Archived from groups: comp.periphs.printers (More info?)

What is the difference between the Canon 3 series cartridges, eg, BCI-3eC,
as used in my older S450 printer and the 6 series, eg, BCI-6C as used in my
new Pixma ip4000? They look the same physically and are interchangeable. Is
the ink inside of a different formulation? The large capacity black are
similarly slightly different codes, both 3 series and again similar in size
and shape.

Thanks,

John B.

--
Remove <nospam> from email address to reply

Archived from groups: comp.periphs.printers (More info?)

"John B" <jbb@hawkhurst.nospamfreeserve.co.uk> wrote in message
news:cre4rh$pnq$1@newsg1.svr.pol.co.uk...
> What is the difference between the Canon 3 series cartridges, eg, BCI-3eC,
> as used in my older S450 printer and the 6 series, eg, BCI-6C as used in
> my
> new Pixma ip4000? They look the same physically and are interchangeable.
> Is
> the ink inside of a different formulation? The large capacity black are
> similarly slightly different codes, both 3 series and again similar in
> size
> and shape.
>

Slightly different formulation and density between the two.
interchanging them may result in color shift in photo prints.

Archived from groups: comp.periphs.printers (More info?)

In article <24%Cd.22915$jn.17949@lakeread06>, NOT@home.net says...
>
> "John B" <jbb@hawkhurst.nospamfreeserve.co.uk> wrote in message
> news:cre4rh$pnq$1@newsg1.svr.pol.co.uk...
> > What is the difference between the Canon 3 series cartridges, eg, BCI-3eC,
> > as used in my older S450 printer and the 6 series, eg, BCI-6C as used in
> > my
> > new Pixma ip4000? They look the same physically and are interchangeable.
> > Is
> > the ink inside of a different formulation? The large capacity black are
> > similarly slightly different codes, both 3 series and again similar in
> > size
> > and shape.
> >
>
> Slightly different formulation and density between the two.
> interchanging them may result in color shift in photo prints.
>
>
>
>

The BCI-6 cartridges will work in the older printer, but the BCI-3 cartridges
will show up as either constantly full, or constantly empty, depending on how
the ip4000 interprets the lack of the ink sensor prism on the bottom of the
cartridges.


--
Larry Lynch
Mystic, Ct.

Archived from groups: comp.periphs.printers (More info?)

Larry wrote:

>> Slightly different formulation and density between the two.
>> interchanging them may result in color shift in photo prints.
>
>The BCI-6 cartridges will work in the older printer, but the BCI-3 cartridges
>will show up as either constantly full, or constantly empty, depending on how
>the ip4000 interprets the lack of the ink sensor prism on the bottom of the
>cartridges.

Umm...the BCI-3 cartridges DO have a prism in the bottom of the ink
tanks, and they should work with the low-ink sensor just fine.

Archived from groups: comp.periphs.printers (More info?)

In article Bill says...
> >> Slightly different formulation and density between the two.
> >> interchanging them may result in color shift in photo prints.
> >
> >The BCI-6 cartridges will work in the older printer, but the BCI-3 cartridges
> >will show up as either constantly full, or constantly empty, depending on how
> >the ip4000 interprets the lack of the ink sensor prism on the bottom of the
> >cartridges.
>
> Umm...the BCI-3 cartridges DO have a prism in the bottom of the ink
> tanks, and they should work with the low-ink sensor just fine.
>
>
Original BCI-3 were updated and are now BCI-3e. There seem to be just as
many anonymous sources claiming that most BCI-3e is the same ink as BCI-
6 and offering as much evidence :-)