Can't VPN using WIFI please help!

Archived from groups: comp.dcom.vpn (More info?)

Hi,

At home I am behind a Lynksys Router, 802.11b. I am trying to use a Symantec
VPN client to connect to the network at my office and I'd like to be able to
use my WIFI but I can't get it to work.

I am able to use the router/VPN client combination to connect if I use
ethernet instead of WIFI. So there is something about the Symantec
client/WIFI combination that is causing a problem. When I compare the WIFI
vs Ethernet connect log files, they are identical up to the where I get the
error:

"400 Symantec Enterprise VPN Client Error: Communications with the ISAKMP
daemon failed."

Below is the complete log for the WIFI attempt.

Any help greatly appreciated. TIA

Jul 03 11:19:12.799 esquire kernel: 120 AXTVPN Info: Raptor VPN Device
Driver V1.2.10
Jul 03 11:19:12.849 esquire kernel: 120 AXTVPN Info: Processor Count: 1.
Jul 03 11:19:12.899 esquire kernel: 301 Internal warning: TCP session
[state: 2, inactive for 44 seconds] between XXX.XX.XXX.XXX/80 and
192.168.1.104/1095 timed out due to inactivity
Jul 03 11:19:12.899 esquire kernel: 301 Internal warning: TCP session
[state: 2, inactive for 79 seconds] between XXX.XX.XXX.XXX/80 and
192.168.1.104/1170 timed out due to inactivity
Jul 03 11:19:12.909 esquire kernel: 301 Internal warning: TCP session
[state: 2, inactive for 64 seconds] between XXX.XX.XXX.XXX/80 and
192.168.1.104/1169 timed out due to inactivity
Jul 03 11:19:12.939 esquire emroute[3168]: 100 Info: The Symantec Enterprise
VPN Client Routing Daemon is starting.
Jul 03 11:19:13.390 esquire vpn: 401 Internal error: can't set interface
parameters for IP address 192.168.1.104
Jul 03 11:19:13.390 esquire vpn: 343 Interfaces Warning: The interface
192.168.1.104 was configured, but was not found on the firewall.
Jul 03 11:19:42.452 esquire emapi[4036]: 100 Symantec Enterprise VPN Client
Info: Entering EMAPI initial wait state.
Jul 03 11:19:42.512 esquire vpnd[3816]: 117 Daemon starting
Jul 03 11:19:42.542 esquire vpn: 401 Internal error: can't set interface
parameters for IP address 192.168.1.104
Jul 03 11:19:42.542 esquire vpn: 343 Interfaces Warning: The interface
192.168.1.104 was configured, but was not found on the firewall.
Jul 03 11:19:42.562 esquire isakmpd[3812]: 117 isakmpd Info: Daemon starting
Jul 03 11:19:42.622 esquire isakmpd[3812]: 120 isakmpd Info: Not waiting for
Mobile
Jul 03 11:19:43.623 esquire isakmpd[3812]: 120 isakmpd Info: Reloading
tunnels to vpnd with 3 sec wait.
Jul 03 11:19:43.633 esquire isakmpd[3812]: 120 isakmpd Info: Reloading
tunnels to RaptorMobile with 3 sec wait.
Jul 03 11:19:44.625 esquire isakmpd[3812]: 120 isakmpd Info: Cannot find
entrust config file C:\Program Files\Symantec\VPNClient\entrust.cf. Will use
default configuration.
Jul 03 11:19:44.975 esquire isakmpd[3812]: 120 isakmpd Info: IKMPLogin:
Switched to lite mode, cannot access CA directory
Jul 03 11:19:44.975 esquire isakmpd[3812]: 120 isakmpd Info: Try to turn off
crl validation...
Jul 03 11:19:44.985 esquire isakmpd[3812]: 120 isakmpd Info: Successfully
logged into the ISAKMP engine with a default profile which has no
Certificate support
Jul 03 11:19:44.985 esquire isakmpd[3812]: 120 isakmpd Info: Reconfiguring
Isakmp tunnels
Jul 03 11:19:44.995 esquire emapi[4036]: 100 Symantec Enterprise VPN Client
Info: Continue operation.
Jul 03 11:19:44.995 esquire isakmpd[3812]: 120 isakmpd Info: Reloading
tunnels to RaptorMobile with 15 sec wait.
Jul 03 11:19:49.241 esquire emapi[4036]: 100 nsetup Trace: Session
Notification enabled.
Jul 03 11:19:49.492 esquire isakmpd[3812]: 120 isakmpd Info: Reconfiguring
Isakmp tunnels
Jul 03 11:19:49.542 esquire emapi[4036]: 100 nsetup Trace: Connecting
security gateway XXX.XX.XXX.XXX
Jul 03 11:19:49.552 esquire emapi[4036]: 100 nsetup Trace: Retrieving
configuration for gateway XXX.XX.XXX.XXX
Jul 03 11:19:50.093 esquire isakmpd[3812]: 120 isakmpd Info: Initiator,
Established ISAKMP SA (Lsg=192.168.1.104, Rsg=XXX.XX.XXX.XXX),
[tunTemplate=Universal]
Jul 03 11:19:51.314 esquire emapi[4036]: 100 Symantec Enterprise VPN Client
Info: Downloaded secure tunnel (10.1.0.0/255.255.0.0).
Jul 03 11:19:51.314 esquire emapi[4036]: 100 Symantec Enterprise VPN Client
Info: Downloaded secure tunnel (10.2.100.0/255.255.255.0).
Jul 03 11:19:51.324 esquire emapi[4036]: 100 Symantec Enterprise VPN Client
Info: Downloaded secure tunnel (10.10.210.0/255.255.255.0).
Jul 03 11:19:51.334 esquire emapi[4036]: 100 Symantec Enterprise VPN Client
Info: Downloaded secure tunnel (10.32.0.0/255.255.0.0).
Jul 03 11:20:23.491 esquire emapi[4036]: 400 Symantec Enterprise VPN Client
Error: Communications with the ISAKMP daemon failed.
Jul 03 11:20:24.792 esquire emapi[4036]: 100 nsetup Trace: Error retrieving
information. Terminating connect operation to gateway XXX.XX.XXX.XXX