Tom's Hardware > Forum > Computer Peripherals > Printers > Tektronix Phaser 780 color printer problem

Tektronix Phaser 780 color printer problem

Forum Computer Peripherals : Printers - Tektronix Phaser 780 color printer problem

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Anonymous   08-25-2004 at 02:05:39 PM

Archived from groups: comp.periphs.printers (More info?)

 

Anyone seen this problem before:

http://home.broadpark.no/~iroed/te [...] 20test.jpg

http://home.broadpark.no/~iroed/te [...] 20test.jpg

http://home.broadpark.no/~iroed/te [...] 20test.jpg

http://home.broadpark.no/~iroed/te [...] 20test.jpg

http://home.broadpark.no/~iroed/te [...] 20test.jpg

could it be the fusor? or is it someting with the imaging unit?
the testprint is on A4 sideways.
All advise welcome.

Regards Frank

Add a reply
Sponsored Links
Register or log in to remove.
Anonymous   08-25-2004 at 02:05:40 PM
- 0 +

Archived from groups: comp.periphs.printers (More info?)

 

Hi.

What about the paper?
Try another-same output?

Yes: than...

Fusing-area probably is the cause of the Problem.

I don´t know much about the Tektronix, but is there a
fuser oil roller build into the fusing? Maybe this is damaged.
Take out the fusing and have a look on the rollers, is there any kind of
dirt (old toner)?

Matthias

Frank Roed wrote:
> Anyone seen this problem before:
>
> http://home.broadpark.no/~iroed/te [...] 20test.jpg
>
> http://home.broadpark.no/~iroed/te [...] 20test.jpg
>
> http://home.broadpark.no/~iroed/te [...] 20test.jpg
>
> http://home.broadpark.no/~iroed/te [...] 20test.jpg
>
> http://home.broadpark.no/~iroed/te [...] 20test.jpg
>
> could it be the fusor? or is it someting with the imaging unit?
> the testprint is on A4 sideways.
> All advise welcome.
>
> Regards Frank
>
>

Reply to Anonymous
Anonymous   08-25-2004 at 04:40:29 PM
- 0 +

Archived from groups: comp.periphs.printers (More info?)

 

In message <412c2901@news.broadpark.no>, Frank Roed <frroed@hotmail.com>
writes
>Anyone seen this problem before:
>
>http://home.broadpark.no/~iroed/test/a4%20all%20colors%205-5%20test.jpg
>
>http://home.broadpark.no/~iroed/test/a4%20black%204-5%20test.jpg
>
>http://home.broadpark.no/~iroed/test/a4%20cyan%201-5%20test.jpg
>
>http://home.broadpark.no/~iroed/test/a4%20magenta%202-5%20test.jpg
>
>http://home.broadpark.no/~iroed/test/a4%20yellow%203-5%20test.jpg
>
>could it be the fusor? or is it someting with the imaging unit?
>the testprint is on A4 sideways.
>All advise welcome.

Are you transparencies proper colour laser ones? It might be worth
trying some proper (and doubtless more expensive) Xerox transparencies.

--
Timothy Lee http://www.wightproperty.com
tlatwightpropertydotcom

Reply to Anonymous
Andre   08-30-2004 at 07:06:00 PM
- 0 +

Archived from groups: comp.periphs.printers (More info?)

 

Look like too much oil coming from the fuser roller..

"Frank Roed" <frroed@hotmail.com> wrote in message
news:412c2901@news.broadpark.no...
> Anyone seen this problem before:
>
> http://home.broadpark.no/~iroed/te [...] 20test.jpg
>
> http://home.broadpark.no/~iroed/te [...] 20test.jpg
>
> http://home.broadpark.no/~iroed/te [...] 20test.jpg
>
> http://home.broadpark.no/~iroed/te [...] 20test.jpg
>
> http://home.broadpark.no/~iroed/te [...] 20test.jpg
>
> could it be the fusor? or is it someting with the imaging unit?
> the testprint is on A4 sideways.
> All advise welcome.
>
> Regards Frank
>
>

Reply to Andre
Anonymous   09-02-2004 at 08:32:17 AM
- 0 +

Archived from groups: comp.periphs.printers (More info?)

 

Thank's for the replyes. There is another problem also that did not show up
on the scans. the colors are unaligned in the paper movment direction.
Especially yello.

"Andre" <SaPbAoMnTnReAaPu@videotron.ca> wrote in message
news:9fJYc.45549$h56.902341@wagner.videotron.net...
> Look like too much oil coming from the fuser roller..
>
> "Frank Roed" <frroed@hotmail.com> wrote in message
> news:412c2901@news.broadpark.no...
> > Anyone seen this problem before:
> >
> > http://home.broadpark.no/~iroed/te [...] 20test.jpg
> >
> > http://home.broadpark.no/~iroed/te [...] 20test.jpg
> >
> > http://home.broadpark.no/~iroed/te [...] 20test.jpg
> >
> > http://home.broadpark.no/~iroed/te [...] 20test.jpg
> >
> > http://home.broadpark.no/~iroed/te [...] 20test.jpg
> >
> > could it be the fusor? or is it someting with the imaging unit?
> > the testprint is on A4 sideways.
> > All advise welcome.
> >
> > Regards Frank
> >
> >
>
>

Reply to Anonymous
Ask the community Add a reply
Tom's Hardware > Forum > Computer Peripherals > Printers > Tektronix Phaser 780 color printer problem
Go to:

There are 578 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.499 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them