Tom's Hardware > Forum > Homebuilt Systems > General Homebuilt > What is wrong

What is wrong

Forum Homebuilt Systems : General Homebuilt - What is wrong

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!

Ask the community Add a reply

Bottom Search this thread

I've put this togeter:

-Abit AN8 SLI Fatality MOB
-EVGA|GF 7800GT 256-P2-N515 Graphics Card
-Corsair 1Gx2 TWINX2048 Memory
-AMD Athlon 64 3700+ Processor (San Diego)
-Powered by Antec TRUEPOWERII TPII-550 ATX12V 550W Power Supply

I put this together in an old HP case with the original Hard Drive.

Here is my problem, when I power it everything seems to function but I get no signal on my monitor . I can't configure the MOB without the monitor. I have tried removing the graphics card and putting it back in with no results. Im I missing something?

Add a reply

Try reseating the RAM and CPU. Sometimes, that's a problem or makes sure that the RAM is in slot 0 and 1. ALso check any PCI cards. Sometimes BUSmaster slots don't like nonbusmater cards.

Reply to BaronMatrix

Ok, got it going.

Thanks for the suggestions.

Reply to sapulido

Ask the community Add a reply

Tom's Hardware > Forum > Homebuilt Systems > General Homebuilt > What is wrong

Go to:

Help |
Forum rules

There are 1331 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.236 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel

Focus On

What is wrong

Forum Homebuilt Systems : General Homebuilt - What is wrong

Please mind