Archived from groups: microsoft.public.windowsnt.setup (
More info?)
i do not think it can happen due deleted files. Bootstrap loader code of NT
formatted system is looking for NTLDR. so there is no chance to get message
in title. This message is produced by MSDOS.SYS file and to load it you need
to invoke MSDOS bootstrap loder code. So either you are booting from
different partition (or disk) or boot sector of your system partition was
overwritten by MS-DOS version or there is system.ini set to load
automatically incorrectly installed MS-DOS instance. For ex. system.ini like
the one bellow will try to start nonNT based OS with bootstrap loder code in
file C:\BOOTSECT.DOS (usually incomplete MS-DOS instance used to prepare
disk before run of NT setup).
[boot loader]
timeout=30
default=C:\
[operating systems]
C:\="MS-DOS"
if you have ERD, even old one, it may be worth to try to invoke "Inspect
startup environment" and "Inspect boot sector" options from NT Setup Repair
menu. But in NO CASE use option to check and repair files, this option will
mess up your OS instance to irrepairable state!!!
"alan fluhrer" <alanfluhrer@discussions.microsoft.com> pí¹e v diskusním
pøíspìvku news:7375415F-E982-44B1-932B-9AA76A9C7AED@microsoft.com...
> I just git in after I ran the dell diagnostics. It came back with no
errors
> at all. I think I may, may have accidently deted something when I thought
I
> was deleting my old data files. So I may have deleted a start up file. I
will
> try the advice given. I will write back to this group shortly I am sure
>
> thanks
>
> ALan
>
> "Jiri Tuma" wrote:
>
> > there is not "starting ms-dos" message in NT OS boot sequence, so your
boot
> > environment is not correct (at least).
> >
> > If you can, make image backup of all drives before you try to do any
> > changes.
> >
> > To check:
> > 1. boot sequence and boot related settings in both MB and SCSI BIOSes.
Check
> > what disk controller is primary and what disk on it is set to be
bootable,
> > be also sure you are not booting from floppy or CD drive. It is possible
> > your CMOS memory lost settings due power failure (bad CMOS accumulator
can
> > have similar effect) and is using default settings (usually autodetect)
and
> > is trying to boot from different drive than expected.
> >
> > 2. Try to boot from NT boot floppy to avoid NT loader related failures.
> > However, creating of such floppy for unbootable system is not always
easy.
> > Boot floppy you can get, if you format any floppy under NT based OS and
copy
> > NTLDR., NTDETECT.COM, BOOT:INI and, if exist, also NTBOOTDD.SYS files to
> > this floppy. The problem is that BOOT.INI and NTBOOTDD.SYS are specific
to
> > given system and manual creation of them can be hard. Better if you pick
> > them from running system or from any system backup (better from any
backup
> > made before last server succesfull reboot). If you need to create them
> > manually, NTBOOTDD.SYS is renamed disk controller driver and is used
only in
> > case you are using SCSI notation in boot.ini file. BOOT.INI file is text
> > file similar to following:
> >
> > [boot loader]
> > timeout=30
> > default=multi(0)disk(0)rdisk(0)partition(2)\WINNT
> > [operating systems]
> > multi(0)disk(0)rdisk(0)partition(1)\WINNT="NT based OS default location
> > using BIOS services"
> > scsi(0)disk(0)rdisk(0)partition(1)\WINNT="NT based OS default location
using
> > SCSI driver"
> > multi(0)disk(0)rdisk(0)partition(2)\WINNT="Microsoft Windows 2000 ..."
> > /fastdetect
> > scsi(0)disk(0)rdisk(0)partition(4)\WINNT="Windows NT ... 4.00"
> > scsi(0)disk(0)rdisk(0)partition(4)\WINNT="Windows NT ... 4.00 [VGA]"
> > /basevideo /sos
> > C:\="MS-DOS"
> > C:\BOOTSECT.LIN="Linux"
> >
> > To make it manually, you need to know exact location of your system from
> > disk controller point of view. Usually you can use generic line (first
in
> > Operating system section) as it is location that is used in case you let
NT
> > setup to use default settings. On some SCSI systems you need to use
SCSI()
> > notation, because they are not able to load using multi(). This part
left
> > from equal sign is nothing more then partition pointer followed by path
to
> > main OS folder. Partion is given by four numbers - number of controller
(but
> > practically all controller drivers see their controller as first, ie.
0),
> > number of disk connected to this controller (in physical order starting
from
> > 0) and partition number on given disk in MS standard drive lettering
order
> > ie. primary partitions first then logical disks (partition numbers start
> > from 1). There is difference between multi() and scsi() notation. Multi
> > notation is using rdisk() parameter for disk number and while Scsi()
> > notation is using disk() parameter as id of target disk and rdisk() as
LUN
> > of primary system disk (usually 0).
> >
> > Booting from incorrect line will end with "inaccessible boot device"
error
> > message coming from NT loader module. It is possible to use different
disk
> > drivers for NT loader and NT kernel, but they should to use the same
arc()
> > path for both system and boot partitions.
> >
> >
> > "alan fluhrer" <alanfluhrer@discussions.microsoft.com> pí1e v diskusním
> > poíspivku news:6A3AC850-7627-42D1-815C-AE6BEEEE8E7E@microsoft.com...
> > > I don't know what happened. Regardin gprevios posts, I have not
deleted
> > any
> > > files yet to make room for things.
> > >
> > > Here's my system
> > >
> > > Dell pawer edge 2400
> > > Running NT Exchange Seerver 4.0 in conjunction with SMall Business
server
> > 5.5
> > >
> > > 3 disk drives, scsi raid
> > > c: only has 45mg of space left
> > >
> > > I was reading a post wheere
> > >
> > > d; and e; drive have 7 and or 12 gig of free space each respectively.
> > >
> > > I read a post where Jiri Tuma suggested to anotehr person to re
install
> > > exchange on a different drive then "get" the files I need off of the c
> > drive.
> > > This may be an option.
> > >
> > > Here's a question related to this.
> > >
> > > Can I
> > >
> > > 1. create an OS set up on the D or F drive. then use it to get my
exchange
> > > mail off. My big question here is....will I risk losing the data
already
> > on
> > > the drive I want to point to
> > >
> > > thanks a lot in advance
> > >
> > > ALan
> > >
> > >
> > >
> >
> >
> >