Is my Antec PS giving me bad volts????

[PCKid777]

Well, some of you may know that my dad's PC died from a power surge that fried his PSU. So, we bought an Antec Smartpower 2.0 400 Watt PSU to replace it. However, as I am looking at the volts right now (through ASUS PC Probe...), my readings are:

+12V = 12.68V
+5V = 4.838V
+3.3V = 3.28V

My main concern is the +5V line, whereas his fried Thermaltake 480 Watt PSU use to provide 4.999V. Is the Antec's voltage alright because it seems a little low??? Thanks.

PS (His PC is identical to mine, except for a stock Athlon XP 3200+, a low-end graphics card, and two SATA HDDs.)

Jonathan

 

[luminaris]

Monitor the 5V line for fluctuation as its normal for voltage to run a little lower and fluctuate. Those numbers are fine