VapoChill Light Speed Question

[pwnage]

Does any one know if the Vapochill LS will work with the Silverstone TJ07

Im building a custom box for a friend and before I buy the case I want to make sure it will work with the already bought cooler.

I have read that it will work with all standard PC cases. but to me thats not spacific enough. If theres a little modding involved I dont mind.

 

[shawnlizzle =]]

you'll need some modding at the base of the case to run the evap through

 

[pwnage]

yea i know that part. but with this full tower case is the evaporator long enough to reach the CPU.

if not is it possible to mount it up side down on top of the case?

 

[Godiva]

If you really wanted to you could, or if it wont reach the CPU through the bottom, you could cut a hole in the side and place the Vapochill next to the case. It won't look stunning, but it will work.

 

[RichPLS]

If it is a standard ATX case, then yes the cooling plate connector is long enough. The mobo is positioned the same for mid and tower cases relative to the bottom of the case.

 

[pwnage]

so your saying dispite the fact the case is taller the CPU is positioned the same in every case?

http://images10.newegg.com/NeweggImage/productimage/11-163-057-09.JPG

this is an internal shot of the case. so even though the HD's are mounted below every thing should be the same.