DUN Error 777

Toggle sidebar Toggle sidebar
J

jeremy

Distinguished
Dec 31, 2007
445
0
18,780
Archived from groups: microsoft.public.windowsnt.protocol.ras,microsoft.public.win2000.ras_routing (More info?)

I was wondering if anyone knows of a timer setting for RASMAN in the
registry or somewhere so that a DUN connection will not timeout and
report Error 777. This link is going over a satellite connection with
a setup time greater then a minute for the modem to report back with
the "Connect <DATA_RATE>" string. Here is the log from RASMAN if I
make this same call just using HyperTerminal the call goes through and
I have a 20% success rate of getting a DUN connection within the one
minute timer. Any help is greatly appreciated.

Thanks
Jeremy


[908] 15:45:01:242: CreateConnection: entry=Dial-up Connection,
pbk=C:\Documents and Settings\All Users\Application
Data\Microsoft\Network\Connections\Pbk\rasphone.pbk
[908] 15:45:01:252: CreateConnection: Created new connection.
hconn=0x120000, ref=1, pConn=0xef6f8
[908] 15:45:01:252: PortOpenEx: Standard 9600 bps Modem
[908] 15:45:01:272: PortOpen (6, COM1) OpenInstances = (0)
[908] 15:45:01:272: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
1761: port 6 state chg: prev=4, new=4
[908] 15:45:01:272: PortOpenEx (6) : OpenInstances = 1
[908] 15:45:01:272: PortOpenEx: rc=0x0
[908] 15:45:01:272: AddConnectionPort: pConn=0xef6f8,
pConn->CB_Ports=1, port=6, dwSubEntry=1
[908] 15:45:01:272: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
2446: port 6 state chg: prev=4, new=0
[908] 15:45:01:272: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
2489: port 6 async reqtype chg: prev=0, new=15
[908] 15:45:01:272: Adding timeout of 120 for listen
[908] 15:45:01:272: DwSendNotification(ENTRY_CONNECTING) rc=0x00000000
[908] 15:45:01:272: Connect request on port: COM1, error code 600
[792] 15:45:01:272: OVEVT_RASMAN_ADJUST_TIMER
[792] 15:46:01:559: WorkerThread: Async work event signaled on port:
COM1
[792] 15:46:01:559: OVEVT_DEV_ASYNCOP. pOverlapped = 0xa8a68
[792] 15:46:01:559: CompleteAsyncRequest: pOverlapped=0x302b074
[792] 15:46:01:559: D:\nt\private\net\routing\ras\rasman\rasman\worker.c:
2190: port 6 async reqtype chg: prev=15, new=0
[792] 15:46:01:559: ServiceWorkRequest: Async op event 15 for port
COM1 returned 777
[908] 15:46:01:569: DwSendNotification(DISCONNECTING) returned 0x0
[908] 15:46:01:569: PortDisconnectRequest on COM1 Connection=0xef6f8
,RasmanReceiveFlags=0x0
[908] 15:46:01:569: PortDisconnectRequest: Disconnecting COM1
[908] 15:46:01:569: Disconnecting Port 0x6, reason 0
[908] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\util.c
1899: Disconnected Port 6, reason 0. rc=0x258
[908] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
2152: port 6 state chg: prev=0, new=3
[908] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
2223: port 6 async reqtype chg: prev=0, new=9
[908] 15:46:01:569: Disconnect request on port: COM1
[792] 15:46:01:569: OVEVT_RASMAN_ADJUST_TIMER
[792] 15:46:01:569: WorkerThread: Disconnect event signaled on port:
COM1
[792] 15:46:01:569: OVEVT_DEV_STATECHANGE. pOverlapped = 0xa8aa0
[792] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
3526: port 6 state chg: prev=3, new=4
[792] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
3537: port 6 async reqtype chg: prev=9, new=0
[792] 15:46:01:569: CompleteDisconnectRequest: signalling 0x4c0 for
COM1
[792] 15:46:01:569: SignalPortDisconnect: pOverlapped=0x302b058
[792] 15:46:01:569: Disconnect completed on port: COM1
[792] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\worker.c,
2082: Port 6 is not marked for autoclose
[908] 15:46:01:569: PortClose: port (6). OpenInstances = 1
[908] 15:46:01:569: SetIoCompletionPortCommon: posting last event for
port 6
[908] 15:46:01:569: Freeing the notifier list for port 6
[908] 15:46:01:569: PortClose (6). OpenInstances = 0
[908] 15:46:02:050: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
2450: port 6 async reqtype chg: prev=0, new=0
[908] 15:46:02:050: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
2453: port 6 state chg: prev=4, new=4
[908] 15:46:02:050: RemoveConnectionPort: port 6, fOwnerClose=1,
pConn=0xef6f8, pConn->CB_Ports=0

[908] 15:46:02:050: Connection not freed for 0x120000! CB_Ports=0,
CB_Ref=1
[908] 15:46:02:050: D:\nt\private\net\routing\ras\rasman\rasman\request.c,
2538: Clearing the autoclose flag for port 6
[908] 15:46:02:050: PortOpenEx: Standard 9600 bps Modem
[908] 15:46:02:050: PortOpenEx: rc=0x103
[908] 15:46:02:050: ReferenceCustomCount
[908] 15:46:02:050: ReferenceCustomCount done. 0
[908] 15:46:02:050: RefConnection: 0x120000
[908] 15:46:02:050: RefConnection: deref - freeing connection as 0
ports in this connection
[908] 15:46:02:050: DwSendNotification(ENTRY_DISCONNECTED) returnd 0x0
[908] 15:46:02:050: FreeConnection: pConn=0xef6f8
[908] 15:46:02:050: RefConnection: pConn = NULL for 0x120000
[464] 10:32:50:666: Dropping All ActiveConnections as a result of
Hibernate Event
[908] 10:37:39:279: CreateConnection: entry=Dial-up Connection,
pbk=C:\Documents and Settings\All Users\Application
Data\Microsoft\Network\Connections\Pbk\rasphone.pbk
[908] 10:37:39:279: CreateConnection: Created new connection.
hconn=0x130000, ref=1, pConn=0xef6f8
[908] 10:37:39:279: PortOpenEx: Standard 9600 bps Modem
[908] 10:37:39:289: PortOpenEx: rc=0x103
[908] 10:37:39:289: ReferenceCustomCount
[908] 10:37:39:289: ReferenceCustomCount done. 0
[908] 10:37:39:289: RefConnection: 0x130000
[908] 10:37:39:289: RefConnection: deref - freeing connection as 0
ports in this connection
[908] 10:37:39:289: DwSendNotification(ENTRY_DISCONNECTED) returnd 0x0
[908] 10:37:39:289: FreeConnection: pConn=0xef6f8
[908] 10:37:39:289: RefConnection: pConn = NULL for 0x130000
[908] 10:39:01:247: CreateConnection: entry=Dial-up Connection,
pbk=C:\Documents and Settings\All Users\Application
Data\Microsoft\Network\Connections\Pbk\rasphone.pbk
[908] 10:39:01:247: CreateConnection: Created new connection.
hconn=0x140000, ref=1, pConn=0xef6f8
[908] 10:39:01:247: PortOpenEx: Standard 9600 bps Modem
[908] 10:39:01:267: PortOpen (6, COM1) OpenInstances = (0)
[908] 10:39:01:267: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
1761: port 6 state chg: prev=4, new=4
[908] 10:39:01:267: PortOpenEx (6) : OpenInstances = 1
[908] 10:39:01:267: PortOpenEx: rc=0x0
[908] 10:39:01:267: AddConnectionPort: pConn=0xef6f8,
pConn->CB_Ports=1, port=6, dwSubEntry=1
[908] 10:39:01:277: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
2446: port 6 state chg: prev=4, new=0
[908] 10:39:01:277: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
2489: port 6 async reqtype chg: prev=0, new=15
[908] 10:39:01:277: Adding timeout of 120 for listen
[908] 10:39:01:277: DwSendNotification(ENTRY_CONNECTING) rc=0x00000000
[908] 10:39:01:277: Connect request on port: COM1, error code 600
[792] 10:39:01:277: OVEVT_RASMAN_ADJUST_TIMER
[792] 10:39:02:889: WorkerThread: Async work event signaled on port:
COM1
[792] 10:39:02:889: OVEVT_DEV_ASYNCOP. pOverlapped = 0xa8a68
[792] 10:39:02:919: CompleteAsyncRequest: pOverlapped=0xb132c
[792] 10:39:02:919: D:\nt\private\net\routing\ras\rasman\rasman\worker.c:
2190: port 6 async reqtype chg: prev=15, new=0
[792] 10:39:02:919: ServiceWorkRequest: Async op event 15 for port
COM1 returned 692
[792] 10:39:02:919: WorkerThread: Disconnect event signaled on port:
COM1
[792] 10:39:02:919: OVEVT_DEV_STATECHANGE. pOverlapped = 0xa8aa0
[792] 10:39:02:919: D:\nt\private\net\routing\ras\rasman\rasman\worker.c,
1803: Disconnecting port 6, connection 0xef6f8, reason 2
[792] 10:39:02:919: Disconnecting Port 0x6, reason 2
[792] 10:39:02:919: 10. Throwing away handle 0xffffffff!
[792] 10:39:02:919: D:\nt\private\net\routing\ras\rasman\rasman\util.c,
1885:Setting port 6 for autoclosure...
[792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\util.c
1899: Disconnected Port 6, reason 2. rc=0x0
[792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
2152: port 6 state chg: prev=0, new=3
[792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
2168: port 6 state chg: prev=3, new=4
[792] 10:39:02:949: 5. Notifying of disconnect on port 6
[792] 10:39:02:949: SignalPortDisconnect: pOverlapped=0xb1310
[792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
2280: port 6 async reqtype chg: prev=0, new=0
[792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\util.c,
2313: Autoclosing port 6
[792] 10:39:02:949: PortClose: port (6). OpenInstances = 1
[792] 10:39:02:949: SetIoCompletionPortCommon: posting last event for
port 6
[792] 10:39:02:949: Freeing the notifier list for port 6
[792] 10:39:02:949: PortClose (6). OpenInstances = 0
[792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
2450: port 6 async reqtype chg: prev=0, new=0
[792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
2453: port 6 state chg: prev=4, new=4
[792] 10:39:02:949: RemoveConnectionPort: port 6, fOwnerClose=0,
pConn=0xef6f8, pConn->CB_Ports=0

[792] 10:39:02:959: SendSensNotification(_RAS_DISCONNECT) for
0x00140000 returns 0x00000000
[792] 10:39:02:959: DwSendNotification(ENTRY_DISCONNECTED) rc=0x0
[792] 10:39:02:959: RemoveConnectionPort: FreeConnection
hconn=0x140000, pconn=0xef6f8
[792] 10:39:02:959: FreeConnection: pConn=0xef6f8
[792] 10:39:02:959: D:\nt\private\net\routing\ras\rasman\rasman\request.c,
2538: Clearing the autoclose flag for port 6
[792] 10:39:02:959: DisconnectPort Complete
[792] 10:39:02:959: D:\nt\private\net\routing\ras\rasman\rasman\worker.c:
1829: port 6 state chg: prev=4, new=4
[792] 10:39:02:959: D:\nt\private\net\routing\ras\rasman\rasman\worker.c:
1833: port 6 async reqtype chg: prev=0, new=0
[908] 10:39:02:959: PortDisconnectRequest on COM1 Connection=0x0
,RasmanReceiveFlags=0x0
[908] 10:39:02:959: PortDisconnectRequest: Disconnecting COM1
[908] 10:39:02:959: Disconnecting Port 0x6, reason 0
[908] 10:39:02:959: 4. Notifying of disconnect on port 6
[908] 10:39:02:959: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
3526: port 6 state chg: prev=4, new=4
[908] 10:39:02:959: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
3537: port 6 async reqtype chg: prev=0, new=0
[908] 10:39:02:959: CompleteDisconnectRequest: signalling 0x760 for
COM1
[908] 10:39:02:959: Disconnect completed on port: COM1
[908] 10:39:02:959: Disconnect request on port: COM1
[908] 10:39:02:959: PortClose: port (6). OpenInstances = 0
[908] 10:39:02:959: PortOpenEx: Standard 9600 bps Modem
[908] 10:39:02:959: PortOpenEx: rc=0x103
[908] 10:39:02:959: ReferenceCustomCount
[908] 10:39:02:959: ReferenceCustomCount done. 668
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsnt.protocol.ras,microsoft.public.win2000.ras_routing (More info?)

Check out the KB help at:
http://support.microsoft.com/default.aspx?scid=kb;en-us;318009

--
- Manjari
This posting is provided "AS IS" with no warranties, and confers no rights.
"Jeremy" <j3r3myl33@hotmail.com> wrote in message
news:120aaed.0404150818.56e57e18@posting.google.com...
> I was wondering if anyone knows of a timer setting for RASMAN in the
> registry or somewhere so that a DUN connection will not timeout and
> report Error 777. This link is going over a satellite connection with
> a setup time greater then a minute for the modem to report back with
> the "Connect <DATA_RATE>" string. Here is the log from RASMAN if I
> make this same call just using HyperTerminal the call goes through and
> I have a 20% success rate of getting a DUN connection within the one
> minute timer. Any help is greatly appreciated.
>
> Thanks
> Jeremy
>
>
> [908] 15:45:01:242: CreateConnection: entry=Dial-up Connection,
> pbk=C:\Documents and Settings\All Users\Application
> Data\Microsoft\Network\Connections\Pbk\rasphone.pbk
> [908] 15:45:01:252: CreateConnection: Created new connection.
> hconn=0x120000, ref=1, pConn=0xef6f8
> [908] 15:45:01:252: PortOpenEx: Standard 9600 bps Modem
> [908] 15:45:01:272: PortOpen (6, COM1) OpenInstances = (0)
> [908] 15:45:01:272: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
> 1761: port 6 state chg: prev=4, new=4
> [908] 15:45:01:272: PortOpenEx (6) : OpenInstances = 1
> [908] 15:45:01:272: PortOpenEx: rc=0x0
> [908] 15:45:01:272: AddConnectionPort: pConn=0xef6f8,
> pConn->CB_Ports=1, port=6, dwSubEntry=1
> [908] 15:45:01:272: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
> 2446: port 6 state chg: prev=4, new=0
> [908] 15:45:01:272: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
> 2489: port 6 async reqtype chg: prev=0, new=15
> [908] 15:45:01:272: Adding timeout of 120 for listen
> [908] 15:45:01:272: DwSendNotification(ENTRY_CONNECTING) rc=0x00000000
> [908] 15:45:01:272: Connect request on port: COM1, error code 600
> [792] 15:45:01:272: OVEVT_RASMAN_ADJUST_TIMER
> [792] 15:46:01:559: WorkerThread: Async work event signaled on port:
> COM1
> [792] 15:46:01:559: OVEVT_DEV_ASYNCOP. pOverlapped = 0xa8a68
> [792] 15:46:01:559: CompleteAsyncRequest: pOverlapped=0x302b074
> [792] 15:46:01:559: D:\nt\private\net\routing\ras\rasman\rasman\worker.c:
> 2190: port 6 async reqtype chg: prev=15, new=0
> [792] 15:46:01:559: ServiceWorkRequest: Async op event 15 for port
> COM1 returned 777
> [908] 15:46:01:569: DwSendNotification(DISCONNECTING) returned 0x0
> [908] 15:46:01:569: PortDisconnectRequest on COM1 Connection=0xef6f8
> ,RasmanReceiveFlags=0x0
> [908] 15:46:01:569: PortDisconnectRequest: Disconnecting COM1
> [908] 15:46:01:569: Disconnecting Port 0x6, reason 0
> [908] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\util.c
> 1899: Disconnected Port 6, reason 0. rc=0x258
> [908] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
> 2152: port 6 state chg: prev=0, new=3
> [908] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
> 2223: port 6 async reqtype chg: prev=0, new=9
> [908] 15:46:01:569: Disconnect request on port: COM1
> [792] 15:46:01:569: OVEVT_RASMAN_ADJUST_TIMER
> [792] 15:46:01:569: WorkerThread: Disconnect event signaled on port:
> COM1
> [792] 15:46:01:569: OVEVT_DEV_STATECHANGE. pOverlapped = 0xa8aa0
> [792] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
> 3526: port 6 state chg: prev=3, new=4
> [792] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
> 3537: port 6 async reqtype chg: prev=9, new=0
> [792] 15:46:01:569: CompleteDisconnectRequest: signalling 0x4c0 for
> COM1
> [792] 15:46:01:569: SignalPortDisconnect: pOverlapped=0x302b058
> [792] 15:46:01:569: Disconnect completed on port: COM1
> [792] 15:46:01:569: D:\nt\private\net\routing\ras\rasman\rasman\worker.c,
> 2082: Port 6 is not marked for autoclose
> [908] 15:46:01:569: PortClose: port (6). OpenInstances = 1
> [908] 15:46:01:569: SetIoCompletionPortCommon: posting last event for
> port 6
> [908] 15:46:01:569: Freeing the notifier list for port 6
> [908] 15:46:01:569: PortClose (6). OpenInstances = 0
> [908] 15:46:02:050: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
> 2450: port 6 async reqtype chg: prev=0, new=0
> [908] 15:46:02:050: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
> 2453: port 6 state chg: prev=4, new=4
> [908] 15:46:02:050: RemoveConnectionPort: port 6, fOwnerClose=1,
> pConn=0xef6f8, pConn->CB_Ports=0
>
> [908] 15:46:02:050: Connection not freed for 0x120000! CB_Ports=0,
> CB_Ref=1
> [908] 15:46:02:050: D:\nt\private\net\routing\ras\rasman\rasman\request.c,
> 2538: Clearing the autoclose flag for port 6
> [908] 15:46:02:050: PortOpenEx: Standard 9600 bps Modem
> [908] 15:46:02:050: PortOpenEx: rc=0x103
> [908] 15:46:02:050: ReferenceCustomCount
> [908] 15:46:02:050: ReferenceCustomCount done. 0
> [908] 15:46:02:050: RefConnection: 0x120000
> [908] 15:46:02:050: RefConnection: deref - freeing connection as 0
> ports in this connection
> [908] 15:46:02:050: DwSendNotification(ENTRY_DISCONNECTED) returnd 0x0
> [908] 15:46:02:050: FreeConnection: pConn=0xef6f8
> [908] 15:46:02:050: RefConnection: pConn = NULL for 0x120000
> [464] 10:32:50:666: Dropping All ActiveConnections as a result of
> Hibernate Event
> [908] 10:37:39:279: CreateConnection: entry=Dial-up Connection,
> pbk=C:\Documents and Settings\All Users\Application
> Data\Microsoft\Network\Connections\Pbk\rasphone.pbk
> [908] 10:37:39:279: CreateConnection: Created new connection.
> hconn=0x130000, ref=1, pConn=0xef6f8
> [908] 10:37:39:279: PortOpenEx: Standard 9600 bps Modem
> [908] 10:37:39:289: PortOpenEx: rc=0x103
> [908] 10:37:39:289: ReferenceCustomCount
> [908] 10:37:39:289: ReferenceCustomCount done. 0
> [908] 10:37:39:289: RefConnection: 0x130000
> [908] 10:37:39:289: RefConnection: deref - freeing connection as 0
> ports in this connection
> [908] 10:37:39:289: DwSendNotification(ENTRY_DISCONNECTED) returnd 0x0
> [908] 10:37:39:289: FreeConnection: pConn=0xef6f8
> [908] 10:37:39:289: RefConnection: pConn = NULL for 0x130000
> [908] 10:39:01:247: CreateConnection: entry=Dial-up Connection,
> pbk=C:\Documents and Settings\All Users\Application
> Data\Microsoft\Network\Connections\Pbk\rasphone.pbk
> [908] 10:39:01:247: CreateConnection: Created new connection.
> hconn=0x140000, ref=1, pConn=0xef6f8
> [908] 10:39:01:247: PortOpenEx: Standard 9600 bps Modem
> [908] 10:39:01:267: PortOpen (6, COM1) OpenInstances = (0)
> [908] 10:39:01:267: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
> 1761: port 6 state chg: prev=4, new=4
> [908] 10:39:01:267: PortOpenEx (6) : OpenInstances = 1
> [908] 10:39:01:267: PortOpenEx: rc=0x0
> [908] 10:39:01:267: AddConnectionPort: pConn=0xef6f8,
> pConn->CB_Ports=1, port=6, dwSubEntry=1
> [908] 10:39:01:277: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
> 2446: port 6 state chg: prev=4, new=0
> [908] 10:39:01:277: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
> 2489: port 6 async reqtype chg: prev=0, new=15
> [908] 10:39:01:277: Adding timeout of 120 for listen
> [908] 10:39:01:277: DwSendNotification(ENTRY_CONNECTING) rc=0x00000000
> [908] 10:39:01:277: Connect request on port: COM1, error code 600
> [792] 10:39:01:277: OVEVT_RASMAN_ADJUST_TIMER
> [792] 10:39:02:889: WorkerThread: Async work event signaled on port:
> COM1
> [792] 10:39:02:889: OVEVT_DEV_ASYNCOP. pOverlapped = 0xa8a68
> [792] 10:39:02:919: CompleteAsyncRequest: pOverlapped=0xb132c
> [792] 10:39:02:919: D:\nt\private\net\routing\ras\rasman\rasman\worker.c:
> 2190: port 6 async reqtype chg: prev=15, new=0
> [792] 10:39:02:919: ServiceWorkRequest: Async op event 15 for port
> COM1 returned 692
> [792] 10:39:02:919: WorkerThread: Disconnect event signaled on port:
> COM1
> [792] 10:39:02:919: OVEVT_DEV_STATECHANGE. pOverlapped = 0xa8aa0
> [792] 10:39:02:919: D:\nt\private\net\routing\ras\rasman\rasman\worker.c,
> 1803: Disconnecting port 6, connection 0xef6f8, reason 2
> [792] 10:39:02:919: Disconnecting Port 0x6, reason 2
> [792] 10:39:02:919: 10. Throwing away handle 0xffffffff!
> [792] 10:39:02:919: D:\nt\private\net\routing\ras\rasman\rasman\util.c,
> 1885:Setting port 6 for autoclosure...
> [792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\util.c
> 1899: Disconnected Port 6, reason 2. rc=0x0
> [792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
> 2152: port 6 state chg: prev=0, new=3
> [792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
> 2168: port 6 state chg: prev=3, new=4
> [792] 10:39:02:949: 5. Notifying of disconnect on port 6
> [792] 10:39:02:949: SignalPortDisconnect: pOverlapped=0xb1310
> [792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\util.c:
> 2280: port 6 async reqtype chg: prev=0, new=0
> [792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\util.c,
> 2313: Autoclosing port 6
> [792] 10:39:02:949: PortClose: port (6). OpenInstances = 1
> [792] 10:39:02:949: SetIoCompletionPortCommon: posting last event for
> port 6
> [792] 10:39:02:949: Freeing the notifier list for port 6
> [792] 10:39:02:949: PortClose (6). OpenInstances = 0
> [792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
> 2450: port 6 async reqtype chg: prev=0, new=0
> [792] 10:39:02:949: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
> 2453: port 6 state chg: prev=4, new=4
> [792] 10:39:02:949: RemoveConnectionPort: port 6, fOwnerClose=0,
> pConn=0xef6f8, pConn->CB_Ports=0
>
> [792] 10:39:02:959: SendSensNotification(_RAS_DISCONNECT) for
> 0x00140000 returns 0x00000000
> [792] 10:39:02:959: DwSendNotification(ENTRY_DISCONNECTED) rc=0x0
> [792] 10:39:02:959: RemoveConnectionPort: FreeConnection
> hconn=0x140000, pconn=0xef6f8
> [792] 10:39:02:959: FreeConnection: pConn=0xef6f8
> [792] 10:39:02:959: D:\nt\private\net\routing\ras\rasman\rasman\request.c,
> 2538: Clearing the autoclose flag for port 6
> [792] 10:39:02:959: DisconnectPort Complete
> [792] 10:39:02:959: D:\nt\private\net\routing\ras\rasman\rasman\worker.c:
> 1829: port 6 state chg: prev=4, new=4
> [792] 10:39:02:959: D:\nt\private\net\routing\ras\rasman\rasman\worker.c:
> 1833: port 6 async reqtype chg: prev=0, new=0
> [908] 10:39:02:959: PortDisconnectRequest on COM1 Connection=0x0
> ,RasmanReceiveFlags=0x0
> [908] 10:39:02:959: PortDisconnectRequest: Disconnecting COM1
> [908] 10:39:02:959: Disconnecting Port 0x6, reason 0
> [908] 10:39:02:959: 4. Notifying of disconnect on port 6
> [908] 10:39:02:959: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
> 3526: port 6 state chg: prev=4, new=4
> [908] 10:39:02:959: D:\nt\private\net\routing\ras\rasman\rasman\request.c:
> 3537: port 6 async reqtype chg: prev=0, new=0
> [908] 10:39:02:959: CompleteDisconnectRequest: signalling 0x760 for
> COM1
> [908] 10:39:02:959: Disconnect completed on port: COM1
> [908] 10:39:02:959: Disconnect request on port: COM1
> [908] 10:39:02:959: PortClose: port (6). OpenInstances = 0
> [908] 10:39:02:959: PortOpenEx: Standard 9600 bps Modem
> [908] 10:39:02:959: PortOpenEx: rc=0x103
> [908] 10:39:02:959: ReferenceCustomCount
> [908] 10:39:02:959: ReferenceCustomCount done. 668
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom