Micro SW

[Joeri]

I've bought myself a Thermaltake Kandalf and the problem is that I can't find the micro SW connector on my motherboard. I've also checked the manual from the case and it refers me to the mobo manual. I've also searched there but no sign of a micro SW connector.

My mobo: Gigabyte GA-K8NXP-SLI.


Does anybody have any idea where to put it?

 

[ChipDeath]

Which connector? Some cases come with a power, reset, and 'sleep' switch. Not that many mobos have connectors for all three, so you may just have to connect power and reset...

Or are you talking about something else? Could you be a bit more specific?

 

[Joeri]

Hehe,

the micro sw is the connector which alarms if the case is open.

 

[ChipDeath]

If you can't find it in the mobo manual, then your board probably doesn't support it. No biggie. Most of mine haven't had that header IIRC.

 

[Crashman]

Look on the board for a jumpered header with only two pins. If you find it, confirm its function in the manual. These things are always 2-pin and jumpered by the factory, if present.