RRAS, Router DI-304

[Mik]

Archived from groups: microsoft.public.windowsnt.protocol.tcpip (More info?)

I have two LANs. One is with Win NT server and second with Win2k3.

Both have RRAS (modem and VPN dial in) and D-Link DI-304 Routers for
Internet connection share.

Clients use DI-304 for connections to internet.

This Router can be used like dial in server also for LAN-LAN networking.

When I dial in with ISDN modem, on Win NT network I can only ping the router
and on Win2k3 I can not ping anything.

What could be reason that I can't ping the whole network?

I get IP address from router in the same subnet.

When I dial in to RRAS on Win NT or Win2k3 everything is OK.



THANKS IN ADDVANCE

 

[Guest]

Archived from groups: microsoft.public.windowsnt.protocol.tcpip (More info?)

clarification: when you dial in using ISDN. You still dial in to RRAS server
right? I didn;t get what you mean when you say you can dial-in to RRAS
server and have no problems , however dialing -in via ISDN is having issues.

To trouble shoot such issues generally do following steps
1) Use tracert -d to see which machine is dropping the packets.
2) Go to that machine and see if you can access the resource from there.
3) If no, then you have found the problem
4) If yes, then this might be routing issue and use network monitor on both
the interfaces to analyze exactly where is the problem and then debug
further to find why routing is not happening.

here's pointers for troubleshooting RRAS problems
http://www.microsoft.com/windows2000/en/server/help/sag_rras-ch5.htm?id=2679
http://www.microsoft.com/windows2000/en/server/help/sag_RRAS-Ch1_68.htm?id=2864


Hope it helps
-Pawan

--
-------------------------------------------------------------------------
"This posting is provided "AS IS" with no warranties, and confers no
rights."
------------------------------------------------------------------------

"mik" <marijan.pranjic@zg.htnet.hr> wrote in message
news:c536nd$pej$1@garrison.globalnet.hr...
> I have two LANs. One is with Win NT server and second with Win2k3.
>
> Both have RRAS (modem and VPN dial in) and D-Link DI-304 Routers for
> Internet connection share.
>
> Clients use DI-304 for connections to internet.
>
> This Router can be used like dial in server also for LAN-LAN networking.
>
> When I dial in with ISDN modem, on Win NT network I can only ping the
router
> and on Win2k3 I can not ping anything.
>
> What could be reason that I can't ping the whole network?
>
> I get IP address from router in the same subnet.
>
> When I dial in to RRAS on Win NT or Win2k3 everything is OK.
>
>
>
> THANKS IN ADDVANCE
>
>