Kyocera FS680 will not print postcards

Archived from groups: comp.periphs.printers (More info?)

Using MS Word, I am trying to make the Kyocera printer FS 690 print
the back of a postcard.
I does not matter how I handle Word and Kyocera settings of paper
size. I put an A4 in just to see what happens and the A4 is printed in
the top left corner in landscape mode as required, just about the
correct size, but when you place a card in the printer, the left side
of the card comes out with a miserable 2 to 3 last characters of the
last 12-14 lines, in the extreme left of the card, leaving the card
nearly blank.

If I increase the margins top and left to bring the printing to the
card, the print get chewed up and only half of each line is printed
and the rest of the line is on the second line and so on.
I get to think that Kyocera is the most useless printer you can
possibly get - unless I am extremely stupid

B.Pedersen Latitude -31,48.21 Longitude115,47.40 Time=GMT+8.00
If you are curious look here http://www.mapquest.com/maps/latlong.adp