Asus P5LD2 and Cedar Mill 631

[honsbeekgmail]

Hello,

Please help overclocking this Pentium 4 631 on a ASUS P5LD2 Board I just got.
I have some questions and things I need to understand.

I have Samsung PC 5300 (667mhz) 512mb RAM in a single slot (need to get one more but prices were ridiculous, so..). On CPU-z I read that I now have overclocked the CPU at FSB 215 Mhz. running CORE speed now at a total of 3221 Mhz. At memory section I read the following : 359.1 Mhz (FSBRAM) = 3:5 . However I haven't mingled with RAM timing yet and left it at AUTO in BIOS.
In the BIOS I can not find a option that lets me set FSBRAM to 1:1 ...

I hope people have experience using this board and help me through it a little.
I also would love to know at what setting I should set PCI Express Frequency from AUTO to a value of [90 - 150] , my VGA card is an X1600pro (brand new) PCI Express type

Thank you for now

 

[honsbeekgmail]

I'm still too unfimiliar with this Board, I can't seem to get the BIOS to set CPU:RAM Operation to be 1:1. Right now CPU-z indicates that FSB_DRAM ratio is 3:5 and i have overclocked FSB to 215.5 Mhz. The CPU is Cedar Mill 631

Please tell me how I can setup BIOS to have it run 1:1 or is the current setting better? Also can you explain to me what I should do with PCI Express Frequency settings in "ADVANCE" section in this bios. I can set to to 90-150 , Voltages is not specified just the Frequency value.

thank you in advance

 

[ak47is1337]

Ironic, I plan on buying a Cedar Mill myself. Never had an ASUS board, but look for an option that reads something like "Memory to FSB" or "DRAM:FSB"
Don't touch PCI-E speeds btw, usually causes instability.