Banding on Epson printer

Archived from groups: comp.periphs.printers (More info?)

In article <11895-4132B839-256@storefull-3216.bay.webtv.net>, Vic R
<virolo@webtv.net> writes
>I have a Stylus Epson 1270 printer which has developed horizontal
>banding when printing/ Cleaned the heads, changed carts but still it
>bands. . Any suggestions?
>Any one with similar problem. Epson tech help was no help.
>
Print a nozzle check and examine it carefully.

Are all the lines visible? If not then a nozzle is completely blocked.
Are all the lines evenly spaced. If not then a nozzle is partially
blocked and squirting squint.

In either case, if a normal head clean hasn't resolved the problem use
the Windex procedure that is often described here. Damp paper towel
with windex, move had over the cloth, leave for a couple of hours. Clean
cycle and check. You might need to apply some Windex around the park
position to clear up encrusted ink and prevent the problem recurring.

If no nozzle problems then check the print head height lever on the
right is in the correct position for the thickness of paper you are
using.
--
Kennedy
Yes, Socrates himself is particularly missed;
A lovely little thinker, but a bugger when he's pissed.
Python Philosophers (replace 'nospam' with 'kennedym' when replying)