Cannot boot up

Archived from groups: microsoft.public.windowsnt.setup (More info?)

Disconnect all power. Set the CMOS jumper to CLEAR and
wait a few minutes, then return the jumper to NORMAL.
Resetup the BIOS settings.
If the problem doesn't go away either:
1) Replace the CMOS battery with a new one.
2) Recreate the Boot record or MBR or recopy the NTLDR
(you can check this by using a Windows NT formatted boot
diskette, if the machine boots from the floppy it's a
corrupted boot record, MBR, or NTLDR file on the hard
drive.)
3) Remove systematically PCI cards and other devices which
may be causing a DMI resource conflict or are not
functioning.


>-----Original Message-----
>hi, everyone
>
>i have a box nt 4.0 sp6 with the following scsi hard disk
with partition
>
>c drive 2gb
>d drive 7gb
>e drive 9gb
>f drive 35gb
>
>last friday, i restart the server and then it cannot go
back the windows.
>the screen is shown as verifying the DMI.....
>
>please help
>
>thanks
>jimmy
>
>
>.
>