Sign in with
Sign up | Sign in
Your question

Got Dual Core 3800.

Last response: in Overclocking
Share
December 4, 2005 10:35:37 PM

30C right now. i ahve no idea how to begin to oc.

More about : dual core 3800

December 4, 2005 11:17:15 PM

Well....you can look at it and hope it goes up....

List all your specs, mobo, RAM, PSU, and CPU cooling
December 4, 2005 11:20:57 PM

8)
Related resources
December 4, 2005 11:46:31 PM

Um.....are you hitting on me?
December 5, 2005 1:15:53 AM

Yes, err, No! :?
December 5, 2005 1:19:11 AM

Excuse me but my eyes are up here!!!

*directs eyes away from avatar*
December 5, 2005 1:22:43 AM

:lol:  8)
December 5, 2005 10:31:12 AM

Athlon 64 Dual 3800
GIGABYTE GA-K8NF-9
1 Gig Not sure what brand, ill find that out later
Full tower case with 4 fans
250 gig harddrive
December 5, 2005 10:56:17 AM

Well you are going to go into your bios and raise your htt....but if you have crappy ram it will crap out before you raise it above 205.


My advice is look to lower your ram speed...it will be called a ram divider or something like that.....lower your ram speed as low as it will go. What this does will allow you to figure out how high your cpu will go without your crappy ram becomming a factor.

I dont feel like going through all the details.....http://www.xtremesystems.org/forums/showthread.php?t=46539 go here and read....DL the file in the first thread.

Its not hard i just dont want to type it allout.
December 6, 2005 10:38:21 AM

my RAM timings are 3-3-3-8, what do you think i can squeeze out of the oc? and would it be worth it?
December 6, 2005 10:58:27 AM

a lot of people are getting 2.8Ghz+ from good air cooling with that cpu....but your are a newbie so i would say you could get 2.4 pretty easy.

Would it be worth it? who knows? Personally i would love to know that i OC'd my 2Ghz cpu to 3Ghz....but for me it would be more braggins rights and learning then about speed.....i dont do anything that needs more then what i have now.


If you need more speed....try it, if your interested in OCing....try it....if not then dont. I dont know what will be good or bad for you.
December 7, 2005 8:27:03 PM

Over Clock is easy.. esp AMD is Easy n good Fro oc Since AMD cPu temp is cool oc in BIO Or ur Mainbord should come with Softwear that allwo u 2 control n OC ur CPu go Try.. make sure u dont oc 2 much.. make sure u dont over ur 3800+ Nor more then 2.3GHZ core clock..
JEff :) 
December 7, 2005 11:03:47 PM

Quote:
Over Clock is easy.. esp AMD is Easy n good Fro oc Since AMD cPu temp is cool oc in BIO Or ur Mainbord should come with Softwear that allwo u 2 control n OC ur CPu go Try.. make sure u dont oc 2 much.. make sure u dont over ur 3800+ Nor more then 2.3GHZ core clock..
JEff :) 


Seriuosly do you just randomly hit the shift button? TYPE EVERYTHING OUT AND DONT TALK LIKE A LITTLE FUCKING KID!!

a 3800+ can go to around 3Ghz on air cooling.....
December 8, 2005 7:22:14 PM

i oc'd it to 2.1 from 2.0. at 2.2 it wouldnt let me load windows. so what do i do? bump up vcore to 1.4?
December 8, 2005 11:19:17 PM

I would bet 1,000,000:1 its your ram.....

USE A DIVIDER!!

Check your max fsb with the ram on the lowest divider....then bring your ram up to see how high your ram can go....then figure ut the best config.
December 9, 2005 12:10:36 AM

where would i go in bios to do that? timing are 3-3-3-8 right now i think. my computer locks up at 1.375 vcore. @ 2.1 GHz OC under 4 hours of 3DMARK03 the cpu temp. is 33C. I WANT TO GO HIGHER! hehe all air cooling

I looked in Si Sandra 2005 and this is what it said...... Timing @ 200 3-3-38, Timing @ 167 2.5-3-3-7. i dont know what this means, but i thought it might be informative. Brand is SUPERT? 2x210MHz (420 data rate)

WTF? Sandra said CPU 1 is 30C and CPU 2 is 70C?? is this possible?
December 9, 2005 12:43:48 AM

Its possible but it would vbe very odd because CPU2 would HEAT UP cpu1.....


My guess is your cpus are too hot....did you bump up the vcore? if so take hat back down to stock....you shouldn't need to do that ill around 2.8Ghz.


i dont know where it is specfically because i haven't used yuor board to OC before.

Its a ram divider, a ram ratio....something like that. it will list eithe rthings like this 2:3, 3:4, 4:5, 5:6, and so on....or list things like 133, 166, 188...

Go to gygabyes forums and ask there...they will know what is called.
December 9, 2005 12:54:21 AM

some benchmark things say my cpu 1 vcore is 1.35 and cpu 2 has vcore of 2.5 or something????????
December 9, 2005 12:59:27 AM

a vcore of 2.5 is WAY TOO MUCH!

Did you flash your bis for Dual core?
December 9, 2005 3:03:09 PM

no..... dont know how
December 12, 2005 10:26:39 PM

what a nightmare... this is 1 situation I Really don't want to get into when I get my new dual core.
December 12, 2005 10:39:56 PM

Haha, its called looking before you jump. Plus cut him some slack, everyone needs to start somewhere (more specifically, needs to learn from his errors.) And now back to finals (.
!