Sign in with
Sign up | Sign in
Your question

Epson R200 Printer Error......

Last response: in Windows 95/98/ME
Share
May 19, 2005 4:08:53 PM

Archived from groups: microsoft.public.windowsme.general (More info?)

Hi All......

This is the error I got on startup....the usual one. And my icon in the
tray for checking the printer did not load. Not sure quite what this
is.....but hope I have it plugged in right.....the two pins keep falling out
and it is not screwed in tight.

Cheers....Heather

SPOOL32 caused an invalid page fault in
module SPOOL32.EXE at 016f:00402075.
Registers:
EAX=00000004 CS=016f EIP=00402075 EFLGS=00010283
EBX=00000000 SS=0177 ESP=0086ff84 EBP=00000000
ECX=d66eb830 DS=0177 ESI=bff6ca1e FS=32d7
EDX=bffbb490 ES=0177 EDI=bff8306c GS=0000
Bytes at CS:EIP:
ff 33 55 e8 73 f0 ff ff 89 03 e8 e4 0c 00 00 89
Stack dump:
00000000 00000004 0086ffcc 81e0124c 00000008 81dfa3a0 bff79391 00000000
81e0124c 00000008 81dfa3a0 00000007 0086ffa4 0086fdb4 ffffffff bffb1b20
Anonymous
May 19, 2005 9:20:29 PM

Archived from groups: microsoft.public.windowsme.general (More info?)

Heather,

> And my icon in
> the tray for checking the printer did not load.

Did you uncheck on of the registry entries for the printer? If so then it
could have been the tray icon. I don't have a tray icon displaying here
other than when there is a print job printing.

Not clear what you mean about two pins falling out? How are you
connecting your R200? Mine's a USB printer. The only pins I see are
where the lead from the transformer plugs in. Do you mean those pins?
--
Mike


Heather <figgs@invalid.invalid> wrote:

> Hi All......
>
> This is the error I got on startup....the usual one. And my icon in
> the tray for checking the printer did not load. Not sure quite what
> this is.....but hope I have it plugged in right.....the two pins keep
> falling out and it is not screwed in tight.
>
> Cheers....Heather
>
> SPOOL32 caused an invalid page fault in
> module SPOOL32.EXE at 016f:00402075.
> Registers:
> EAX=00000004 CS=016f EIP=00402075 EFLGS=00010283
> EBX=00000000 SS=0177 ESP=0086ff84 EBP=00000000
> ECX=d66eb830 DS=0177 ESI=bff6ca1e FS=32d7
> EDX=bffbb490 ES=0177 EDI=bff8306c GS=0000
> Bytes at CS:EIP:
> ff 33 55 e8 73 f0 ff ff 89 03 e8 e4 0c 00 00 89
> Stack dump:
> 00000000 00000004 0086ffcc 81e0124c 00000008 81dfa3a0 bff79391
> 00000000 81e0124c 00000008 81dfa3a0 00000007 0086ffa4 0086fdb4
> ffffffff bffb1b20
May 19, 2005 9:20:30 PM

Archived from groups: microsoft.public.windowsme.general (More info?)

"Mike M" <No_Spam@Corned_Beef.Only> wrote in message
news:e07pc6IXFHA.1240@TK2MSFTNGP14.phx.gbl...
> Heather,
>
> > And my icon in
> > the tray for checking the printer did not load.
>
> Did you uncheck on of the registry entries for the printer? If so then it
> could have been the tray icon. I don't have a tray icon displaying here
> other than when there is a print job printing.

Not yet......one has the HKCU ending in Startup and the other doesn't. I
have always had the printer icon in the tray. On right click, it is to
check nozzles and the like. Which entry should I take out of Startup?? The
registry one or the plain jane one.
>
> Not clear what you mean about two pins falling out? How are you
> connecting your R200? Mine's a USB printer. The only pins I see are
> where the lead from the transformer plugs in. Do you mean those pins?

Oh dear.....(G). I have such a bleepin' mess of cords behind there that I
thought it was the printer....mine is a USB connection same as yours. Have
to pull this out and figure out what the blue connection is with the two
pins in it that you screw tight. Can't seem to get it back right, but will
get Ron to come and hold stuff so I don't send the cpu crashing to the
floor.....it is on top of a 2-drawer file cabinet. Cat fur and cpu's don't
go together, lol.

This spool error was there occasionally from after the try at an XP install
by me and before I unplugged everything to take this over to Willy. So must
be something stupid with the printer......not my plugging stuff back in.

Hope this makes sense......Heather
> --
> Mike
>
>
> Heather <figgs@invalid.invalid> wrote:
>
> > Hi All......
> >
> > This is the error I got on startup....the usual one. And my icon in
> > the tray for checking the printer did not load. Not sure quite what
> > this is.....but hope I have it plugged in right.....the two pins keep
> > falling out and it is not screwed in tight.
> >
> > Cheers....Heather
> >
> > SPOOL32 caused an invalid page fault in
> > module SPOOL32.EXE at 016f:00402075.
> > Registers:
> > EAX=00000004 CS=016f EIP=00402075 EFLGS=00010283
> > EBX=00000000 SS=0177 ESP=0086ff84 EBP=00000000
> > ECX=d66eb830 DS=0177 ESI=bff6ca1e FS=32d7
> > EDX=bffbb490 ES=0177 EDI=bff8306c GS=0000
> > Bytes at CS:EIP:
> > ff 33 55 e8 73 f0 ff ff 89 03 e8 e4 0c 00 00 89
> > Stack dump:
> > 00000000 00000004 0086ffcc 81e0124c 00000008 81dfa3a0 bff79391
> > 00000000 81e0124c 00000008 81dfa3a0 00000007 0086ffa4 0086fdb4
> > ffffffff bffb1b20
>
Related resources
Anonymous
May 19, 2005 9:29:15 PM

Archived from groups: microsoft.public.windowsme.general (More info?)

> Did you uncheck on of the
Did you uncheck ONE of the ...
--
Mike


Mike M <No_Spam@Corned_Beef.Only> wrote:

> Did you uncheck on of the registry entries for the printer? If so
> then it could have been the tray icon. I don't have a tray icon
> displaying here other than when there is a print job printing.
>
> Not clear what you mean about two pins falling out? How are you
> connecting your R200? Mine's a USB printer. The only pins I see are
> where the lead from the transformer plugs in. Do you mean those pins?
Anonymous
May 19, 2005 10:42:20 PM

Archived from groups: microsoft.public.windowsme.general (More info?)

I'll try and stick my R200 on my Win Me box later but that box is
unfortunately dead in the water at the moment. Nothing to do with Win Me
but a lot to do with the PC having crashed badly when the power cord got
inadvertently pulled out a couple of days ago. It won't restart at the
moment but I just don't have the time to check it out just now but
hopefully tomorrow sometime.
--
Mike Maltby MS-MVP
mike.maltby@gmail.com


Heather <figgs@invalid.invalid> wrote:

> "Mike M" <No_Spam@Corned_Beef.Only> wrote in message
> news:e07pc6IXFHA.1240@TK2MSFTNGP14.phx.gbl...
>> Heather,
>>
>>> And my icon in
>>> the tray for checking the printer did not load.
>>
>> Did you uncheck on of the registry entries for the printer? If so
>> then it could have been the tray icon. I don't have a tray icon
>> displaying here other than when there is a print job printing.
>
> Not yet......one has the HKCU ending in Startup and the other
> doesn't. I have always had the printer icon in the tray. On right
> click, it is to check nozzles and the like. Which entry should I
> take out of Startup?? The registry one or the plain jane one.
>>
>> Not clear what you mean about two pins falling out? How are you
>> connecting your R200? Mine's a USB printer. The only pins I see are
>> where the lead from the transformer plugs in. Do you mean those
>> pins?
>
> Oh dear.....(G). I have such a bleepin' mess of cords behind there
> that I thought it was the printer....mine is a USB connection same as
> yours. Have to pull this out and figure out what the blue connection
> is with the two pins in it that you screw tight. Can't seem to get
> it back right, but will get Ron to come and hold stuff so I don't
> send the cpu crashing to the floor.....it is on top of a 2-drawer
> file cabinet. Cat fur and cpu's don't go together, lol.
>
> This spool error was there occasionally from after the try at an XP
> install by me and before I unplugged everything to take this over to
> Willy. So must be something stupid with the printer......not my
> plugging stuff back in.
>
> Hope this makes sense......Heather
May 19, 2005 10:42:21 PM

Archived from groups: microsoft.public.windowsme.general (More info?)

Hi Mike......

Not to worry. I unchecked the *plain jane one*......not the HKCU one which
is Per-User Run. The plain jane is Machine Run....which does not mean sweet
*** all to me, grin. (oops, that wasn't the word you guys thought it was,
grin) Anyway, rebooted and no error, but it doesn't happen every time.

Have to head out to another town to pick up my car, so will catch up with
you later. Tried the printer and it worked fine and I STILL have this icon
in the lower tray which says Monitoring Preferences, Check Ink, etc.

Later I will pull all the cords out from the back of the CPU and figure out
which one the blue one is but I think it is attached to a Com Port thingie.
My eyesight is no longer the greatest, so will get a magnifying glass and
double check the *teeny tiny* imprint on the CPU connection.

XX for now.....Heather
"Mike M" <No_Spam@Corned_Beef.Only> wrote in message
news:u%23nYpoJXFHA.2768@tk2msftngp13.phx.gbl...
> I'll try and stick my R200 on my Win Me box later but that box is
> unfortunately dead in the water at the moment. Nothing to do with Win Me
> but a lot to do with the PC having crashed badly when the power cord got
> inadvertently pulled out a couple of days ago. It won't restart at the
> moment but I just don't have the time to check it out just now but
> hopefully tomorrow sometime.
> --
> Mike Maltby MS-MVP
> mike.maltby@gmail.com
>
>
> Heather <figgs@invalid.invalid> wrote:
>
> > "Mike M" <No_Spam@Corned_Beef.Only> wrote in message
> > news:e07pc6IXFHA.1240@TK2MSFTNGP14.phx.gbl...
> >> Heather,
> >>
> >>> And my icon in
> >>> the tray for checking the printer did not load.
> >>
> >> Did you uncheck on of the registry entries for the printer? If so
> >> then it could have been the tray icon. I don't have a tray icon
> >> displaying here other than when there is a print job printing.
> >
> > Not yet......one has the HKCU ending in Startup and the other
> > doesn't. I have always had the printer icon in the tray. On right
> > click, it is to check nozzles and the like. Which entry should I
> > take out of Startup?? The registry one or the plain jane one.
> >>
> >> Not clear what you mean about two pins falling out? How are you
> >> connecting your R200? Mine's a USB printer. The only pins I see are
> >> where the lead from the transformer plugs in. Do you mean those
> >> pins?
> >
> > Oh dear.....(G). I have such a bleepin' mess of cords behind there
> > that I thought it was the printer....mine is a USB connection same as
> > yours. Have to pull this out and figure out what the blue connection
> > is with the two pins in it that you screw tight. Can't seem to get
> > it back right, but will get Ron to come and hold stuff so I don't
> > send the cpu crashing to the floor.....it is on top of a 2-drawer
> > file cabinet. Cat fur and cpu's don't go together, lol.
> >
> > This spool error was there occasionally from after the try at an XP
> > install by me and before I unplugged everything to take this over to
> > Willy. So must be something stupid with the printer......not my
> > plugging stuff back in.
> >
> > Hope this makes sense......Heather
>
Anonymous
May 19, 2005 11:21:30 PM

Archived from groups: microsoft.public.windowsme.general (More info?)

Heather,

I thought I had explained in a previous post that the Machine Run entry is
almost certainly an entry in
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
--
Mike Maltby MS-MVP
mike.maltby@gmail.com


Heather <figgs@invalid.invalid> wrote:

> Hi Mike......
>
> Not to worry. I unchecked the *plain jane one*......not the HKCU one
> which is Per-User Run. The plain jane is Machine Run....which does
> not mean sweet *** all to me, grin. (oops, that wasn't the word you
> guys thought it was, grin) Anyway, rebooted and no error, but it
> doesn't happen every time.
>
> Have to head out to another town to pick up my car, so will catch up
> with you later. Tried the printer and it worked fine and I STILL
> have this icon in the lower tray which says Monitoring Preferences,
> Check Ink, etc.
>
> Later I will pull all the cords out from the back of the CPU and
> figure out which one the blue one is but I think it is attached to a
> Com Port thingie. My eyesight is no longer the greatest, so will get
> a magnifying glass and double check the *teeny tiny* imprint on the
> CPU connection.
May 20, 2005 1:02:46 AM

Archived from groups: microsoft.public.windowsme.general (More info?)

OK....confused as all get out. But I ran Regedit and Epson is where you
said, but under Run- (dash after it, but not in the plain Run one) in
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run.

This is the "Registry Per-User" one in Startup.....which ends in HKCU. I
will type it out.....

Registry (Per-User Run)
C:\WINDOWS\SYSTEM\E_S4l2H1.EXE /P30 "EPSON Stylus Photo R200 Series" /M
"Stylus Photo R200" /EF "HKCU"


The one I unchecked just says the following.....
Registry (Machine Run)
C:\WINDOWS\SYSTEM\E_S4l2H1.EXE /P30 "EPSON Stylus Photo R200 Series" /05
"LPT1:" /M "Stylus Photo R200"

Sorry Mike......I don't know much about the Registry and will go back and
recheck the latter one if you think it is wise.

I have also been getting a lot of VSOM errors on shutdown and that is the
next thing to tackle. I may just reinstall both Epson and ZAPro to see if
that cures it. I am really flying blind here. I will ask my ZA questions
in another thread.

Cheers.....Heather

"Mike M" <No_Spam@Corned_Beef.Only> wrote in message
news:%23QHMQ%23JXFHA.2420@TK2MSFTNGP12.phx.gbl...
> Heather,
>
> I thought I had explained in a previous post that the Machine Run entry is
> almost certainly an entry in
> HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
> --
> Mike Maltby MS-MVP
> mike.maltby@gmail.com
>
>
> Heather <figgs@invalid.invalid> wrote:
>
> > Hi Mike......
> >
> > Not to worry. I unchecked the *plain jane one*......not the HKCU one
> > which is Per-User Run. The plain jane is Machine Run....which does
> > not mean sweet *** all to me, grin. (oops, that wasn't the word you
> > guys thought it was, grin) Anyway, rebooted and no error, but it
> > doesn't happen every time.
> >
> > Have to head out to another town to pick up my car, so will catch up
> > with you later. Tried the printer and it worked fine and I STILL
> > have this icon in the lower tray which says Monitoring Preferences,
> > Check Ink, etc.
> >
> > Later I will pull all the cords out from the back of the CPU and
> > figure out which one the blue one is but I think it is attached to a
> > Com Port thingie. My eyesight is no longer the greatest, so will get
> > a magnifying glass and double check the *teeny tiny* imprint on the
> > CPU connection.
>
Anonymous
May 20, 2005 6:23:17 AM

Archived from groups: microsoft.public.windowsme.general (More info?)

Heather,

Run- means that the item is unchecked in MSConfig.

I don't really want to comment further until I get my Win Me box up and
running and install the R200 but have to admit to being intrigued at
seeing a reference to LPT1: (that is, a parallel port) in the unchecked
HKLM entry.

It's late which is probably why I don't know what the VSOM errors are that
you mention. Perhaps you mean vsmon?

I'll try and post back later tomorrow by which time I hope I'll be able to
check out a Win me box with an R200 installed. At least some sleep might
help.

Cheers,

Mike


Heather <figgs@invalid.invalid> wrote:

> OK....confused as all get out. But I ran Regedit and Epson is where
> you said, but under Run- (dash after it, but not in the plain Run
> one) in HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run.
>
> This is the "Registry Per-User" one in Startup.....which ends in
> HKCU. I will type it out.....
>
> Registry (Per-User Run)
> C:\WINDOWS\SYSTEM\E_S4l2H1.EXE /P30 "EPSON Stylus Photo R200 Series"
> /M "Stylus Photo R200" /EF "HKCU"
>
>
> The one I unchecked just says the following.....
> Registry (Machine Run)
> C:\WINDOWS\SYSTEM\E_S4l2H1.EXE /P30 "EPSON Stylus Photo R200 Series"
> /05 "LPT1:" /M "Stylus Photo R200"
>
> Sorry Mike......I don't know much about the Registry and will go back
> and recheck the latter one if you think it is wise.
>
> I have also been getting a lot of VSOM errors on shutdown and that is
> the next thing to tackle. I may just reinstall both Epson and ZAPro
> to see if that cures it. I am really flying blind here. I will ask
> my ZA questions in another thread.
May 20, 2005 6:23:18 AM

Archived from groups: microsoft.public.windowsme.general (More info?)

Thanks, Mike.......I am now trying to digest this. Been dealing with
painters all day and stuff......my head is not into this. Have to go and
clean up the master bedroom coz it is being painted at 8:30 AM tomorrow
(ungodly hour!!).....

Of course I meant Vsmon....drat. (G) I am losing it. I know it is a ZA
error and I have some questions to ask about an upgrade. Seems I can either
use my version 4.5.594.00 with webfiltering as they are not upgrading it any
more.......OR switch to a totally free Security Suite. Blew me away!! I am
not entirely sure I want that on here......you know I usually stay at least
2 or 3 versions behind. Last one was 2.6.xxx, grin.

Talk to you tomorrow.......Heather

"Mike M" <No_Spam@Corned_Beef.Only> wrote in message
news:e6PhwpNXFHA.3716@TK2MSFTNGP12.phx.gbl...
> Heather,
>
> Run- means that the item is unchecked in MSConfig.
>
> I don't really want to comment further until I get my Win Me box up and
> running and install the R200 but have to admit to being intrigued at
> seeing a reference to LPT1: (that is, a parallel port) in the unchecked
> HKLM entry.
>
> It's late which is probably why I don't know what the VSOM errors are that
> you mention. Perhaps you mean vsmon?
>
> I'll try and post back later tomorrow by which time I hope I'll be able to
> check out a Win me box with an R200 installed. At least some sleep might
> help.
>
> Cheers,
>
> Mike
>
>
> Heather <figgs@invalid.invalid> wrote:
>
> > OK....confused as all get out. But I ran Regedit and Epson is where
> > you said, but under Run- (dash after it, but not in the plain Run
> > one) in HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run.
> >
> > This is the "Registry Per-User" one in Startup.....which ends in
> > HKCU. I will type it out.....
> >
> > Registry (Per-User Run)
> > C:\WINDOWS\SYSTEM\E_S4l2H1.EXE /P30 "EPSON Stylus Photo R200 Series"
> > /M "Stylus Photo R200" /EF "HKCU"
> >
> >
> > The one I unchecked just says the following.....
> > Registry (Machine Run)
> > C:\WINDOWS\SYSTEM\E_S4l2H1.EXE /P30 "EPSON Stylus Photo R200 Series"
> > /05 "LPT1:" /M "Stylus Photo R200"
> >
> > Sorry Mike......I don't know much about the Registry and will go back
> > and recheck the latter one if you think it is wise.
> >
> > I have also been getting a lot of VSOM errors on shutdown and that is
> > the next thing to tackle. I may just reinstall both Epson and ZAPro
> > to see if that cures it. I am really flying blind here. I will ask
> > my ZA questions in another thread.
>
Anonymous
May 20, 2005 12:45:40 PM

Archived from groups: microsoft.public.windowsme.general (More info?)

Figgs, I don't think you should be worried about running any recent version
of ZA, either under WinME or XP.
I do both here on several boxes with no problems. And both Mike and Loon
have reported that their recent possible inteference with SR By ZA was
instead due to other apps.
In any event, the ZA versions are easy to uninstall, or to use SR to revert.

While you are next behind the box, use some stringed tags from the office
supply store to label all the cables, at both ends, to make that problem go
away forever.

I don't have any Epson printers running just now, so I'll let Mike continue
to help you there.
If you guys get stuck, I can ask my daughter about her R200, under XP SP2.
She is very knowledgeable, and can easily help with the registry entries and
the Systray tool.
--
Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
Help us help you: http://www.dts-L.org/goodpost.htm
In Memorium: Alex Nichol
http://www.microsoft.com/windowsxp/expertzone/meetexper...
Your cooperation is very appreciated.
------
"Heather" <figgs@invalid.invalid> wrote in message
news:ux476HOXFHA.580@TK2MSFTNGP15.phx.gbl...
> Thanks, Mike.......I am now trying to digest this. Been dealing with
> painters all day and stuff......my head is not into this. >

<snip>
!