I'm Getting Weird Temprature Readings

[YO_KID37]

I got a Overclocked AMD 1700+ running at 1663Mhz for a few months now, but the average tempratures was 'Mobo/CPU` 32/35*C suspended and 33/44*C at Play with 2 Case fans blowing in, and Power Supply blowing out. But when i reset the 2 Case fans to to blow all out, and i have no front fan so its like sucking on a straw with lotta small holes. But now i get a 30/51*C reading suspended and a 33/35*C reading when under high stress. it's like the system gets cooler the more it works and heats up to 60*C when suspended mode :?: :?:

 

[Ned_Flanders]

Could be a bug in your BIOS...update to the latest revision.

 

[YO_KID37]

Thanks for the remind on the BIOS update, but it made no difference. I still get the same readings. but i updated my AGP drive and everything else i found on my computer that could be updated, my graphics run slightly better but still get screwed after the CPU and case heat overheats the graphic card it a Geforce2 MX 200/400 32MB overclocked. thanks anyways Flanders

 

[YO_KID37]

It Gave the same type of reading, i got 32/51*C this time, seems like the temprature was 2 to 3 degrees higher than previously said by Freshdiagnose and a few other temprature checking programs. i guess when i need a new computer i'll just need to make myself a good circulating Case and get some 120mm in the side and 2 80mm 500rpm nes and some copper heat sinks for Rams and CPU

 

[apache_lives]

what do you mean suspended as in the power mode? if so dont use it.

 

[YO_KID37]

It's Ok I think I found What the Problem Is, The guy who set up my Processer Was such a cheap skate, he only put 3 pindrops of silicone HeatSink Thermal Paste so that is why it's probbly creating a hot air bubble while the computer is idle, i'm going to clean that cheap chinese stuff and replace it with some ArticSilver Thermal paste. that might bring it down to a normal reading, that's why my computer keeps getting lopsided reading becuse the senser has been getting the hot bubble readings.