What else do i need?

Forum Homebuilt Systems : General Homebuilt - What else do i need?

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

I've been getting components for a few weeks now, and i've pretty much finished off the list, but i was wondering what else i needed to completely build my computer...

So far i have the following
Xoxide x-ventilator case
ASUS K8VSE deluxe Motherboard
AMD Athlon 64 3700+ Clawhammer CPU
Kingston 1GB PC3200 ram
1 80mm LED fan
EVGA Geforce 6600 AGP Card
Slot cooling fan
ASUS CPU fan

Things i will be purchasing tonight:
Antec 500W Powersmart 2.0
1.44 Floppy drive
Sony DVD+/-RW drive
Vantec Fan and light controller

What else will i need to complete the computer...?

Again, you guys have helped before, thanks in advance!

Sponsored Links
Register or log in to remove.

yea >< forgot to mention Maxtor 200GB hard drive... don't take me for that much of an idiot...

Reply to Fridayunited

A couple of questions?

Are you using the onboard audio from the MB?
The memory that you purchased, is it 2x512mb or a single stick of 1gb?
This question is important since two 512mb sticks will enable dual channel while only a single will have you single channel. Dual channel is the way to go.

Hope this helps.

Reply to Ches111

Not thinking you are stupid or anything but you did not mention keyboard or mouse..

Reply to Ches111

Yea using the keyboard mouse from this computer... may upgrade to a better mouse, not sure

and my mobo >< doesn't support dual channel... or at least it doesn't say so... so its a single 1024 stick

and as far as sound card yea ill prolly use the onboard from ASUS i hear its pretty good

Reply to Fridayunited

Why are you buying a slot fan?

Just use the money on another case fan and you'll have better airflow.

Reply to purelithium

I would forgo the slot fan too and buy another stick of the exact same kind of ram. Given that your MoBo supports that current of a processor it will more than likely support Dual Channel Memory even if it is not readily apparent.

This is a pretty good bang for the buck..

Reply to Ches111

is that a socket 754 CPU? if so you may be right about not needing to go duel channel on your memory. Anyone confirm this?

Reply to zoridon

Im with ches about getting 2Gb of ram for your new rig. Believe there's a big difference with it, especially with gaming application.

Do you have Artic Silver 5 non-conductive thermal paste. Don't settle with the toothpaste looking goo that comes with the product. Highly recommend you used this for you cpu and chipset. I even disassembled my grapics and applied artic silver 5 in it. It helps lot, when it comes to heat issues.

Don't forget to use an anti-static wrist strap working with your pc.

Good Luck

Reply to chuckshissle

Dude Zoridon is correct... It is a 754 board which will not support Dual channel memory. I would seriously look into a cheaper 939 MB with support for dual channel and the newer procs...

Reply to Ches111

Actually, I did a little checking and the general consensus is that that board does not support Dual Channel Ram.

However, you may want to get a Dual Channel Kit anyway. You may perhaps upgrade to a 939 board in the future and require Dual Channel. This way you wouldn't have to worry about purchasing memory again. It wouldn't hurt to go this route even when considering new AMDs are going DDR2 this year.

Guys, would this be a bad idea?

Reply to Anoobis
Tom's Hardware > Forum > Homebuilt Systems > General Homebuilt > What else do i need?
Go to:

There are 561 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them