cr>
04-24-2004 12:15:01.276 - Recv: AT &F E1 V1 &A3 &D2 &C1 S0=0
[ESM<cr>
04-24-2004 12:15:01.276 - Command Echo
04-24-2004 12:15:01.286 - Recv: <cr><lf>OK<cr><lf>
04-24-2004 12:15:01.286 - Interpreted response: OK
04-24-2004 12:15:01.296 - Send:
ATS7=60S19=0L1M1\N3%C3&H1N1X4<cr>
04-24-2004 12:15:01.296 - Recv:
ATS7=60S19=0L1M1\N3%C3&H1N1X4<cr>
04-24-2004 12:15:01.296 - Command Echo
04-24-2004 12:15:01.296 - Recv: <cr><lf>OK<cr><lf>
04-24-2004 12:15:01.296 - Interpreted response: OK
04-24-2004 12:15:01.296 - Sending Country Select Command
04-24-2004 12:15:01.306 - Send: at+gci?<cr>
04-24-2004 12:15:01.306 - Recv: at+gci?<cr>
04-24-2004 12:15:01.306 - Command Echo
04-24-2004 12:15:01.306 - Recv: <cr><lf>+
04-24-2004 12:15:01.306 - Unknown Response
04-24-2004 12:15:01.306 - Session Statistics:
04-24-2004 12:15:01.306 - Reads : 96 bytes
04-24-2004 12:15:01.306 - Writes: 75 bytes
----------------------------------------------------------------------------------

Archived from groups: alt.comp.hardware.homebuilt,comp.dcom.modems (More info?)

On Sun, 25 Apr 2004 20:09:59 +0930, pikka <pikka@home.not> put finger
to keyboard and composed:

>Gidday,, after some time and testing (aka_throwing bits out)
>I have arrived at a definite modem driver config problem
>with this machine. I got to this point in time with guidance
>from the previous thread, I am hoping to impinge on the
>knowledge base yet again and ask... please check this
>connect log to offer an explanation as to _ why_ I may be
>getting :
>TSP(000): Linevent: Line_Close
>?
>I
>Smartlink 56K drivers install the modem and according to
>"query modem" all is working fine. Dialout immediately gives
>"error 628 - the remote computer terminated blah blah"
>[ about 1.5 secs into connect script].
>COM1 or COM2 connected makes no difference (visible).
>Deinstalling all the driver files and registry entrys and
>then reinstalling the SML 56 driver has not worked so far as
>a complete fix. The modem install is fine but the modem
>does not connect internally, it seems.
>Maybe I need to rip out the unimodem files listed in the
>log?
>The query shows the Country flag set
>The connect log says "no country",, is there a clue here?
>And I AM wondering why the log identifies the modem as a
>5630 and not the 5600 which Clevo supplies drivers for.
>
>Under Win98SE, the modem works fine. With XPro (standard
>write)...sigh, its a no show !
>
>Help ! ;- ))
>
>-------------------------------------------------------------------
>query modem__ after reboot & rausing messenger boot [COM2]
>-----------------------------------------------------------
>
>ATQ0V1E0 - OK
>AT+GMM - Smart Link 56K Voice Modem
> Ver3.60.03
>AT+FCLASS=? - 0,1,8
>AT#CLS=? - 0,1,8
>AT+GCI? - +GCI:09
>AT+GCI=? -
>+GCIB5,02,07,09,0A,0C,0F,16,1A,1B,20,25,26,2D,2E,31,36,B8,3C,3D,42,46,50,51,52,53,54,57,58,59,00,5E,61,62,64,69,6C,70,73,77,7B,7E,82,83,84,88,89,8A,8B,8E,98,9C,9F,A0,A1,A5,A6,A9,AD,AE,B3,B4,B7,BC)
>ATI1 - Smart Link 56K Voice Modem
> Smart Link (www.smlink.com)
> Ver3.60.03
>ATI2 - Smart Link (www.smlink.com)
> Ver3.60.03
> MV (CID)
>ATI3 - Smart Link (www.smlink.com)
> HAMR5603(Sec) on SiS
>ATI4 - Active Profile:
> S00=000 S01=000 S02=043 S03=013 S04=010 S05=008
>S06=004 S07=060
> S08=002 S09=006 S10=128 S11=090 S12=050 S13=000
>S14=000 S15=001
> S16=001 S17=000 S18=000 S19=000 S20=000 S21=000
>S22=000 S23=000
> S24=009 S25=000 S26=000 S27=008 S28=000 S29=001
>S30=002 S31=001
> S32=092 S33=009 S34=034 S35=000 S36=000 S37=000
>S38=000 S39=002
> S40=000 S41=000 S42=000 S43=000 S44=000 S45=250
>S46=017 S47=000
> S48=000 S49=000 S50=000 S51=000 S52=000 S53=000
>S54=000 S55=000
> S56=004 S57=000 S58=000 S59=000 S60=001 S61=000
>S62=001 S63=000
> S64=000 S65=000 S66=000 S67=000 S68=000 S69=000
>S70=000 S71=000
> S72=019 S73=003 S74=153 S75=000 S76=004 S77=010
>S78=000 S79=070
> S80=070 S81=000 S82=002 S83=055 S84=000 S85=000
>S86=000 S87=000
> S88=001
>ATI5 - Stored Profile 0:
> Not defined
>ATI6 - Stored Profile 1:
> Not defined
>ATI7 - Country: AUSTRALIA
> Serial Number: 98638029
> Protocol Factor: dac3928
>========================================================
>Dialup using Com2
>----------------------------------------------------
>
>04-24-2004 12:15:00.024 - File:
>C:\WINDOWS\System32\tapisrv.dll, Version 5.1.2505
>04-24-2004 12:15:00.034 - File:
>C:\WINDOWS\System32\unimdm.tsp, Version 5.1.2505
>04-24-2004 12:15:00.034 - File:
>C:\WINDOWS\System32\unimdmat.dll, Version 5.1.2505
>04-24-2004 12:15:00.034 - File:
>C:\WINDOWS\System32\uniplat.dll, Version 5.1.2505
>04-24-2004 12:15:00.034 - File:
>C:\WINDOWS\System32\drivers\modem.sys, Version 5.1.2505
>04-24-2004 12:15:00.034 - File:
>C:\WINDOWS\System32\modemui.dll, Version 5.1.2505
>04-24-2004 12:15:00.034 - File:
>C:\WINDOWS\System32\mdminst.dll, Version 5.1.2505
>04-24-2004 12:15:00.034 - Modem type: Smart Link 56K Voice
>Modem
>04-24-2004 12:15:00.034 - Modem inf path: oem3.inf
>04-24-2004 12:15:00.034 - Modem inf section: Modem1
>04-24-2004 12:15:00.034 - Matching hardware ID:
>pci\ven_1039&dev_7013
>04-24-2004 12:15:00.585 - Opening Modem
>04-24-2004 12:15:00.585 - 115200,8,N,1, ctsfl=1, rtsctl=2
>04-24-2004 12:15:00.585 - Initializing modem.
>04-24-2004 12:15:00.595 - Send: AT<cr>
>04-24-2004 12:15:00.595 - Recv: AT<cr>
>04-24-2004 12:15:00.595 - Command Echo
>04-24-2004 12:15:00.595 - Recv: <cr><lf>OK<cr><lf>
>04-24-2004 12:15:00.595 - Interpreted response: OK
>04-24-2004 12:15:00.605 - Send: AT &F E1 V1 &A3 &D2 &C1 S0=0
>[ESM<cr>
>04-24-2004 12:15:00.605 - Recv: AT &F E1 V1 &A3 &D2 &C1 S0=0
>[ESM<cr>
>04-24-2004 12:15:00.605 - Command Echo
>04-24-2004 12:15:00.615 - Recv: <cr><lf>OK<cr><lf>
>04-24-2004 12:15:00.615 - Interpreted response: OK
>04-24-2004 12:15:00.625 - Send:
>ATS7=60S19=0L1M1\N3%C3&H1N1X4<cr>
>04-24-2004 12:15:00.635 - Recv:
>ATS7=60S19=0L1M1\N3%C3&H1N1X4<cr>
>04-24-2004 12:15:00.635 - Command Echo
>04-24-2004 12:15:00.635 - Recv: <cr><lf>OK<cr><lf>
>04-24-2004 12:15:00.635 - Interpreted response: OK
>04-24-2004 12:15:00.635 - Sending Country Select Command
>04-24-2004 12:15:00.645 - Send: at+gci?<cr>
>04-24-2004 12:15:00.655 - Recv: at+gci?<cr>
>04-24-2004 12:15:00.655 - Command Echo
>04-24-2004 12:15:00.655 - Recv: <cr><lf>+
>04-24-2004 12:15:00.655 - Unknown Response
>04-24-2004 12:15:00.675 - TSP(0000): LINEEVENT: LINE_CLOSE
>04-24-2004 12:15:00.675 - Session Statistics:
>04-24-2004 12:15:00.675 - Reads : 110 bytes
>04-24-2004 12:15:00.675 - Writes: 75 bytes
>04-24-2004 12:15:00.735 - File:
>C:\WINDOWS\System32\tapisrv.dll, Version 5.1.2505
>04-24-2004 12:15:00.735 - File:
>C:\WINDOWS\System32\unimdm.tsp, Version 5.1.2505
>04-24-2004 12:15:00.735 - File:
>C:\WINDOWS\System32\unimdmat.dll, Version 5.1.2505
>04-24-2004 12:15:00.735 - File:
>C:\WINDOWS\System32\uniplat.dll, Version 5.1.2505
>04-24-2004 12:15:00.735 - File:
>C:\WINDOWS\System32\drivers\modem.sys, Version 5.1.2505
>04-24-2004 12:15:00.735 - File:
>C:\WINDOWS\System32\modemui.dll, Version 5.1.2505
>04-24-2004 12:15:00.735 - File:
>C:\WINDOWS\System32\mdminst.dll, Version 5.1.2505
>04-24-2004 12:15:00.735 - Modem type: Smart Link 56K Voice
>Modem
>04-24-2004 12:15:00.735 - Modem inf path: oem3.inf
>04-24-2004 12:15:00.735 - Modem inf section: Modem1
>04-24-2004 12:15:00.735 - Matching hardware ID:
>pci\ven_1039&dev_7013
>04-24-2004 12:15:01.256 - Opening Modem
>04-24-2004 12:15:01.256 - 115200,8,N,1, ctsfl=1, rtsctl=2
>04-24-2004 12:15:01.256 - Initializing modem.
>04-24-2004 12:15:01.266 - Send: AT<cr>
>04-24-2004 12:15:01.266 - Recv: AT<cr>
>04-24-2004 12:15:01.266 - Command Echo
>04-24-2004 12:15:01.266 - Recv: <cr><lf>OK<cr><lf>
>04-24-2004 12:15:01.266 - Interpreted response: OK
>04-24-2004 12:15:01.276 - Send: AT &F E1 V1 &A3 &D2 &C1 S0=0
>[ESM<cr>
>04-24-2004 12:15:01.276 - Recv: AT &F E1 V1 &A3 &D2 &C1 S0=0
>[ESM<cr>
>04-24-2004 12:15:01.276 - Command Echo
>04-24-2004 12:15:01.286 - Recv: <cr><lf>OK<cr><lf>
>04-24-2004 12:15:01.286 - Interpreted response: OK
>04-24-2004 12:15:01.296 - Send:
>ATS7=60S19=0L1M1\N3%C3&H1N1X4<cr>
>04-24-2004 12:15:01.296 - Recv:
>ATS7=60S19=0L1M1\N3%C3&H1N1X4<cr>
>04-24-2004 12:15:01.296 - Command Echo
>04-24-2004 12:15:01.296 - Recv: <cr><lf>OK<cr><lf>
>04-24-2004 12:15:01.296 - Interpreted response: OK
>04-24-2004 12:15:01.296 - Sending Country Select Command
>04-24-2004 12:15:01.306 - Send: at+gci?<cr>
>04-24-2004 12:15:01.306 - Recv: at+gci?<cr>
>04-24-2004 12:15:01.306 - Command Echo
>04-24-2004 12:15:01.306 - Recv: <cr><lf>+
>04-24-2004 12:15:01.306 - Unknown Response
>04-24-2004 12:15:01.306 - Session Statistics:
>04-24-2004 12:15:01.306 - Reads : 96 bytes
>04-24-2004 12:15:01.306 - Writes: 75 bytes
>----------------------------------------------------------------------------------

I have taken the liberty of reposting your query to comp.dcom.modems
which is probably a better forum for this type of question.

Having said that, I don't know much about your modem's chipset, but I
managed to find the following info. It seems that yours is an AMR
(Audio Modem Riser) softmodem.

======================================================
Product descriptions (SmartPCI, SmartRiser, SmartUSB):
http://www.smlink.com/main/index1.php?ln=en&main_id=15

Smart Link has two main product types:

Internal modem - V.90/92 modems in a form factor of: PCI, Mini PCI,
AMR, CNR and MDC

External modem - V.90/92 modems in a form factor of: USB
======================================================

The AT command set is here:
http://www.smlink.com/main/down/ATCommands.pdf

Here are the downloads, including Windows/Linux drivers:
http://www.smlink.com/main/index1.php?ln=en&main_id=20

There appears to be one XP driver archive for all modem types:

File Name: SLA56-V3.60.03-MV-WIN2K-XP.exe
Driver Version: 3.60.03
Driver Date: November 17, 2003
Driver Size: 3.2 MB

.... and a Win98 driver:

File Name: SLA56-V3.60.03-MV-WIN98.exe
Driver Version: 3.60.03
Driver Date: November 17, 2003
Driver Size: 3.2 MB

Some Smartlink info can be found here:
http://www.modemsite.com/56k/smartlink.asp

Here is some chipset info I found at a Linux site:

=========================================================
Si3012-BS Phone Line Interface N. A./JPN 16-pin SOIC
Si3012-KS Phone Line Interface N. A./JPN 16-pin SOIC
Si3014-BS Phone Line Interface International 16-pin SOIC
Si3014-KS Phone Line Interface International 16-pin SOIC
Si3024-BS AC97 Interface 16-pin SOIC
Si3024-KS AC97 Interface 16-pin SOIC
HAMR5603 AC97 Interface 16-pin SOIC
SL1500 PCI Bus Interface 80-pin LQFP

SmartPCI56-INT = Si3012 + HAMR5603 + SL1500
SmartPCI56-INT = Si3014 + HAMR5603 + SL1500
=========================================================

Your modem probably has the Si301x phone line interface and the
HAMR5603 AC97 interface. You may want to check that, if at all
possible, just to ensure that the driver is detecting it correctly.

Your modemlog suggests that Dial-Up Networking aborts when it cannot
set or determine the modem's country code. Clearly the modem is set up
for Australia (probably via a Control Panel applet), so if you could
find a way to prevent DUN from fiddling with this parameter, then the
call may proceed normally. Unfortunately, as yours is the first
modemlog I've seen where country codes are set in this way, I have no
idea how to do this.

What is confusing is the part where DUN is "Sending [the] Country
Select Command". The command, AT+GCI?, queries the country code rather
than setting it. The correct command for setting the code to
"Australia" is AT+GCI=09. In any case, the modem has attempted to
respond with "<cr><lf>+GCI=09", but DUN has not detected the entire
string.

If DUN is expecting a "<cr><lf>OK" response at this point, then
perhaps you could trick it into interpreting the "<cr><lf>+" as an OK.
You could do this by adding the "<cr><lf>+" string to the Responses
section of your registry or your INF file (mdmhamrw.inf), as follows:

HKR,Responses,"<cr><lf>+",1, 00, 00, 00,00,00,00, 0,0,0,0


- Franc Zabkar
--
Please remove one 's' from my address when replying by email.