Zyxel 630 HW

[Guest]

Archived from groups: comp.dcom.vpn (More info?)

Hi everyone,
I hope this is the right group to answer. I have a Zyxel 630 HW with a fixed
IP-Adress and I want to have a VPN-Connection to a certain server behind
that device. I can't get it working.
What I already did is setting the Firewall-Ports "Internet to LAN" to Any
TCP and Any UDP and vice versa "LAN to Internet" to ANy TCP and Any UDP and
I still can't reach neither the router nor the server.
What did I do wrong??
What can I do to get it working? I can't change the Hardware because it is
provided third-party.

Thanx for a solution.

 

[phoenix]

Archived from groups: comp.dcom.vpn (More info?)

On Mon, 12 Jul 2004 10:12:54 +0200, Stephan Brammen-Hüpen wrote:

> Hi everyone,
> I hope this is the right group to answer. I have a Zyxel 630 HW with a fixed
> IP-Adress and I want to have a VPN-Connection to a certain server behind
> that device. I can't get it working.
> What I already did is setting the Firewall-Ports "Internet to LAN" to Any
> TCP and Any UDP and vice versa "LAN to Internet" to ANy TCP and Any UDP and
> I still can't reach neither the router nor the server.
> What did I do wrong??
> What can I do to get it working? I can't change the Hardware because it is
> provided third-party.
>
> Thanx for a solution.

Have you forwarded the correct ports to the PC you want to conenct to? Have
a look here http://snipurl.com/7p0p for some details.

Regards

Bill

 

[Guest]

Archived from groups: comp.dcom.vpn (More info?)

"phoenix" <phoenix@fakeaddress.invalid> wrote
>
> On Mon, 12 Jul 2004 10:12:54 +0200, Stephan Brammen-Hüpen wrote:
>
> > Hi everyone,
> > I hope this is the right group to answer. I have a Zyxel 630 HW with a
fixed
> > IP-Adress and I want to have a VPN-Connection to a certain server behind
> > that device. I can't get it working.
> > What I already did is setting the Firewall-Ports "Internet to LAN" to
Any
> > TCP and Any UDP and vice versa "LAN to Internet" to ANy TCP and Any UDP
and
> > I still can't reach neither the router nor the server.
> > What did I do wrong??
> > What can I do to get it working? I can't change the Hardware because it
is
> > provided third-party.
> >
> > Thanx for a solution.
>
> Have you forwarded the correct ports to the PC you want to conenct to?
Have
> a look here http://snipurl.com/7p0p for some details.
>
> Regards
>
> Bill

I opened all the ports listed as required on the router...including 1723 and
the ports for RDP and Citrix-Traffic. When I try to connect - I get a "did
not respond" error. If I switch the machine to a local DMZ by setting the
forwarded ports list to Any TCP and Any UDP I still can't connect. I can't
seem to find the right item in the forwarding configuration. Can anyone
help?