Tom's Hardware > Forum > Computer Peripherals > Printers > Epson R300 Flashing red light

Epson R300 Flashing red light

Forum Computer Peripherals : Printers - Epson R300 Flashing red light

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Anonymous   09-03-2004 at 01:41:55 AM

Archived from groups: comp.periphs.printers (More info?)

 

I have just replaced a couple of the cartridges. Two others are low (as
indicted by the windows status monitor and the LCD) but not empty. How do I
tell this silly light to stop blinking?

Add a reply
Sponsored Links
Register or log in to remove.
Anonymous   09-03-2004 at 05:49:52 AM
- 0 +

Archived from groups: comp.periphs.printers (More info?)

 

"BigBird" <bigbird@int.net> wrote in news:2pp7siFmov31U1@uni-berlin.de:

> I have just replaced a couple of the cartridges. Two others are low
> (as indicted by the windows status monitor and the LCD) but not empty.
> How do I tell this silly light to stop blinking?
>
>

I don't think you can, its the [two others that are low]

Reply to Anonymous
Anonymous   09-03-2004 at 05:49:53 AM
- 0 +

Archived from groups: comp.periphs.printers (More info?)

 

Cover it with a piece of electric tape till you change the carts !!
"Yer Welcome" <nospam@ooo.net> wrote in message
news:Xns9558AB46997EAnospamooonet@68.6.19.6...
> "BigBird" <bigbird@int.net> wrote in news:2pp7siFmov31U1@uni-berlin.de:
>
> > I have just replaced a couple of the cartridges. Two others are low
> > (as indicted by the windows status monitor and the LCD) but not empty.
> > How do I tell this silly light to stop blinking?
> >
> >
>
> I don't think you can, its the [two others that are low]

Reply to Anonymous
Anonymous   09-04-2004 at 07:25:13 PM
- 0 +

Archived from groups: comp.periphs.printers (More info?)

 

"NCHA" <M@U.com> wrote in message news:10jfclc5bnnh2e5@corp.supernews.com...
> "Yer Welcome" <nospam@ooo.net> wrote in message
> news:Xns9558AB46997EAnospamooonet@68.6.19.6...
>> "BigBird" <bigbird@int.net> wrote in news:2pp7siFmov31U1@uni-berlin.de:
>>
>> > I have just replaced a couple of the cartridges. Two others are low
>> > (as indicted by the windows status monitor and the LCD) but not empty.
>> > How do I tell this silly light to stop blinking?
>> >
>> >
>>
>> I don't think you can, its the [two others that are low]

Oh I do hope your wrong.
I have come to the conclusion it may be the new black cartridge which is
showing as 'unknown' all the way down the status monitor. Probably not
chipped correctly or faulty chip. The 2 Jettecs show up okay.


>
> Cover it with a piece of electric tape till you change the carts !!

Might just have to.

Reply to Anonymous
Anonymous   09-05-2004 at 01:38:10 PM
- 0 +

Archived from groups: comp.periphs.printers (More info?)

 

If one cartridge chip is faulty, you could have this problem, all
chips/cartridges will be shown as unknown, unknown date, unknown
manufacturer, etc. Take care, in this situation the chips don't record the
ink level, when they recover it will show more ink than they would contain.

--
Yianni
in@mailbox9.gr (remove number nine to reply)

--
"BigBird" <bigbird@int.net> wrote in message
news:2ptqi2FpikqjU1@uni-berlin.de...
>
>
> "NCHA" <M@U.com> wrote in message
news:10jfclc5bnnh2e5@corp.supernews.com...
> > "Yer Welcome" <nospam@ooo.net> wrote in message
> > news:Xns9558AB46997EAnospamooonet@68.6.19.6...
> >> "BigBird" <bigbird@int.net> wrote in news:2pp7siFmov31U1@uni-berlin.de:
> >>
> >> > I have just replaced a couple of the cartridges. Two others are low
> >> > (as indicted by the windows status monitor and the LCD) but not
empty.
> >> > How do I tell this silly light to stop blinking?
> >> >
> >> >
> >>
> >> I don't think you can, its the [two others that are low]
>
> Oh I do hope your wrong.
> I have come to the conclusion it may be the new black cartridge which is
> showing as 'unknown' all the way down the status monitor. Probably not
> chipped correctly or faulty chip. The 2 Jettecs show up okay.
>
>
> >
> > Cover it with a piece of electric tape till you change the carts !!
>
> Might just have to.
>
>

Reply to Anonymous
rus   09-10-2004 at 07:44:19 AM
- 0 +

Archived from groups: comp.periphs.printers (More info?)

 

VGhlcmUncyBhICJmcmVlIEVwc29uIHNlcnZpY2UgdXRpbGl0eSIgYXZhaWxhYmxlIG9uIHRoZSB3
ZWIuICBJIHRoaW5rIHRoZSBhdXRob3IgaGFzIGFkZGVkIFIzMDAgc3VwcG9ydC4gIFdpdGggaXQs
IGRhbWFnZSBjb3VsZCBvY2N1ci4gIFVzZSBhdCB5b3VyIG93biByaXNrLiAgUmVhZCB0aGUgd2Vi
IHNpdGUgaW5mb3JtYXRpb24gdGhvcm91Z2hseS4gIEV4YW1pbmUgaXRzIGZ1bmN0aW9uYWxpdHkg
dGhyb3VnaCB1c2VyIGZvcnVtcyB0byBkZXRlcm1pbmUgInNhZmUiIGFuZCAicHJvcGVyIiB1c2Uu
DQoNCkkndmUgbm90IHRyaWVkIGl0LCBidXQsIEkndmUgZ290IGl0IHN0YXNoZWQgZm9yIGFuIGVt
ZXJnZW5jeS4gIEkndmUgcmVhZCBvZiBvdGhlcnMnIHN1Y2Nlc3NlcyB3aXRoIGl0Lg0KDQpTdXBw
b3NlZGx5LCB5b3UgY2FuIHJlc2V0IHRoZSAiaW5rIGNvdW50ZXIiIGluIHNvbWUgY2hpcHMuICBJ
ZiBzdWNjZXNzZnVsLCB0aGF0IGxlYXZlcyB5b3Ugd2l0aCB0aGUgcmVzcG9uc2liaWxpdHkgb2Yg
Z3Vlc3Npbmcgd2hlbiB0aGUgY2FydHMgYXJlIGFjdHVhbGx5IGVtcHR5Lg0KDQovL3J1cy8vDQoN
Cg0KIllpYW5uaSIgPGluQG1haWxib3g5LmdyPiB3cm90ZSBpbiBtZXNzYWdlIG5ld3M6MTA5NDM1
OTA5Ni4zMjk3NzdAYXRobnJkMDIuLi4NCj4gSWYgb25lIGNhcnRyaWRnZSBjaGlwIGlzIGZhdWx0
eSwgeW91IGNvdWxkIGhhdmUgdGhpcyBwcm9ibGVtLCBhbGwNCj4gY2hpcHMvY2FydHJpZGdlcyB3
aWxsIGJlIHNob3duIGFzIHVua25vd24sIHVua25vd24gZGF0ZSwgdW5rbm93bg0KPiBtYW51ZmFj
dHVyZXIsIGV0Yy4gVGFrZSBjYXJlLCBpbiB0aGlzIHNpdHVhdGlvbiB0aGUgY2hpcHMgZG9uJ3Qg
cmVjb3JkIHRoZQ0KPiBpbmsgbGV2ZWwsIHdoZW4gdGhleSByZWNvdmVyIGl0IHdpbGwgc2hvdyBt
b3JlIGluayB0aGFuIHRoZXkgd291bGQgY29udGFpbi4NCj4gDQo+IC0tDQo+IFlpYW5uaQ0KPiBp
bkBtYWlsYm94OS5nciAgIChyZW1vdmUgbnVtYmVyIG5pbmUgdG8gcmVwbHkpDQo+IA0KPiAtLQ0K
PiAiQmlnQmlyZCIgPGJpZ2JpcmRAaW50Lm5ldD4gd3JvdGUgaW4gbWVzc2FnZQ0KPiBuZXdzOjJw
dHFpMkZwaWtxalUxQHVuaS1iZXJsaW4uZGUuLi4NCj4gPg0KPiA+DQo+ID4gIk5DSEEiIDxNQFUu
Y29tPiB3cm90ZSBpbiBtZXNzYWdlDQo+IG5ld3M6MTBqZmNsYzVibm5oMmU1QGNvcnAuc3VwZXJu
ZXdzLmNvbS4uLg0KPiA+ID4gIlllciBXZWxjb21lIiA8bm9zcGFtQG9vby5uZXQ+IHdyb3RlIGlu
IG1lc3NhZ2UNCj4gPiA+IG5ld3M6WG5zOTU1OEFCNDY5OTdFQW5vc3BhbW9vb25ldEA2OC42LjE5
LjYuLi4NCj4gPiA+PiAiQmlnQmlyZCIgPGJpZ2JpcmRAaW50Lm5ldD4gd3JvdGUgaW4gbmV3czoy
cHA3c2lGbW92MzFVMUB1bmktYmVybGluLmRlOg0KPiA+ID4+DQo+ID4gPj4gPiBJIGhhdmUganVz
dCByZXBsYWNlZCBhIGNvdXBsZSBvZiB0aGUgY2FydHJpZGdlcy4gVHdvIG90aGVycyBhcmUgbG93
DQo+ID4gPj4gPiAoYXMgaW5kaWN0ZWQgYnkgdGhlIHdpbmRvd3Mgc3RhdHVzIG1vbml0b3IgYW5k
IHRoZSBMQ0QpIGJ1dCBub3QNCj4gZW1wdHkuDQo+ID4gPj4gPiBIb3cgZG8gSSB0ZWxsIHRoaXMg
c2lsbHkgbGlnaHQgdG8gc3RvcCBibGlua2luZz8NCj4gPiA+PiA+DQo+ID4gPj4gPg0KPiA+ID4+
DQo+ID4gPj4gSSBkb24ndCB0aGluayB5b3UgY2FuLCBpdHMgdGhlIFt0d28gb3RoZXJzIHRoYXQg
YXJlIGxvd10NCj4gPg0KPiA+IE9oIEkgZG8gaG9wZSB5b3VyIHdyb25nLg0KPiA+IEkgaGF2ZSBj
b21lIHRvIHRoZSBjb25jbHVzaW9uIGl0IG1heSBiZSB0aGUgbmV3IGJsYWNrIGNhcnRyaWRnZSB3
aGljaCBpcw0KPiA+IHNob3dpbmcgYXMgJ3Vua25vd24nIGFsbCB0aGUgd2F5IGRvd24gdGhlIHN0
YXR1cyBtb25pdG9yLiBQcm9iYWJseSBub3QNCj4gPiBjaGlwcGVkIGNvcnJlY3RseSBvciBmYXVs
dHkgY2hpcC4gVGhlIDIgSmV0dGVjcyBzaG93IHVwIG9rYXkuDQo+ID4NCj4gPg0KPiA+ID4NCj4g
PiA+IENvdmVyIGl0IHdpdGggYSBwaWVjZSBvZiBlbGVjdHJpYyB0YXBlIHRpbGwgIHlvdSBjaGFu
Z2UgdGhlIGNhcnRzICEhDQo+ID4NCj4gPiBNaWdodCBqdXN0IGhhdmUgdG8uDQo+ID4NCj4gPg0K
PiA=

Reply to rus
Ask the community Add a reply
Tom's Hardware > Forum > Computer Peripherals > Printers > Epson R300 Flashing red light
Go to:

There are 899 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.257 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them