anybody know how to solve raid-floppy problem

ratherrapid

Distinguished
Feb 9, 2006
11
0
18,510
just started up new system. trying to put raptors in Raid 0. installing raid driver from Asus MB CD to floppy in new system and get message:

"please insert your floppy to B:/. Press any Key to continue"

after press key:

"Error reading from Drive B: DOS area: drive not ready:.

If checked the floppy connects. the power is on. the connectors seem fine. i enabled everything in bios, but keep getting same message agains and again. any help appreciated.
 
Your Floppy drive should be the A drive unless you have the A drive disabled in the CMOS, you can change where you want the files from the CD written to, just use the browse feature and browse on over to the Floppy A drive and select it, and you're in business.
 

ratherrapid

Distinguished
Feb 9, 2006
11
0
18,510
txs. after much thrashing around the bios (and, there was an A-B drive 'aparent' problem), turned out to be a defective floppy drive. up and running with new system. txs. for the help. feb, kcmo.