Subnet/Webserver Question

[Guest]

Archived from groups: microsoft.public.windowsnt.protocol.tcpip (More info?)

Hi,

I have a network with a netopia R910 router (10.0.0.1)
domain controller w2k 10.0.0.2
workstations that are 10.0.0.12 and higher with subnet masks of
255.255.255.0
I would like to put a webserver on this network on a separate subnet. The
router supports up to 8 subnets, so I have added 10.1.1.1 as the gateway and
clients 10.1.1.0-10.1.1.254. How can I get the computers on 10.0.0.1 subnet
to access this webserver on 10.1.1.1 subnet? do I have to route each
machine separately using the route cmd from dos or should I add static
routes? I have also created the subnet on the win2k box ... not sure if
that's correct.

Any ideas would be appreciated.

 

[Guest]

Archived from groups: microsoft.public.windowsnt.protocol.tcpip (More info?)

In article <O6zTbSeZEHA.996@TK2MSFTNGP12.phx.gbl>,
bashton <swoobah@hotmail.com> wrote:
> ...
>I would like to put a webserver on this network on a separate subnet.
>The router supports up to 8 subnets, so I have added 10.1.1.1 as the
>gateway and clients 10.1.1.0-10.1.1.254. How can I get the computers
>on 10.0.0.1 subnet to access this webserver on 10.1.1.1 subnet? do I
>have to route each machine separately using the route cmd from dos or
>should I add static routes? ...

Have DHCP set the hosts gateway to the IP of the router.

--
-- Rod --
rodd(at)polylogics(dot)com